2004 MITSUBISHI LANCER EVOLUTION VIII ECU

GENERAL INFORMATION - VEHICLE IDENTIFICATION0-2
Model
codeClass
code2004
codeGrade Engine model Transmission
modelFuel
supply
system
GH-CT9A SNDFZ!
RS W5M51
(4WD, 5M/T)
SJDFZ!
RS
SJGFZ!
GSR4G63 (2000
DOHC 16-valve
intercooler turbo)
W6MAA
(4WD, 6M/T)MPI
Connector
CodeName Page Details of Change
BEngine transmission p.1-2• Due to changes in the engine control system, the
name of the wastegate solenoid valve (B-30) has
been changed to “wastegate solenoid valve 1”, and
an additional wastegate solenoid valve 2 (B-32) has
been added.
• The 4WD-ECU (C-37, 38) has been moved from
the instrument panel harness to the control harness.
• With the removal of the DVD-MMCS, the following
connectors have been removed.

• Multi-centre display (C-11, 12)

• Navigation unit (C-47)
The immobiliser ECU (C-54) has also been removed,
due to changes in the engine immobiliser system.
CInstrument panel p.1-4
• With the removal of the DVD-MMCS, the following
connectors have been removed.

• Audio unit (C-102)

• Hazard switch (C-105)
FBoot interior p.1-6• Spare connector (F-28) added.
Changed part Page Details of change
ECU p.2-2• With changes in the engine immobiliser system, the
installation position of the immobiliser ECU has been
changed.
Solenoid valve p.2-2• With the addition of the wastegate solenoid valve 2, a
new installation point has been provided.
VEHICLE IDENTIFICATION
M3000000100845
Note:


denotes a continued model
IMPLEMENTATION CODE
M3000001000584
GH-CT9A ; CT9A-0300001 ~
DETAILS OF CHANGES
Wiring diagrams
M3000003000159
Component installation positions
M3000004000141

GENERAL INFORMATION - DETAILS OF CHANGES0-3
Main circuit Name of circuit Page Details of change
J/C - p.3-2• Partial changes to circuit and
destination system names in J/C(1) —
(6)
-• With the introduction of manual air
conditioning, the circuit used by the
fusible link No.2 has been changed.
• Wastegate solenoid valve 2 added to
load of special fuse No.3.
• Rating of special fuse No.10 changed
from 15A to 20A.
Power supply - p.3-10• Partial changes to destination system
names.
• Earth No.13 added.
• Rating of special fuse No.10 changed
from 15A to 20A.
• Partial changes to circuit details, due
to removal of sunroof.
Engine control - p.3-16• Rating of special fuse No.10 changed
from 15A to 20A.
• Earth No.13 added.
• Some changes to circuit, due to
addition of wastegate solenoid valve
2 (B-32).
• Partial changes, due to removal of
DVD-MMCS
Lighting Interior lights, boot interior
light, ignition key cylinder
illumination light, door not
closed indicator light-• Change to terminal number in J/C(2)
(C-119) on line linking ETACS and
diagnosis connector. (No.1 " No.5)
Reversing lights -• Change to terminal number in J/C(2)
(C-119) on line linking reversing light
and rear combination light (LH).
(No.18 " No.19)Signal
Stop lights p.3-24• Spare connector (F-28) added, and
circuit partially changed.
Meters / Gauges -Meters
Remaining fuel warning
light, oil pressure warning
light, brake warning light,
seatbelt warning light-• Change to terminal number in J/C(1)
(C-07) on line inking J/B (general fuse
No.18) and combination meter. (No.4
" No.8)
• Change to terminal number in J/C(4)
(C-110) on line linking combination
meter and fuel gauge unit (sub).
(No.20 " No.21)
Door opening
controlElectric windows -• Change to terminal number in J/C(2)
(C-119) on line linking power window
main switch and diagnosis connector.
(No.12 " No.14)
Fully automatic air
conditioning-• Change to terminal number in J/C(1)
(C-07) on line linking J/B (general
fuse No. 18) and A/C-ECU. (No.6 "
No.4)
• Change to terminal number in J/C(5)
(C-06) on line linking A/C-ECU and
diagnosis connector. (No.8 " No.9)Air
conditioning
Manual air conditioning p.3-26• With the adoption of manual air
conditioning, a new circuit has been
installed.
Windscreen wipers and
washers-Safety and
visibility
Electric retractable remote
control door mirrors-• Change to terminal number in J/C(2)
(C-119) on line linking ETACS and
diagnosis connector. (No.1 " No.5)
Circuit diagrams
M3000004500157

