2004 MERCEDES-BENZ CLK COUPE keyless

89
Controls in detail
Opening and closing
You can lock or unlock the vehicle centrally
from the inside using the central locking
switches. This may be useful if you wish to
unlock the passenger door from the ins ide
or lock the vehicle before pulling away, for
example.
i Youcan open a door from the inside at any
time, ev enif it has bee nlocked.
i It is not possible to unlock the vehicle cen-
trall yfro mt he inside if it was previous lylocked
fro mthe outside using the key or KEYLESS GO*.
In this ca se, you can only lock the vehicle cen-
tral lyif both doors are closed. The central
locking sw itch is located on the
upper section of the centre console.
Central locking switch
1 To lock
2 To unlock Locking
6
Press the upper section of central lock-
ing switch 1.
The vehicle is centrally locked. Un
locking
6 Press the lower section of central lock-
ing switch 2.
The vehicle is centrally unlocked.
i It is not possi ble to unlock the vehicle from
the inside if ithas bee ncentrally locked from the
outside. Locking and
unlocking from the
inside G
Risk of accident Never leave
children alone in the vehicle.
The y could open adoor from the inside,
even if it is locked, and there byendanger
themselves and others. 209en_d2.boo Seite
89Diens tag, 25 .Mai 2004 7:26 19

97
Controls in detail
Storing settings* (memory package)
You can store up to three different settings
for each key using the memory function.
With KEYLESS GO*, it is possib leto store a
furthe r three settings for both KEYLESS
GO keys* together. Thes ethree settings
are activated for each KEYLESS GO key* if
you operate the vehicle us ing KE YLESS
GO*.
The following settings are stored:
! Seat, backrest and head restraint
pos ition
! Driver's side: steering wheel position
! Driver's side: exterior mirror position
i Each additional key has the same settings as
KE YLESS GO*. You can deactivate key-dependent set-
tings using the operating system
(=
pag e130).
The memory button and storage position
sw itch are located in the door control
panel.
1 Mmemory button
2 Storage positions 1, 2, 3 6
Make sure that:
! the ignition is switched on
or ! the respective door is open
6 Adjust the seat.
6 On the driver's side, also adjust the
steering wheel and the mirrors
(=
page 25).
6 Turn storage position switch 2to the
required memory position 1, 2or3.
6 Pres s the Mmemory button.
6 Pres s the storage position switch
wi thin three seconds.
The settings are stored in this storage
position. Storing settings* (memory package)
G
Risk of accident Only
call up the memory functions onthe
driver's side when the vehicle is stationary.
You could otherwise be distracted inthe
event of an unexpected steering wheel and
seat move ment. P
54.25-2600-31 neu Storing209en_d2.boo Seite
97Diens tag, 25 .Mai 2004 7:26 19

99
Controls in detail
Storing settings* (memory package)
6 Press button 2to adjust the exterior
mirror in such a way that you can see
the rear wheel and the kerb.
6 Press the Mmemory button in the
door.
6 Then press adjustment button 2up or
down and to the left or right within
three seconds.
The parking position is stored if the
mirror does not move.
i Ifth e mirror doe smove, repeat the step s.
Yo u ca n move the mirror again after storing the
setting. The exterior mirror returns to
its original
position:
! approximately 10 seconds after a for-
ward gear isengaged
! approximately 10 seconds after you
move the selector lever to position D
! ifyou exceed a speed of approximately
10 km /hregardless of the gear
engaged
! ifyou press the button for the exterior
mirror on the driver's side
You can activate and deactivate this func-
tion using the operating system
( = page 130).
You can store one parking position per key
and one parking position for the two
KEYLESS GO keys*. 209en_d2.boo Seite
99Diens tag, 25 .Mai 2004 7:26 19

178 Controls in detail
Open-air
You can open and close the side windows
electrically.
iFrom the outside it is also possible to:
! open the side windows usingth e summer
opening feature ( =page 183)
! closethe side windows using the conve n-
ience closing feature (
=page 184)
From th edriver' sse at you can disable operation
of the rear side windows ( =page 67). Open-air
Opening
and closing the windows G
Risk of inju ry Make sure that nobody can become trapped
between the side window and the door frame
as you open the side windows. Do not touch
or lean against the side window during the
opening procedure, ot
herwise you could be
caught between the side window and the door
fr am e by the downwards movem ent of the
side window. If there is a risk of entrapment,
release or press the switch to close the win-
dow. G
Risk of injury Make sure that nobody can become tr
apped
as you close a side window .If there is a risk of
entrapment, releas ethe switch to reopen the
side window. G
Risk of injury Your vehicle can be started using a valid
KEY
LESS GO key. For this reason, children
should never beleft unsupervised in the
vehicle. Always take the KEYLESS GO key
with you, even if you are only leaving the
ve hicle for a short time.
Do not leave children unsupervised in the
vehicle even if they are secured in a child
restraint syst em. The childre ncould:
! injure them selves on parts of the vehicle
! be serious lyor ev enfatally harmed by
prolonged exp osure to heat
! pres sthe central loc king switch,thereby
releasing the child-proof locks, and then
open the doors.
If the children open a door:
! they could cause injury to others
! they could get out of th evehicle, injuring
thems elves as they do so or they could
be injured by passing vehicles Ac
tivate the child-proof locks in the rear and
disable rear operation of the windows
(= page 67) if children are travelling
in the
vehicle. Children could otherwise open a
door or window while the vehicle is in
mo tion, adjus tthe steering wheel manually
or electrically and ther eby injure themselves
or others. 209en_d2.boo Seite
178 Dienstag, 25. Mai 2004 7:26 19

