2004 MERCEDES-BENZ S430 fuel additives

ContentsTechnical data.................................. 377
Spare parts service ............................ 378
Warranty coverage ............................. 379
Loss of Service and Warranty
Information Booklet...................... 379
Identification labels............................ 380
Layout of poly-V-belt drive ................. 381
S 430 / S 500 (all models)........... 381
S 55 AMG ..................................... 381
S 600 ........................................... 381
Engine ................................................ 382
Rims and tires .................................... 384
Same size tires ............................. 385
Mixed size tires ............................ 387
Spare wheel ................................. 388
Electrical system................................ 389
Main dimensions and weights............ 390
Main dimensions .......................... 390
Weights ........................................ 390Fuels, coolants, lubricants, etc. ......... 391
Capacities .................................... 391
Engine oils.................................... 393
Engine oil additives ...................... 393
Air conditioning refrigerant .......... 393
Brake fluid .................................... 394
Premium unleaded gasoline ......... 394
Fuel requirements ........................ 394
Gasoline additives ........................ 395
Coolants....................................... 395
Windshield and headlamp washer
system ......................................... 398
Consumer information ....................... 399
Uniform tire quality grading ......... 399
Technical terms............................... 401Index................................................. 407

393 Technical data
Fuels, coolants, lubricants, etc.
Engine oils
Engine oils are specifically tested for their
suitability in our engines. Therefore, only
use engine oils approved by
Mercedes-Benz. Information on approved
brands is available in the Factory Approved
Service Products pamphlet, or at an autho-
rized Mercedes-Benz Center.
Please follow FSS recommendations for
scheduled oil changes. Failure to do so
could result in engine damage not covered
by the Mercedes-Benz Limited Warranty.
Engine oil additives
Do not blend oil additives with engine oil.
They may damage the engine.
Damage or malfunctions resulting from
blending oil additives are not covered by
the Mercedes-Benz Limited Warranty.Air conditioning refrigerant
R-134a (HFC) refrigerant and special PAG
lubricating oil is used in the air condition-
ing system.
Never use R-12 (CFC) or mineral-based lu-
bricating oil. Otherwise damage to the
system will occur.
!Always check the oil filler cap
(page 277) for important information
pertaining to the engine oil needing to
meet a specific Mercedes-Benz specifi-
cation (e.g. MB 229.5). If such informa-
tion is printed on the oil filler cap, only
use an engine oil from the list of ap-
proved engine oils in the Factory Ap-
proved Service Products pamphlet that
meets the specification indicated on
the oil filler cap.
Using engine oils of other specification
may cause the FSS to incorrectly deter-
mine the next service interval and will
result in engine damage not covered by
the Mercedes-Benz Limited Warranty.

395 Technical data
Fuels, coolants, lubricants, etc.
Gasoline additives
A major concern among engine manufac-
turers is carbon build-up caused by gaso-
line. Mercedes-Benz recommends only the
use of quality gasoline containing additives
that prevent the build-up of carbon depos-
its.
After an extended period of using fuels
without such additives, carbon deposits
can build up especially on the intake valves
and in the combustion area, leading to en-
gine performance problems such as:

Warm-up hesitation


Unstable idle


Knocking / pinging


Misfire


Power lossDo not blend any specific fuel additives
with fuel. This only results in unnecessary
cost and may be harmful to the engine op-
eration.
Damage or malfunctions resulting from
poor fuel quality or from blending specific
fuel additives are not covered by the
Mercedes-Benz Limited Warranty.
Coolants
The engine coolant is a mixture of water
and anticorrosion / antifreeze, which pro-
vides:

Corrosion protection


Freeze protection


Boiling protection (by increasing the
boiling point)
The cooling system was filled at the factory
with a coolant providing freeze protection
to approximately -22°F (-30°C) and corro-
sion protection.
If the antifreeze mixture is effective to
-22°F (-30°C), the boiling point of the cool-
ant in the pressurized cooling system is
reached at approximately 266°F (130°C).