2004 MERCEDES-BENZ CLK55AMG COUPE oil additives

ContentsTechnical data.................................. 375
Spare parts service ............................ 376
Warranty coverage ............................. 377
Loss of Service and Warranty
Information Booklet...................... 377
Identification labels............................ 378
Layout of poly-V-belt drive ................. 379
CLK 320/CLK 500/CLK 55 AMG . 379
Engine ................................................ 380
Rims and tires .................................... 381
Same size tires ............................. 382
Mixed size tires ............................ 383
Minispare wheel ........................... 384
Electrical system................................ 385
Main dimensions................................ 386
Weights .............................................. 387Fuels, coolants, lubricants, etc. ......... 388
Capacities .................................... 388
Engine oils.................................... 390
Engine oil additives ...................... 390
Air conditioning refrigerant .......... 390
Brake fluid .................................... 390
Premium unleaded gasoline ......... 391
Fuel requirements ........................ 391
Gasoline additives ........................ 391
Coolants....................................... 392
Windshield washer system and
headlamp cleaning system* ......... 394
Consumer information ....................... 395
Uniform tire quality grading ......... 395
Technical terms............................... 397Index................................................. 403

283 Operation
Engine compartment
Engine oil
The amount of oil your engine needs will
depend on a number of factors, including
driving style. Higher oil consumption can
occur when

the vehicle is new


the vehicle is driven frequently at high-
er engine speeds
Engine oil consumption checks should only
be made after the vehicle break-in period.Checking engine oil level with the con-
trol system
When checking the oil level the vehicle
must


be parked on level ground


be at normal operating temperature


have been stationary for at least five
minutes with the engine turned off
To check the engine oil level via the
multifunction display, do the following:

Turn the SmartKey in the starter switch
to position2 or press the
KEYLESS GO* start/stop button twice.The standard display (
page 129) should
appear in the multifunction display.

Press buttonk or j on the
steering wheel until the following
message is seen in the multifunction
display:Engine oil level
Measuring now!
Measurement
correct
only if veh. levelOne of the following messages will
subsequently appear in the indicator:

Engine oil level
ok


Add 1.0 qt.
to reach max. oil level!(Canada:
1.0 liter
)
iDo not use any special lubricant addi-
tives, as these may damage the drive
assemblies. Using special additives not
approved by Mercedes-Benz will
restrict your warranty entitlement.
More information on this subject is
available at any Mercedes-Benz
Center.


390 Technical dataFuels, coolants, lubricants, etc.Engine oils
Engine oils are specifically tested for their
suitability in our engines. Therefore, only
use engine oils approved by
Mercedes-Benz. Information on approved
engine oils is available in the Factory Ap-
proved Service Products pamphlet, or at
your authorized Mercedes-Benz Center.Please follow FSS recommendations for
scheduled oil changes. Failure to do so
could result in engine damage not covered
by the Mercedes-Benz Limited Warranty.
Engine oil additives
Do not blend oil additives with engine oil.
They may damage the engine.
Damage or malfunctions resulting from
blending oil additives are not covered by
the Mercedes-Benz Limited Warranty.Air conditioning refrigerant
R-134a (HFC) refrigerant and special PAG
lubricating oil are used in the air condition-
ing system.Never use R-12 (CFC) or mineral-based lu-
bricating oil. Otherwise damage to the
system will occur.
Brake fluid
During vehicle operation, the boiling point
of the brake fluid is continuously reduced
through the absorption of moisture from
the atmosphere. Under extremely strenu-
ous operating conditions, this moisture
content can lead to the formation of bub-
bles in the system, thus reducing the sys-
tem’s efficiency.
Therefore, the brake fluid must be re-
placed every two years, preferably in the
spring.
Only brake fluid approved by
Mercedes-Benz is recommended. Your au-
thorized Mercedes-Benz Center will pro-
vide you with additional information.
!Always check the oil filler cap
(page 285) for important information
pertaining to the engine oil needing to
meet a specific Mercedes-Benz specifi-
cation (e.g. MB 229.5). If such informa-
tion is printed on the oil filler cap, only
use an engine oil from the list of ap-
proved engine oils in the Factory Ap-
proved Service Products pamphlet that
meets the specification indicated on
the oil filler cap.
Using engine oils of other specification
may cause the FSS to incorrectly deter-
mine the next service interval and will
result in engine damage not covered by
the Mercedes-Benz Limited Warranty.

391 Technical data
Fuels, coolants, lubricants, etc.
Premium unleaded gasoline
Fuel requirements
Only use premium unleaded gasoline
meeting ASTM standard D 439:

The octane number (posted at the
p um p) m us t be 91 mi n. It i s an a vera ge
of both the Research (R) octane num-
ber and the Motor (M) octane number:
(R+M) / 2). This is also known as the
ANTI-KNOCK INDEX.
Unleaded gasoline containing oxygenates
such as ethanol, IPA, IBA and TBA can be
used provided the ratio of any one of these
oxygenates to gasoline does not
exceed 10%; MTBE not to exceed 15%.
The ratio of methanol to gasoline must not
exceed 3% plus additional cosolvents.
Using mixtures of ethanol and methanol is
not allowed. Gasohol, which contains 10%
ethanol and 90% unleaded gasoline, can be
used.
These blends must also meet all other fuel
requirements, such as resistance to spark
knock, boiling range, vapor pressure, etc.
Gasoline additives
A major concern among engine manufac-
turers is carbon build-up caused by gaso-
line. Mercedes-Benz recommends only the
use of quality gasoline containing additives
that prevent the build-up of carbon depos-
its.
After an extended period of using fuels
without such additives, carbon deposits
can build up especially on the intake valves
and in the combustion area, leading to en-
gine performance problems such as:

Warm-up hesitation


Unstable idle


Knocking/pinging


Misfire


Power loss
Do not blend any specific fuel additives
with fuel. This only results in unnecessary
cost and may be harmful to the engine
operation.
!To maintain the engine’s durability and
performance, premium unleaded gaso-
l i n e m u s t b e u s e d . I f p r e m i u m u n l e a d e d
is not available and low octane fuel is
used, follow these precautions:

Have the fuel tank only partially
filled with unleaded regular and fill
up with premium unleaded as soon
as possible.