280 Practical advice
Display
messages
The operating system shows warnings or
malfunct ions in the multi-function display.
Certain messages are accompanied by an
audible warning signal or a continuous
tone.
High-priority messages are highlighted in
red in the display. These messages are
printed inred in the following tables.
Please respond inaccordance with the
messages and follow the additional notes
in this Owner's Manual.
! You can acknowledge low-priority mes-
sages by pressing the è,· ,
j ork buttons on the multi-
fun ction steering wheel or the reset
button on the left in the instrument
cluster. They will then be stored in the
malfunction memor y.
! Highest-priority messages cannot be
acknow ledged and are automatically
stored in the malfunction memory. If you select
the malfunction memory
menu in the operating system, the ac-
knowledged and unacknowledged mes-
sages will appear ( =page 116).
! Malfunctions and faults are only indicated
and dis play ed bycertain systems. The messages
se rve merelyto make sure that the vehicle oper-
ates safel y. i
Turning the key to position 2in the ignition
lock or pressing the KEYLESS GO* button twice
activates all the warni ngand indicator lamps
(except for the turn signal indicator lamps) and
the multi-function display. Please check that
the yare working properly before commencing a
journey.
The following tables show all the display
messages. The messages are divided into
sections to make it easier to find the rele-
va nt message:
! Text-style messages from
(=
page 281) onwards are displayed
alphabetically
! Symbol messages from ( =pa ge 293)
onwards Display messages
G
Riskofaccident No
messages are displayed if the instrument
clu ster or multi-function display fails. Other
systems which significantly affect the vehi-
cle's han dling characteristics may have
failed.
Contact a qualified spec ialist workshop im-
me diate lywhich hast he nece ssary special-
ist knowledge and tools to carry out the
work requi red. Mercedes-Benz recommends
that you use a Mercedes-Benz Service Cen-
tre for this purpose. In parti cular, work rele-
va nt to safety or onsafety-relate dsystems
must be carried out at a quali fied specialist
wor kshop. 209en_d2.boo Seite
280 Dienstag, 25. Mai 2004 7:26 19

292 Practical advice
Display
messages Display messages Pos
sible cause /consequence Possible solution
PSelector
lever
in park position !
You have swi tched off the en-
gine using the KEYLESS GObut-
ton* with the selector lever in
position Nand opened the driv-
er's door.
or
! You have tried to switch off the
engine using the KEYLESS GO
button* with the selector lever
in position Ror D. 6
Move the selector le ver to P.
Selector leverin
position Por N Yo
u have tried to sta rtthe engine
with the selector le ver in position R
or D. 6
Move the selector lever to Por N. Sp
eed-
tronic/
cruise
control
Visit work shop! Speedtronic, cruise control or
Distronic* is faulty. 6
Have Speedtronic, cruise control or
Distronic* checked at a qualified specialist
workshop, e.g. a Mercedes-Benz Servi ce
Centre. SRS
Restraint
system
defective
Visit work shop! The restraint systems have mal-
functioned. 6
Visit a qualified specialist workshop imme-
diately, e.g. a Mercedes-Benz Service Cen-
tre. 209en_d2.boo Seite
292 Dienstag, 25. Mai 2004 7:26 19

305
Practical advice
Display messag esDisplay messages Possible cause
/consequ ence Possible sol
ution HTyre
pressu remonitor
not available! The tyre pressure loss warning fea-
ture has
been deactivat eddue toa
fault. 6
Have the tyre pressure loss warning*
checked at a qualified specialist workshop,
e.g. a Mercedes-Benz Servi ceCentre. F
Key
Check battery! The KEYLESS GO key* batteries are
discharged. 6
Chang ethe batteries ( =pa ge 354). F
Key
not detected! The KEYLESS GO key* is
not detect-
ed while the engine is running be-
cause:
! the key is not inside the vehicle
! there is strong interference
from a radio source 6
Stopyour vehicle as soon as itis safe to do
so.
6 Look for the key.
Switchi ngoff the engine prevents you from
locking the vehicle centrally or starting the
engine.
Operate the vehicl eusing the key function. F
Key
not detected! The KEYLESS GO key* is currently
not detected. 6
Alterthe position of the key in the vehicle.
6 Insert the key into the ignition lock and op-
erate the vehicle using the ignition lock. 209en_d2.boo Seite
305 Dienstag, 25. Mai 2004 7:26 19

306 Practical advice
Display
messages Display messages Pos
sible cause /consequence Possible solution
FKey
still in
vehicle! The key has been detected in the
vehicle during locking. 6
Remove the key from the vehicle.
Key
Visit work shop! There is a fault with the KEYLESS
GO system*. 6
Visit a qualif ied specialist workshop, e.g. a
Mercedes-Benz Service Centre.
Replace key The key
isno longer working. 6
Visit a qualif ied specialist workshop, e.g. a
Mercedes-Benz Service Centre. A
Reserve fu
el The fuel level has fallen
into the re-
serve range. 6
Refuel at the nearest filling station
( = page 241). J
Doors open! Yo
u are trying to pull away but at
least one of the doors is open. 6
Close the doors. #
Undervolta
ge
Charge battery The vehicle battery has insufficient
voltage. 6
Start the engine. #
Undervolta
ge
Switch off
consumers The vehicle battery has insufficient
voltage. 6
Switch off any consumers that are not re-
quired. 209en_d2.boo Seite
306 Dienstag, 25. Mai 2004 7:26 19