Page 151 of 161
4Runner_Navi_U (L/O 0308)
143
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
(a) Playing a compact disc
To insert a compact disc, push the
“OPEN” button to lower the display.
Put the compact disc in the slot with
the label side up.
The player will automatically start when
you insert the compact disc. At this time,
“CD” appears on the screen.
If the label faces down, the disc cannot
be played. In this case, “CD ERROR”
appears on the screen.
CAUTION
Do not place anything on the
opened display, as such items may
be thrown about in the compart-
ment and possibly injure people in
the vehicle during sudden braking
or in an accident.
To reduce the chance of injury in
case of an accident or sudden
stop while driving, keep the dis-
play closed.
Take care not to jam your hand
while the display is moving. Other-
wise, you could be injured.
NOTICE
Do not obstruct the display while it
is moving. It could damage your au-
dio system.
L00175
Page 152 of 161
4Runner_Navi_U (L/O 0308)
144
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
To stop and eject the compact disc, push
the “OPEN” button to lower the display.
Push the “CD
” button.
The compact disc player can play the
discs marked as shown above. The fol-
lowing products may not be playable on
your compact disc player.
Copy−protected CD
CD−R (CD−Recordable)
CD−RW (CD−Re−writable)
CD−ROM
L00176
(b) Selecting a desired track
“SEEK/TRACK” button: Use for a direct
access to a desired track.
Push either side of the “SEEK/TRACK”
button and hold it until the desired track
number appears on the screen. As you
release the button, the player will start
playing the selected track from the begin-
ning.
Fast forward: Touch the “
” switch and
hold it to fast forward the disc. When you
release the switch, the compact disc
player will resume playing from that posi-
tion.
Page 156 of 161
4Runner_Navi_U (L/O 0308)
148
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
1. Volume control button
Push “+” to increase the volume. The
volume continues to increase while the
button is being pressed.Push “−” to decrease the volume. The
volume continues to decrease while the
button is being pressed.
2. “” button (Seek, search, track)
Radio
This switch has the following features—
To select a preset station:
Quickly push and release the “” or “”
side of the switch. Do this again to select
the next preset station.
To seek a station:
Push and hold the “” or “” side of the
switch until you hear a beep. Do this
again to find the next station. If you push
the switch on either side during the seek
mode, seeking will be cancelled.
Cassette tape player
This switch has the following features—
To skip to a different track in either direc-
tion:
Quickly push and release the “” or “”
side of the switch. “FF 1” or “REW 1” will
appear on the display.Next, push either side of the track switch
until the track you want to listen to is
set. If you push the switch ten times, the
skip function will turn off. (You can skip
up to nine tracks at a time.)
When counting the number of the tracks
you want to rewind, remember to count
the current track as well. For example, if
you want to rewind to a song that is two
before the song you are listening to,
push the “” side of the button three
times.
If you push the track button further than
you wanted to, push the other side of the
button. The track number will be in-
creased or reduced.
The track number you select is not valid
if it is higher than the number of the
tracks remaining on the current side of
the cassette.
When the tape reaches to the begin-
ning, the player will automatically start
playing that side.
After the tape reaches to the end, the
player will automatically reverse and
start playing the other side.
Page 157 of 161
4Runner_Navi_U (L/O 0308)
149
2004 4RUNNER Navigation from Aug. ’03 Prod. (OM35813U)
There must be at least 3 seconds of
blank space between tracks for the
switch to work correctly. In addition, the
feature may not work well with some spo-
ken, live, or classical recordings.
To f a s t−forward or reverse:
Push and hold the “” side of the switch
to fast−forward a cassette tape. “FF” will
appear on the display. Push and hold the
“” side of the switch to rewind a tape.
“REW” will appear on the display.
To stop the tape while it is fast−forward-
ing, push the “” side of the switch. To
stop the tape while it is rewinding, push
the “” side of the switch.
If a tape rewinds completely, the cassette
player will stop and then play that same
side. If a tape fast−forwards completely,
the cassette will play the other side of
the tape using the auto−reverse feature.
Compact disc player
Use this switch to skip up or down to a
different track in either direction.
Quickly push and release the “” or “”
side of the switch until the track you
want to listen to is set. If you want to
return to the beginning of the current
track, push the “” side of the switch
once, quickly.
