Page 141 of 173
138 Navigation*Destination memory
In the Confirm Destination menu, use
the joystick to select Options and
press .
The Options menu appears.
In the Options menu, use the joystick
to select Add to Today’s Plan
and press .
The Today’s Plan list is displayed and the
added destination is highlighted.
Press , the system returns to the Find
Destination menu. You can now enter a
destination to add additional entries to To-
day’s Plan.Using Today’s Plan
Press .
Use the joystick to select INPUT
DESTINATION and press .
The Find Destination by menu appears.
Use the joystick to select Today’s
Plan and press .
Page 145 of 173
142 Navigation*SettingsThe MCS allows you to change the fre-
quency of voice prompts used to guide you
to your destination.
Press .
Use the joystick to select SYSTEM
SETUP and press .
The Setup Select menu appears.
Use the joystick to select Guidance
Setup and press .
The Guidance Setup menu appears.
Use the joystick to select Voice
prompt and press .
The Voice Prompt menu appears.
Voice prompt frequency
iThe volume of the navigation voice prompt
can only be adjusted during active route
guidance. Turn the rotary push
button during an announcement, or press
Navi Voice to repeat the current/last
voice instruction and turn the rotary push
button during the announcement to adjust
the volume.
During a navigation announcement, the
volume of the audio source is lowered au-
tomatically.
Page 146 of 173
143 Navigation*
Settings
Use the joystick to select one of the fol-
lowing voice prompt frequency modes
and press .
Min: A beep tone will be heard
when approaching a maneuver.
Normal: Voice instructions are an-
nounced shortly before
approaching a maneuver. In
addition, voice instructions are
announced 1/2 a mile before a
maneuver when travelling on local
or county roads and 1 mile before a
maneuver on freeways or express-
ways.
Max: Voice instructions accompa-
nied by a beep tone are announced
at all maneuver locations. In addi-
tion, voice instructions are an-
nounced 1/2 a mile before a
maneuver when travelling on local
or county roads and 1 mile before a
maneuver on freeways or express-
ways. Once a maneuver is com-
plete, the distance to the next
maneuver is announced.
To save the settings, use the joystick to
select Return and press .The MCS allows you to choose between
three distinct guidance displays.
Press .
Use the joystick to select SYSTEM
SETUP and press .
The Setup Select menu appears. Selecting the guidance display
Page 148 of 173
145 Navigation*
Settings
The MCS allows you to display either the
estimated arrival time at, or the remaining
time to your destination.
Press .
Use the joystick to select SYSTEM
SETUP and press .
The Setup Select menu appears.
Use the joystick to select Guidance
Setup and press .
The Guidance Setup menu appears.
Use the joystick to select Est.Time
and press .
The Est. Time setup menu appears.
Use the joystick to select one of the fol-
lowing estimated time modes and
press .
Arrival: The estimated arrival
time at your destination is dis-
played.
Remaining: The remaining time
to your destination is displayed.
To save the settings, select Return
and press .
Selecting the estimated time dis-
played
Page 149 of 173
146 Navigation*SettingsThe MCS allows you to display 3 different
Point of Interest icons when the detail map
display has been selected.
Press .
Use the joystick to select SYSTEM
SETUP and press .
The Setup Select menu appears.
Use the joystick to select Display
Setup and press .
The Display Setup menu appears.
Use the joystick to select POI Icon
and press .
The POI Icon menu appears.
Selecting which Point of Interest
(POI) icons are displayed
Page 150 of 173
147 Navigation*
Settings
Use the joystick to select one of the fol-
lowing POI modes and press .
Show: The selected POI icons are
shown when you select the detail
map display.
Hide: No POI icons are displayed.
Edit: Allows you to select which
POI icons are displayed.
To save the settings, use the joystick to
select Return and press .
When you move the Present Vehicle Posi-
tion icon to any of the visible POI icons and
press , the name, address, and phone
number respective of the POI icon will be
displayed.Editing POI icons
If you select Edit a list of 6 icons ap-
pears. Use the joystick to select up to 3 of
the following icon types. After selecting
each icon, press .
ATM
Bank
Gas Station
Hotel
Parking
Restaurant and type of restaurantYou can set the map display so that north
is always referenced towards the top of the
display or the Present Vehicle Position icon
is always pointing towards the top of the
screen.
Press .
Use the joystick to select SYSTEM
SETUP and press .
The Setup Select menu appears. Setting map and screen orientation
Page 153 of 173
150 System settingsSystem settingsWhen the parking lights are turned on, the
display switches to the dark mode and au-
tomatically dims the display.
Audio mode
Press the softkey ADJ in any au-
dio menu.
The main audio adjust menu appears
and the current settings are displayed.
If you want to switch to the light mode,
press the softkey LGHT.
or
If you want to switch to the dark mode,
press the softkey DARK.
Navigation mode
Press any softkey in the naviga-
tion mode.
The softkeys are activated.
If you want to switch to the light mode,
press the softkey LGHT.
or
If you want to switch to the dark mode,
press the softkey DARK.Adjusting the brightness
in the dark mode
You can adjust the display brightness of
your MCS in conjunction with your vehicles
instrument clusters illumination.
Please refer to your Operator’s Manual for
additional instructions.
Switching between the light and the
dark mode
Page 154 of 173
151 System settings
System settings
You can set the monitor’s dimming charac-
teristics for the navigation mode.
Press .
Use the joystick to select the menu
SYSTEM SETUP and press .
Select the Display Setup menu by
pushing the joystick up or down and
press .
The display menu appears with the
current settings.
Select the Map Color menu by push-
ing the joystick up or down and press
.You can select from 3 display dimming
modes:
“Day” mode: The display colors are al-
ways bright.
“Night” mode: The display colors are al-
ways dark.
“Auto” mode: The display switches au-
tomatically between Night and Day
mode when the parking lights are
turned on and off.
After selecting the mode, press .
To return to the setup mode, use the
joystick to select Return and press
.
Setting the display dimming charac-
teristics