GENERAL INFORMATION - DETAILS OF CHANGES0-4
Main circuit Name of circuit Page Details of change
Spare Audio connectors -• Change to terminal number in J/C(1)
(C-07) on line inking J/B (general fuse
No.18) and spare audio connector.
(No.3 " No.7)Accessories
Clock -• Change to terminal number in J/C(1)
(C-07) on line inking J/B (general fuse
No.18) and clock. (No.2 " No.6)
Special
EquipmentABS p.3-32
ACD (Vehicles not fitted with
AYC)p.3-40• Circuit changed due to change in
branching point of connector for
4WD-ECU (C-37) (C-38) (from
instrument panel harness to control
harness).
• J/C(6) (C-23) added between ABS-
ECU and 7
th terminal of junction
connector (C-20) between instrument
panel harness and control harness.
• J/C(6) (C-23) added between ABS-
ECU and 22
nd terminal of junction
connector (C-22) between instrument
panel harness and control harness.
ACD, AYC p.3-48• Circuit changed due to change in
branching point of connector for
4WD-ECU (C-37) (C-38) (from
instrument panel harness to control
harness).
• Earth No.13 added
• J/C(6) (C-23) added between 4WD-
ECU and 7
th terminal of junction
connector (C-20) between instrument
panel harness and control harness.
• J/C(6) (C-23) added between 4WD-
ECU and 22
nd terminal of junction
connector (C-22) between instrument
panel harness and control harness.
Intercooler water spray -• Change to terminal number in J/C(1)
(C-07). (No.12 " No.21).
Engine immobiliser system p.3-58• Partial changes due to removal of
DVD-MMCS.
• Partial changes to circuit, due to
change in installation point of
immobiliser ECU.
Spare general connectors -• Change to terminal numbers in J/C(1)
(C-07) on line linking J/B (general
fuse No.18) / special fuse No.15, and
general spare connectors. (No.7 "
No.5), (No.21 " No.12).

GENERAL INFORMATION - LIST OF CIRCUIT DIAGRAMS0-6
Main circuit Name of Circuit Circuit Diagram
Windscreen wipers, washers *2!
Rear wiper, washer!
Demister (vehicle not fitted with fully automatic A/C)!
Demister, door mirror heating elements (vehicle fitted with
fully automatic A/C)!
Safety / Visibility
Electric retractable remote control door mirrors *2
!
Spare Audio connectors *1,2!
DVD-MMCS X
Clock *1,2!
Accessories
Cigar lighter, ashtray illumination light
!
ABS#
ACD (vehicle not fitted with AYC)#
ACD, AYC#
SRS airbags, seatbelt pre-tensioners (vehicle not fitted
with side airbags)!
SRS airbags, seatbelt pre-tensioners (vehicle fitted with
side airbags)!
Sun roof X
Ignition key reminder buzzer!
Intercooler water spray *2!
Engine immobiliser system#
Security alarm!
Spare connectors for fog lights!
Special Equipment
Spare general connectors *2
!

WIRING DIAGRAMS - INSTRUMENT PANEL1-4
INSTRUMENT PANEL
C-01 (4) Register (vehicle not fitted with full auto
A/C)
C-02 (2-red) Front pass. seat airbag module (squib)
C-03 (7) Internal / external air changeover damper
motor
C-04 (7) Junction between instrument panel
harness and A/C harness (vehicle not
fitted with full auto A/C)
(13) Junction between instrument panel
harness and A/C harness (vehicle fitted
with full auto A/C)
C-05 (2) Air thermo sensor (vehicle fitted with full
auto A/C)
C-06 (13) J/C (5)
C-07 (22-grey) J/C (1)
C-08 (6) Air mix door motor and potentiometer
(vehicle with full auto A/C)
C-09 (2) Heater water temperature sensor (vehicle
with full auto A/C)
C-10 (5) Blower outlet changeover damper motor
& potentiometer (vehicle with full auto
A/C)C-13 (4) Clock
C-14 (4) Hazard switch
C-15 (6) Blower switch
(vehicle not fitted with full auto A/C)
C-16 (12-black) Heater control unit
(vehicle with heater) or A/C-ECU
(vehicle with manual A/C)
C-17 (20-black) A/C-ECU (vehicle with full auto A/C)
C-18 (16-black) A/C-ECU (vehicle with full auto A/C)
C-20 (22-blue) Junction between instrument panel
harness and control harness
C-21 (10-grey) Junction between instrument panel
harness and control harness
C-22 (25) Junction between instrument panel
harness and control harness
Connector
symbolFront passenger’s side
Instrument panel harness
Tweeter sub-harness
Front
harness (LH)
Front door
harness (LH)
Floor
harness (LH)
A/C harness
Control
harness

WIRING DIAGRAMS - INSTRUMENT PANEL1-5
C-23 (33) J/C (6)
C-28 (2) Blower motor
(Vehicle not fitted with full auto A/C)
(6) Blower pulse controller
(Vehicle fitted with full auto A/C)
C-29 (13) Junction between instrument panel
harness & floor harness (LH)
C-30 (11-grey*) Junction between instrument panel
harness & floor harness (LH)
C-31 (25) Junction between instrument panel
harness & front harness (LH)
C-32 (3) Junction between instrument panel
harness & front harness (LH)
C-33 (16) Junction between instrument panel
harness & front door harness (LH)
C-34 (16) Junction between control harness & front
harness (LH)
(22) 4WD-ECU(26) 4WD-ECU
C-43 (1-grey) Junction between control harness and
floor harness (LH)
C-44 (2) Junction between instrument panel
harness and tweeter sub-harness
C-45 (2) Tweeter (LH)
C-49 (35-grey) Engine ECU
C-50 (28-grey) Engine ECU
C-51 (30-grey) Engine ECU
C-55 (2) Spare connector
Note :
• A connector colour marked * indicates the male connector.
The female connector is black.
• Boxed connector numbers indicate connectors in harness
routes that have been changed.C-38
C-37

2-1
SECTION 2
COMPONENT INSTALLATION
POSITIONS
CONTENTS
ECU ..........................................................2-2 Solenoid Valves ......................................2-2

COMPONENT INSTALLATION POSITIONS - ECU2-2
ECU
Immobiliser
ECU
Wastegate solenoid
valve 1
BatteryWastegate solenoid valve 2