2004 NISSAN PATHFINDER key

[x] Cancel search: key

Page 148 of 184

NISSAN PATHFINDER 2004 R50 / 2.G Navigation Manual 2. Select theRoute Info key. 3. Select theTurn List key. A list of destinations, waypoints and guide points
will be displayed. Guidance will be made at each
guide point which direction to turn.
The di

Page 149 of 184

NISSAN PATHFINDER 2004 R50 / 2.G Navigation Manual INFO:
cIn the turn list, turning points more than 60
miles (100 km) away from the current vehicle
location will not be displayed.
cWhen calculated routes include a freeway, in-
formation about freeway

Page 150 of 184

NISSAN PATHFINDER 2004 R50 / 2.G Navigation Manual 3. Select theRoute Simulation key. The screen will display a simulated drive with
voice guidance on the suggested route to the
destination.
4. When the DEST button is pressed, or the
vehicle starts to

Page 151 of 184

NISSAN PATHFINDER 2004 R50 / 2.G Navigation Manual 2. The [ROUTE INFO.] screen will be
displayed.
Select the
Cancel Simulation key.
INFO:
When the DEST button is pressed, or the ve-
hicle starts to run, the route simulation will be
canceled.
INFO:
If

Page 152 of 184

NISSAN PATHFINDER 2004 R50 / 2.G Navigation Manual 3. Select theTracking On/Off key. 4. Select theOn key. 5. Press the MAP button.
The location of the vehicle will be displayed.
INFO:
cYou can select the
On key to display the
tracking marks (O) , and

Page 153 of 184

NISSAN PATHFINDER 2004 R50 / 2.G Navigation Manual The following GPS information will be displayed
on the screen: latitude, longitude, altitude, signal
reception, and satellite locations.
1. Press the SETTING button.
2. Select the
Navigation key on th

Page 154 of 184

NISSAN PATHFINDER 2004 R50 / 2.G Navigation Manual INFO:
cThe satellite with the stronger signal will be in-
dicated in green.
cThe display will read, [3-dimensional
positioning], [2-dimensional positioning], or
[positioning not possible], depending o

Page 155 of 184

NISSAN PATHFINDER 2004 R50 / 2.G Navigation Manual 3. Select theAdjust Current Location key on
the [NAVIGATION SETTINGS] screen.4. Align the correct location to the cross point
on the map using the joystick, and select
the
Set key. The current locatio