&'()(*+
#
AC400266
N
Denotes tightening torque.
If there is no indication of
tightening torque, refer to
tightening torque.Indicates the
group title.Indicates the
section title.
Indicates the
group number.
Indicates the page number.
Indicates procedures to be performed be-
fore the work in that section is started, and
procedures to be performed after the work
in that section is finished.
Component diagram
A diagram of the component parts is pro-
vided near the front of each section in order
to give the reader a better understanding of
the installed condition of component parts.
Mark denotes non-reusable part.
Repair kit or parts sets are shown.
(Only very frequently used parts are shown.)
Removal steps :
The part designation number corresponds to
the number in the illustration to indicate removal
steps.
Disassembly steps :
The part designation number corresponds to
the number in the illustration to indicate dis-
assembly steps. Maintenance and servicing procedures
The numbers provided within the diagram indicate the
sequence for maintenance and servicing procedures.
AB
Installation steps :
Specified in case installation is impossible in
reverse order of removal steps. Omitted if
installation is possible in reverse order of
removal steps.
Assembly steps :
Specified in case installation is impossible in
reverse order of removal steps. Omitted if
assembly is possible in reverse order of
disassembly steps.