Avoid full throttle driving and abrupt
acceleration.


Do not exceed an engine speed
of 3 000 rpm if the vehicle is loaded
with a light load such as two per-
sons and no luggage.


Do not exceed
2⁄3 of maximum ac-
celerator pedal position if the vehi-
cle is fully loaded or operating in
mountainous terrain.

392 Technical dataFuels, coolants, lubricants, etc.Damage or malfunctions resulting from
poor fuel quality or from blending specific
fuel additives are not covered by the
Mercedes-Benz Limited Warranty.Coolants
The engine coolant is a mixture of water
and anticorrosion / antifreeze, which
provides:

Corrosion protection


Freeze protection


Boiling protection (by increasing the
boiling point)
The cooling system was filled at the factory
with a coolant providing freeze protection
to approximately -22°F (-30°C) and corro-
sion protection.If the antifreeze mixture is effective
to -22°F (-30°C), the boiling point of the
coolant in the pressurized cooling system
is reached at approximately 266°F
(130°C).
The coolant solution must be used year
round to provide the necessary corrosion
protection and increase boil-over protec-
tion. Refer to Service Booklet for replace-
ment interval.
Coolant system design and coolant used
stipulate the replacement interval. The
replacement interval published in the
Service Booklet is only applicable if
MB 325.0 anticorrosion/antifreeze solu-
tion or other Mercedes-Benz approved
products of equal specification (see Facto-
ry Approved Service Products pamphlet)
are used to renew the coolant concentra-
tion or bring it back up to the proper level.To provide important corrosion protection,
the solution must be at least 45% anticor-
rosion/antifreeze (equivalent to freeze
protection to approx. -22°F [-30°C]). If you
use a solution that is more than 55% anti-
corrosion/antifreeze (freeze protection to
approx. -49°F [-45°C]), the engine temper-
ature will increase due to the lower heat
transfer capability of the solution. There-
fore, do not use more than this amount of
anticorrosion/antifreeze.
If the coolant level is low, water and MB
Anticorrosion /Antifreeze should be used
to bring it up to the proper level (have cool-
ing system checked for signs of leakage).
Please make sure the mixture is in accor-
dance with label instructions.
The water in the cooling system must meet
minimum requirements, which are usually
satisfied by normal drinking water. If you
are not sure about the water quality, con-
sult your authorized Mercedes-Benz
Center.

412 IndexE
Easy-entry/exit feature 107
Activating 150
Interrupting movement 150
Electrical fuses 372
Electrical system
Technical data 385
Electronic Stability Program see ESP
Emergency call system* 251
Emergency calls
Initiating an emergency call 254
Telephone* 208
With Tele Aid 252
Emergency operation
(Limp Home Mode) 165
Emergency operations
Closing sliding/pop-up roof* 348
Locking the vehicle 344
Opening sliding/pop-up roof* 348
Remote door unlock 258
Unlocking the vehicle 343
Emergency tensioning device see ETD
Emission control 276
Emission control label 378Ending
A call (telephone) 155
Engine
Compartment 281
Message in display 308
Starting 44
Starting with KEYLESS-GO* 44
Starting with the SmartKey 44
Technical data 380
Turning off 53
Engine cleaning 300
Engine compartment 281
Fuse box in 373
Hood 281
Engine malfunction
indicator lamp 23, 308
Engine number 399Engine oil 283, 390
Adding 285
Additives 390
Checking level 283
Consumption 283
Filler cap 285
Filler neck 285
Message in display 326
Messages in display 284
Viscosity 399
Engine oil level see Oil level
ESP 23, 78, 399
Messages in display 318
Switching off 79
Switching on 80
Warning lamp 310, 311
ETD 399
Safety guidelines 62
ETD (Emergency tensioning device) 67
Exterior lamp switch 119
Exterior rear view mirrors
Adjusting 39
Parking position for 151

429 Index
Switching on
Audio system 186
Automatic central locking
(control system) 149
ESP 80
Front fog lamps 122
Front lamps 119
Hazard warning flasher 123
Headlamps 47
High beams 123
Parking lamps 119
Rapid seat heating*
with seat ventilation* 115
Rapid seat heating*
without seat ventilation* 114
Rear fog lamp 122
Seat heating*
with seat ventilation* 115
Seat heating*
without seat ventilation* 114
Trunk lid opening limiter*
(control system) 149
Windshield wipers 48Symbol (Distronic*)
Distance warning function* 137
Synchronizing
Power windows 213
Sliding/pop-up roof 349
Sliding/pop-up roof* 217T
Tachometer 23, 128
Overspeed range 128
Tail lamps
Cleaning 300
Replacing bulbs 351, 356
Tar stains 299
Technical data 390
Brake fluid 390
Coolant 388
Coolants 392
Electrical system 385
Engine 380
Engine oil 390
Engine oil additives 390
Fuel requirements 391
Fuels 388
Gasoline additives 391
Lubricants 388
Main dimensions 386
Premium unleaded gasoline 391
Rims and tires 381
Weights 387
Windshield and headlamp
washer* system 389, 394