2004 NISSAN SENTRA engine oil

[x] Cancel search: engine oil

Page 166 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual Windshield wiper and washer*Check that
the wipers and washer operate properly and that
the wipers do not streak.
Windshield defrosterCheck that the air
comes out of the defroster outlets properly and

Page 167 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual When performing any inspection or maintenance
work on your vehicle, always take care to prevent
serious accidental injury to yourself or damage to
the vehicle. The following are general precau-
tions

Page 168 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual QG18DE engine
1. Engine oil filler cap
2. Spark plug caps/ignition coils
3. Brake fluid reservoir
4. Clutch fluid reservoir (M/T model)
5. Air cleaner
6. Battery
7. Fuse/Fusible link box
8. Radiator c

Page 169 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual QR25DE engine
1. Engine oil filler cap
2. Spark plug caps
3. Brake fluid reservoir
4. Clutch fluid reservoir (M/T model)
5. Air cleaner
6. Battery
7. Fuse/Fusible link box
8. Radiator cap
9. Engine oi

Page 173 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual CHECKING ENGINE OIL LEVEL
1. Park the vehicle on a level surface and apply
the parking brake.
2. Start the engine and let it idle until it reaches
operating temperature.
3. Turn off the engine.Wait mo

Page 174 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual 6. Recheck oil level with the dipstick.
It is normal to add some oil between oil
maintenance intervals or during the
break-in period, depending on the severity
of operating conditions.
CAUTION
Oil lev

Page 175 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual cTry to avoid direct skin contact with
used oil. If skin contact is made, wash
thoroughly with soap or hand cleaner
as soon as possible.
cKeep used engine oil out of reach of
children.
CAUTION
Be care

Page 176 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual CAUTION
Be careful not to burn yourself. The engine
oil may be hot.
5. Wipe the engine oil filter mounting surface
with a clean rag.
Be sure to remove any old gasket material
remaining on the mounting
Page:   < prev 1-8 9-16 17-24 25-32 next >