2004 MERCEDES-BENZ CLK320 CABRIOLET service indicator

302 OperationMaintenance
MaintenanceWe strongly recommend that you have
your vehicle serviced by your authorized
Mercedes-Benz Center, in accordance with
the Service Booklet at the times called for
by the FSS (Flexible Service System).
Failure to have the vehicle maintained in
accordance with the Service Booklet at the
designated times /mileage called for by
the FSS may result in vehicle damage not
covered by the Mercedes-Benz Limited
Warranty.
FSS will notify you when your next service
is due.
Approximately one month before your next
service is due, one of the following mes-
sages will appear in the multifunction dis-
play while you are driving or when you
switch on the ignition (example service A):Service A in XXXXX miles (km)
Service A in XXX days
Service A in X day
Service A due now!
The type of service due is indicated in the
multifunction display:9
Minor service (A)
´
Major service (B)
Clearing the service indicator
The service indicator is automatically
cleared after 30 seconds. You can also
clear it yourself.
Press the reset button on the instru-
ment cluster (
page 126).
Service term exceeded
If you have exceeded the suggested ser-
vice term, you will see the following mes-
sage in the multifunction display:Service A exceeded by XXXXX miles
(km)
Service A exceeded by XXX days
Service A exceeded by X dayThe Mercedes-Benz Center will reset the
service indicator following a completed
service.
iThe interval between services depends
on your driving habits. A gentle driving
style, moderate engine speeds and the
avoidance of short-distance trips will
lengthen the interval between services.

303 Operation
Maintenance
Calling up the service indicator
Switch on ignition.
The standard display of the control sys-
tem appears (
page 129).

Press button k or j on the mul-
tifunction steering wheel until FSS indi-
cator with the service symbol 9 or
´ and the service deadline appears
in the multifunction display.
Resetting the service indicator
In the event that the service on your vehi-
cle is not carried out by an authorized
Mercedes-Benz Center, you can reset the
service indicator yourself.
Switch on ignition.
The standard display of the control sys-
tem appears (
page 129).

Press button k or j on the mul-
tifunction steering wheel until the FSS
indicator with the service symbol 9
or ´ and the service deadline ap-
pears in the multifunction display.

Press reset button to the left in the in-
strument cluster for about three sec-
onds.
This message appears in the multifunc-
tion display:Service interval...
To reset:
Press reset button
for 3 seconds

To confirm, press reset button until you
hear a signal.
The service indicator now displays the
reset interval.
iIf the battery is disconnected, the days
of disconnection will not be included in
the count shown by the service indica-
tor. To arrive at the true service dead-
line, you will need to subtract these
days from the days shown in the ser-
vice indicator.
Do not confuse the service indicator
with the engine oil level indicator :.
iIf the service indicator was inadvertent-
ly reset, have a Mercedes-Benz Center
correct it.
Only reset if the proper service has
been performed. Resetting the system
without performing proper service as
called for by the FSS will cause the FSS
to incorrectly determine the next ser-
vice interval which will result in engine
damage not covered by the
Mercedes-Benz Limited Warranty.

314 Practical hintsWhat to do if …?Problem
Possible cause
Suggested solution
?
The yellow “CHECK ENGINE”
malfunction indicator lamp
comes on while driving.
There is a malfunction in:

The fuel management system


The ignition system


The emission control system


Systems which impact emissions
Such malfunctions may result in excessive
emissions values and may switch the engine
to its Limp-Home Mode (emergency opera-
tion).

Have the vehicle checked as soon as
possible by an authorized
Mercedes-Benz Center.
An on-board diagnostic connector is
used by the service station to link the
vehicle to the shop diagnostics system.
It allows the accurate identification of
system malfunctions through the read-
out of diagnostic trouble codes. It is lo-
cated in the front left area of the
footwell next to the parking brake pedal.
The fuel cap is not closed tightly.

Check the fuel cap.
Your gas tank is empty.

After refuelling, start the engine three or
four times in succession.
The Limp-Home mode is canceled. You do
not need to have your vehicle checked.

