2004 Peugeot Partner VU Dag clutch

9YOUR PARTNER AT A GLANCE
22-12-2003
9
STEERING WHEEL HEIGHT ADJUSTMENT  When stationary, push the control Aforwards to unlock
the steering wheel.
 Adjust the height of the steer-ing wheel.
 Lock it by pulling control A
towards you fully.
76
CRUISE CONTROL The cruise control makes it possi- ble to maintain a constant vehiclespeed, programmed by the driv-
er, irrespective of the profile ofthe road and without any action
on the accelerator or the brakepedals. In order for the vehicle speed to be memorised, it must be greater thanapproximately 25 mph (40 km/h)and fourth or fifth gear must beengaged.
To activate  Place the knob 1in the ON
position.
A speed can now be memo- rised.  Place the knob 1in the OFF
position to deactivate the system.
Memorising a speed When you reach the required speed, press button 2or 3. The
speed is memorised and will be
maintained automatically.
Deactivatingthe memorised speed If you wish to deactivate the memorised speed:  press button 4or the brake or
clutch pedal.
Recalling the memorised speed After deactivation, press button 4 . Your vehicle reverts to the last
memorised speed. Cancelling the stored speed  Place the knob 1 in the OFF
position or switch off the ignition.
81

YOUR PARTNER IN DETAIL81
22-12-2003
CRUISE CONTROL Cruise control enables the vehicle to maintain a steady speed programmed
by the driver, regardless of the roadcharacteristics and without the driverhaving to touch the accelerator orbrake pedals. In order for it to be memorised, the vehicle speed must be greater than25 mph (40 km/h), and fourth gear atleast must be engaged.Operation 
Place switch 1in the ONposition.
A speed can be memorised. Place switch 1in the OFF position
to cancel.
Memorising a speedAs soon as you reach the chosen speed, press button 2or 3. This
memorises the speed, which will be
maintained automatically. Note: It is possible to accelerate and
drive momentarily at a speed greater than the memorised speed. Whenthe accelerator pedal is released, thevehicle will return to the memorisedspeed.
Cancelling the memorised speed If you wish to cancel the memorised speed:  press button 4or the brake or clutch
pedal.
Recalling the memorised speedAfter cancellation, press button 4.
Your vehicle will return to the last memorised speed. Changing a memorised speed
To memorise a speed higher than the previous one: 
press button 3;
 release it when you have reached the required speed.
To memorise a speed lower than theprevious one:  press button 2;
 release it when you have reached the required speed.
Cancelling the cruise control  Place switch 1in the OFFposition
or switch off the ignition.
Do not use cruise control on slippery roads or in heavytraffic.

PRACTICAL INFORMATION99
22-12-2003
Fuse N¡ Rating
Functions
1 10 A Pre-heat unit (diesel) - Brake and clutch switches - Reversing lights.
2 15 A Fuel pump.
3 10 A ABS control unit.
4 10 A Engine control unit.
5Ð Not used.
6 15 A Front fog lamps.
7 20 A Headlamp wash pump.
8 20 A Fan assembly relay - Engine control unit.
9 15 A Left-hand dipped beam.
10 15 A Right-hand dipped beam.
11 10 A Left-hand main beam.
12 10 A Right-hand main beam.
13 15 A Horns.
14 10 A Front and rear windscreen wash pumps.
15 30 A Oxygen sensor - Air flow sensor.
16 30 A Air pump relay.
17 30 A Front windscreen wiper.
18 40 A Air conditioning fan.