2004 NISSAN PATROL engine oil

DIAGNOSTIC PROCEDURE (MODELS WITH TD
ENGINE)
SYMPTOM: Magnet clutch does not engage when A/C switch
and fan control dial are ON.
CHECK POWER SUPPLY FOR COM-
PRESSOR.
Disconnect compressor harness connec-
tor.
Do approx. 12 volts exist between com-
pressor harness terminal No.j
1and
ground?
No
cYe s
Check magnet clutch coil.
NG
Replace magnet clutch.
Refer to HA-178 in Y61
SERVICE MANUAL, publi-
cation No. SM7E-2Y61G1.
Disconnect A/C cut relay.
Note
CHECK CIRCUIT CONTINUITY
BETWEEN A/C CUT RELAY HARNESS
CONNECTOR TERMINAL NO.j
3AND
COMPRESSOR HARNESS CONNECTOR
TERMINAL NO.j
1.
Continuity should exist.
If OK, check harness for short.
OK
CHECK A/C CUT RELAY.
Refer to HA-4051.
OK
cNG
Replace A/C cut relay.
Note
CHECK CIRCUIT CONTINUITY
BETWEEN A/C RELAY HARNESS CON-
NECTOR TERMINAL NO.j
7AND A/C
CUT RELAY HARNESS CONNECTOR
TERMINAL NO.j
4.
Continuity should exist.
If OK, check harness for short.
OK
j
A
(Go to next page.)
Note:
If the result is NG or No after checking circuit continuity, repair harness
or connector.
RHA392I
SHA579F
SHA580F
RHA393I
.
.
.
.
.
.
TROUBLE DIAGNOSESAUTO
Magnet Clutch (Cont'd)
HA-4046

DIAGNOSTIC PROCEDURE (MODELS WITH ZD
ENGINE)
SYMPTOM: Magnet clutch does not engage when A/C switch
and fan control dial are ON.
CHECK POWER SUPPLY FOR COM-
PRESSOR.
Disconnect compressor harness connector.
Do approx. 12 volts exist between compres-
sor harness connector terminal No.j
1and
ground?
No
cYe s
Check magnet clutch coil.
NG
Replace magnet clutch.
Refer to HA-178 in Y61
SERVICE MANUAL, publi-
cation No. SM7E-2Y61G1.
Disconnect A/C relay.
Note
CHECK CIRCUIT CONTINUITY
BETWEEN A/C RELAY HARNESS CON-
NECTOR TERMINAL NO.j
7AND COM-
PRESSOR HARNESS CONNECTOR TER-
MINAL NO.j
1.
Continuity should exist.
If OK, check harness for short.
OK
CHECK POWER SUPPLY FOR A/C
RELAY.
Disconnect A/C relay.
Do approx. 12 volts exist between A/C
relay harness connector terminal Nos.j
1,
j6and ground?
Ye s
cNo
Check power supply circuit
and 10A or 20A (No.
)
located in the fuse block
(J/B).
Refer to EL section (ªWiring
Diagramº, ªPOWER SUP-
PLY ROUTINGº).
CHECK A/C RELAY AFTER DISCON-
NECTING IT.
Refer to HA-119 in Y61 SERVICE
MANUAL, publication No. SM7E-2Y61G1.
OK
cNG
Replace A/C relay.
jA(Go to next page.)
Note:
If the result is NG or No after checking circuit continuity, repair harness or
connector.
RHA399I
SHA579F
RHA653GA
RHA654G
.
.
.
.
.
.
TROUBLE DIAGNOSESAUTO
Magnet Clutch (Cont'd)
HA-4049

MAINTENANCE
SECTION
MA
MODIFICATION NOTICE:
+ SAE Viscosity Number charts for engine oil have been revised for Europe.
+ Caution on the air cleaner ®lter installation for TB engine has been added.
CONTENTS
RECOMMENDED FLUIDS AND LUBRICANTS .......4002
SAE Viscosity Number ..........................................4002 TB45E, TB48DE
ENGINE MAINTENANCE
..........................................4003
Cleaning and Changing Air Cleaner Filter.............4003
MA-4001

Final Drive
GENERAL SPECIFICATIONSBody typeWagon
Engine TB45E TB48DE ZD30DDTi TD42
Transmission 5M/T 5A/T 5M/T 4A/T 5M/T
Front ®nal driveStandard
H233B
2-pinion
Gear ratio 4.111 4.375 3.545 4.111 4.375 4.111
Number of teeth (Drive
gear/drive pinion)37/9 35/8 39/11 37/9 35/8 37/9
Oil capacity (Approx.)
!(Imp pt)5.4 (9-1/2)
Rear ®nal drive
[Grade]Standard Optional Standard Optional Standard Optional Standard Optional Standard Standard
H233B H260 H233B H233B
4-pinion LSD Diff. lock 4-pinion Diff. lock 4-pinion Diff. lock LSD Diff. lock 4-pinion
Gear ratio 4.111 4.375 3.545 4.111 4.375 4.111
Number of teeth (Drive
gear/drive pinion)37/9 35/8 39/11 37/9 35/8 37/9
Oil capacity (Approx.)
!(Imp pt)2.4 (4-1/4) 2.1 (3-3/4) 3.0 (5-1/4) 4.7 (8-1/4) 3.7 (6-1/2) 2.4 (4-1/4) 3.0 (5-1/4) 2.1 (3-3/4) 3.0 (5-1/4) 2.4 (4-1/4)
SERVICE DATA AND SPECIFICATIONS (SDS)
PD-4002

Body typeHardtop
Engine TB45EZD30DDTi
Transmission 5M/T 5M/T 4A/T
Front ®nal driveStandard
H233B
2-pinion
Gear ratio 4.1114.375
Number of teeth (Drive
gear/drive pinion)37/935/8
Oil capacity (Approx.)
!(Imp pt)5.4 (9-1/2)
Rear ®nal drive
[Grade]Standard Optional Standard Optional Standard
H233B
4-pinion Diff. lock LSD Diff. lock Diff. lock
Gear ratio 4.1114.375
Number of teeth (Drive
gear/drive pinion)37/935/8
Oil capacity (Approx.)
!(Imp pt)2.4 (4-1/4) 3.0 (5-1/4) 2.1 (3-3/4) 3.0 (5-1/4) 3.0 (5-1/4)
SERVICE DATA AND SPECIFICATIONS (SDS)
Final Drive (Cont'd)
PD-4003