420 Technical termsCAC
(C
ustomer A
ssistance C
enter)
Mercedes-Benz customer service cen-
ter, which can help you with any ques-
tions about your vehicle and provide
assistance in the event of a break-
down.
CAN system
(C
ontroller A
rea N
etwork)
Data bus network serving to control ve-
hicle functions such as door locking or
windshield wiping.
Cockpit
All instruments, switches, buttons and
indicator/warning lamps in the passen-
ger compartment needed for vehicle
operation and monitoring.COMAND
(C
ockpit M
anagement and D
ata Sys-
tem)
Information and operating center for
vehicle sound and communications
systems, including the radio and the
navigation system, as well as other op-
tional equipment (CD changer, tele-
phone, etc.).
Control system
The control system is used to call up
vehicle information and to change
component settings. Information and
messages appear in the multifunction
display. The driver uses the buttons on
the multifunction steering wheel to
navigate through the system and to ad-
just settings.
Cruise control
Driving convenience system for auto-
matically maintaining the vehicle speed
set by the driver.Distronic*
A driving convenience cruise control
system which helps the driver maintain
a pre-selected speed:


If there is no vehicle directly ahead,
the system operates in the same
way as conventional ->cruise con-
trol.


If a slower moving vehicle is ahead,
Distronic will reduce your vehicle
speed to the extent permitted by re-
duced throttle and up to 20% brak-
ing power to maintain the preset
minimum following distance.

421 Technical terms
Engine number
The number set by the manufacturer
and placed on the cylinder block to
uniquely identify each engine pro-
duced.
Engine oil viscosity
Measurement for the inner friction (vis-
cosity) of the oil at different tempera-
tures. The higher the temperature an
oil can tolerate without becoming thin,
or the lower the temperature it can tol-
erate without becoming viscous, the
better the viscosity.
ESP
(E
lectronic S
tability Pr
ogram)
Improves vehicle handling and direc-
tional stability.
ETD
(E
mergency T
ensioning D
evice)
Device which deploys in certain frontal
and rear collisions exceeding the sys-
tem's threshold to tighten the seat
belts.
->SRSFSS
(F
lexible S
ervice S
ystem)
Service indicator in the multifunction
display that informs the driver when
the next vehicle maintenance service is
due.
Gear range
Number of gears which are available to
the automatic transmission for shifting.
The automatic gear shifting process
can be adapted to specific operating
conditions using the gear selector le-
ver.
GPS
(G
lobal P
ositioning S
ystem)
Satellite-based system for relaying
geographic location information to and
from vehicles equipped with special re-
ceivers. Employs CD digital maps for
navigation.Head-thorax airbag
Installed in the driver and the front pas-
senger seat, these airbags protect oc-
cupants during side impact collisions
exceeding a preset threshold. Unlike
normal side airbags, head-thorax air-
bags are also designed to provide pro-
tection for the head area.
Instrument cluster
The displays and indicator/warning
lamps in the driver’s field of vision, in-
cluding the tachometer, speedometer,
engine temperature and fuel gauge.
KEYLESS-GO*
System for entering and operating the
vehicle without the use of a SmartKey.
Kickdown
Depressing the accelerator past the
point of resistance shifts the transmis-
sion down to the lowest possible gear.
This very quickly accelerates the vehi-
cle and should not be used for normal
acceleration needs.

