Page 126 of 173
123 Navigation*
Route guidance
Function
1
Maneuver screen
2
Name of the street onto which
you should turn
3
Distance to next maneuver
4
Distance to the destination
5
Direction to the destination
6
Estimated remaining driving time
to the destination
or
Estimated arrival time at the des-
tination
Function
7
Current road and city name
8
Current time
9
Detailed map display
a
GPS signal strength icon
b
Next maneuver icon
c
Distance to next maneuver
d
Name of street onto which you
should turn
e
Compass icon indicates the di-
rection North
Function
f
Distance to the destination
g
Direction to the destination
h
Estimated remaining driving
time to the destination
or
Estimated arrival time at the
destination
j
Current road and city name
k
Current time
l
Zoom scale
Page 127 of 173
124 Navigation*Route guidanceRoute guidance
After you select the destination and the
route is calculated, the navigation system
uses both pictorial displays and voice
prompts to guide you to the destination.
When the route is calculated, the display
switches to the map mode or to the ma-
neuver screen.The system announces “Proceed to the
highlighted Route” and the display shows
“Please Proceed”. The route is now in
progress.
While the system is guiding you on your
route, you can manually change the display
between modes. The Guidance Display
mode shows an arrow indicating the next
maneuver.
Press the joystick to the right to preview
the next maneuver. Press the joystick to
the left to return to the current maneuver.
iAfter entering the destination, you can
change to an audio source. If you have
selected the Hybrid or Arrow mode
(page 143), the Guidance Display
comes up when a maneuver is started.
The voice instructions are announced
simultaneously.
Page 128 of 173
125 Navigation*
Route guidance
The Detailed Map display shows a moving
map with the recommended route high-
lighted in blue.
Press the softkey MAP to change the
display. To activate the softkeys, press any
softkey. Voice instructions announce all maneu-
vers. The instructions are announced be-
fore a maneuver is required. For example,
you may hear an announcement, “In one
half mile, make a right turn”.
When it is time to perform the maneuver,
you will hear an announcement, “Right turn
ahead.”
To repeat the verbal announcement, press
the key.
To set the volume (
page 16).
To mute the voice instructions
(
page 126).Press the softkey LIST to display
the maneuver list. To activate the softkeys,
press any softkey.
To preview the arrow guidance screen for a
particular maneuver, use the joystick to
scroll down the list and select a maneuver
and press .
Press softkey MAP to return to the
original guidance screen or wait 10 sec-
onds and the display automatically returns
to the original guidance screen.
Page 129 of 173
126 Navigation*Route guidanceIf you programmed the address and name,
they are displayed when you reach your
final destination.Muting voice instructions
Activate the softkeys by pressing any
softkey. Press the softkey MUTE. to
mute the voice instructions. The softkey
MUTE is highlighted.
To cancel the mute function, press the
highlighted softkey MUTE.
If you press , the system gives the
current voice instruction even when MUTE
is switched on.Altering the map scale
You can increase or decrease the level of
detail in the map mode.
Press to zoom in (increase detail)
Press to zoom out (decrease de-
tail).
Page 130 of 173
127 Navigation*
Route guidance
Adding a stopover to the route
Whenever a destination is set and calculat-
ed, the system allows you to create a stop-
over along the way.
Start route guidance.
Enter a desired stopover destination.
In the Confirm Destination menu, se-
lect Add as Stopover to Route
and press .
The desired destination is added to the
route.Cancelling the current destination
To activate the softkeys, press any
softkey.
Press the softkey STOP.
A window appears confirming the stop
request.
If you wish to delete the current desti-
nation, use the joystick to select YES
and press .
The current destination is cancelled.
or
If you don’t wish to continue:
Use the joystick to select NO and
press .
Press .
Wait 10 seconds
The stop request is cancelled.Changing the route calculation mode
during guidance
Press .
Use the joystick to select ROUTE
FUNCTIONS and press .
The Route Select menu appears.
Page 131 of 173
128 Navigation*Route guidance
Use the joystick to select Change
Current Method and press .
The Change Current Method menu ap-
pears.
Use the joystick to select one of the fol-
lowing routing methods.
Quickest Route: The MCS cal-
culates the shortest and most effi-
cient way to arrive at your
destination.
Maximize Freeways: The MCS
calculates a route that makes most
efficient use of the freeways.
Minimize Freeways: The MCS
calculates a route that uses mostly
county and local roads.
Minimize Toll Roads: The
MCS calculates a route that uses
the least number of toll roads.
After selection press .
The MCS automatically returns to the
detailed map display.
Page 132 of 173
129 Navigation*
Route guidance
Viewing the maneuver list during guid-
ance
You can display the Maneuver List during
route guidance to preview upcoming turns
and street names.
Use the joystick to select ROUTE
FUNCTIONS and press .
To activate the softkeys, press any
softkey.
Press the softkey LIST.
The Maneuver List menu appears.
To preview a specific maneuver, use
the joystick to select a street name/
maneuver and press .
The maneuver screen for the selected
maneuver appears on the display.
To return to the Guidance mode, press
the softkey MAP.
or
Wait 10 seconds and the system will
automatically return to the Guidance
mode.Avoiding a road
Press .
Use the joystick to select ROUTE
FUNCTIONS and press .
The Route Select menu appears.
Page 133 of 173
130 Navigation*Route guidance
Use the joystick to select Avoid
Road and press .
The Avoid Road menu appears.
Use the joystick to select the streets
you want to avoid and press .
After you select all the streets you want
to avoid, use the joystick to select OK
to proceed and press .
The MCS returns to the Route Select
menu and recalculates the route.
iWhen you are traveling on an express-
way or a freeway, the system calculates
a new route avoiding the current road
for a distance of five miles. On county
and local roads, the system calculates a
new route avoiding the current road for
a distance of one mile.
