51 Getting started
Driving
Single wipe
Press switch briefly in the direction of
arrow1.
The windshield wipers wipe one time
without washer fluid.
Wiping with windshield washer fluid
Press switch in the direction of
arrow1 past the resistance point.
The windshield wiper operates with
washer fluid.
For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system”
(
page 269)
!If anything blocks the windshield wip-
ers (leaves, snow, etc.), switch them off
immediately.
For safety reasons,
turn off the engine by turning
the SmartKey to position0 and
withdraw SmartKey from starter
switch
or
turn off the engine by pressing
the KEYLESS-GO* start/stop
button and open the driver’s
door (with the driver’s door
open, starter switch is in
position0, same as with
SmartKey removed from starter
switch)
before attempting to remove any
blockage.
Remove blockage.
Turn the windshield wipers on
again.
If windshield wipers fail to function at
all in switch positionI,
set the combination switch to the
next highest wiper speed
have the windshield wipers
checked at the nearest authorized
Mercedes-Benz Center
413 Index
Wheel change
Tightening torque 347
Wheels
Rotating 279
Tires and wheels 270
Window curtain airbags 65
Windows see Side windows
Windshield
Refilling washer fluid 269
Replacing wiper blades 341
Washer fluid 269, 379
Windshield washer 258
Windshield washer fluid
Message in display 319
Refilling 269, 379
Wiping with 51
Windshield wipers 50, 170
Fast wiper speed 50
Intermittent wiping 50
Replacing wiper blades 341
Single wipe 51
Switching on 50
Wiping with windshield washer
fluid 51Winter driving 280
Block heater (Canada only) 281
Snow chains 281
Tires 280
Transmission program mode 163,
164
Winter driving instructions 252
Winter tires 280
Wiper blades
Cleaning 287
Installing 342
Removing 341
Replacing 341
Wiping
And washing simultaneously 51
Interval 50
With windshield washer fluid 51
Wood trims
Cleaning 290X
Xenon headlamps
Bi-Xenon 383