430 IndexBi-Xenon headlamps* 419
Block heater* 301
Blocking
Rear window operation 74
Bolts
For Minispare wheel 347
Brake assist system (BAS) 419
Brake fluid 412
Message in display 327
Brake lamp bulbs 373
Brake lamp, high mounted 373
Brake pads
Message in display 327
Brakes 274
Warning lamp 313
Break-in period 272Bulbs, replacing 372
Additional turn signals 373
Backup lamps 373
Brake lamps 373
Fog lamps 373
Front lamps 373
High beam (Bi-Xenon*) 373
High beam (Halogen) 373
High beam flasher (Bi-Xenon*) 373
High beam flasher (Halogen) 373
High mounted brake lamp 373
License plate lamps 373, 378
Low beam (Bi-Xenon*) 373
Low beam (Halogen) 373
Parking lamps 373, 375, 377
Rear fog lamp 373, 378
Side marker lamps 373, 377
Standing lamps 373, 375, 377
Tail lamp assemblies 373, 378
Turn signal lamps 373
Button
Audio system 186C
CAC (Customer Assistance Center) 420
Calling up
Distronic* settings 137
Range (distance to empty) 153
Service indicator 303
CAN system 420
Canceling
Cruise control 227
Capacities
Fuels, coolants, lubricants, etc. 410
Cassette operation
Playing cassettes 196
Cassette player
Operating 136
Catalytic converter 281
CD changer* 199
CD operation 199
CD player
Operating 136
Center console 25
Lower part 26
PASS. AIRBAG OFF
indicator lamp 319
Upper part 25

434 Index
Residual heat 182
Seat ventilation* 113
Steering wheel gearshift control
(CLK 55 AMG) 165
Tow-away alarm 85
Deceleration
With Distronic* 232
Deep water see Standing water
Defogging
Windshield 176
Defrosting 177
Delayed switch-off
Interior lighting 148
Dialing
A number (telephone) 155
Difficulties
While driving see
Problems while driving
With starting 45
Digital speedometer 134
Direction of rotation (tires) 297
Discharged battery
Jump starting 388
Disconnecting
Vehicle battery 386Display
Selecting 143, 144
Display elements
Audio system 184
Displays
Digital speedometer 134
Distronic* 231
Messages 290, 320
Selecting 143
Service indicator 302
Showing malfunctions 138
Distance
Decreasing in Distronic* 237
Increasing in Distronic* 237
Setting in Distronic* 236
Warning function 237
Distance to empty (range)
Calling up 152
Distance warning function* 237
Activating 238
Deactivating 238
Distance warning lamp 237
Intermittent warning sound 237
Symbol in multifunction display 137Distronic* 229, 420
Activated 233
Activating 234
Calling up settings 137, 232
Cleaning system sensor 308
Cruise control lever 233
Deactivated 233
Deactivating 236
Deceleration 232
Decreasing distance 237
Decreasing time interval 236
Displays in the speedometer dial 231
Distance warning function 237
Distance warning lamp 316
Driving hints 238
Fine adjustment 235
Increasing distance 237
Increasing time interval 236
Intermittent signal tone 231
Menu 232
Messages in display 323
Sensor cover 308
Setting a higher speed 234
Setting a lower speed 235
Setting following distance 236

436 IndexEmission control 282
Emission control label 400
Ending
A call (telephone*) 155
Engine
Compartment 287
Message in display 314
Starting 44
Starting with KEYLESS-GO* 44
Starting with the SmartKey 44
Technical data 402
Turning off 54
Engine cleaning 306
Engine compartment 287
Fuse box in 395
Hood 287
Engine malfunction
indicator lamp 23, 314
Engine number 421Engine oil 288, 412
Adding 291
Additives 412
Checking level 289
Consumption 288
Filler cap 291
Filler neck 291
Message in display 332
Messages in display 290
Viscosity 421
Engine oil level see Oil level
ESP 23, 79, 421
Messages in display 324
Switching off 80
Switching on 81
Warning lamp 316, 317
ETD 421
Safety guidelines 62
ETD (Emergency tensioning device) 67
Exterior lamp switch 119
Exterior rear view mirrors
Adjusting 39
Parking position for 151F
Fahrenheit
Setting temperature units 142
Fastening the seat belts 40
Fine adjustment
Cruise control 228
Distronic* 235
First aid kit 343
Flat tire 380
Lowering the vehicle 384
Minispare wheel 346
Mounting the Minispare wheel 380
Preparing the vehicle 380
Flexible Service System (FSS) 302, 421
Floormates*
Installing 255
Removing 255
Floormats* 255
Fog lamp, rear 122, 373
Fog lamps
Replacing bulbs 373
Fog lamps, front
Messages in display 335
Replacing bulbs 374
Switching on 122