2004 MERCEDES-BENZ CL500 mirror controls

240 Controls in detailUseful features
Programming or reprogramming the in-
tegrated remote control
Step 1:
Switch on ignition.
Step 2:

If you have previously programmed an
integrated signal transmitter button
and wish to retain its programming,
proceed to step 3. Otherwise, press
and hold the two outer signal transmit-
ter buttons2 and 4 and release
them only when the indicator lamp be-
gins to flash after approximately
20 seconds (do not hold the button for
longer than 30 seconds). This proce-
dure erases any previous settings for
all three channels and initializes the
memory. If you later wish to program a
second and/or third hand-held trans-
mitter to the remaining two signal
transmitter buttons, do not repeat this
step and begin directly with step 3.Step 3:

Hold the end of the hand-held remote
control transmitter6 of the device
you wish to train approximately 2 to
5 in (5 cm to 12 cm) away from the sur-
face of the integrated remote control
located on the interior rear view mirror,
keeping the indicator lamp1 in view.
Step 4:

Using both hands, simultaneously
press the hand-held transmitter
button5 and the desired integrated
signal transmitter button (2, 3
or4). Do not release the buttons until
completing step 5.
The indicator lamp1 on the integrat-
ed remote control will flash, first slowly
and then rapidly.
iFor operation in the USA only:
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:

This device may not cause harmful
interference, and


this device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.

399 Index
Height adjustment
Head restraints 36
Steering wheel 39
Height adjustments
Vehicle level 211
High beam flasher 49, 123
High beam headlamps
Messages in display 315
Replacing bulbs 336
Switching on 123
High mounted brake lamp 337
Hood 260
Closing 261
Message in display 312
Opening 260
Hydroplaning 251
I
Identification labels
Certification label 362
Emission control label 362
Engine number 362
Information label, California version
Vacuum line routing for emission
control system 362VIN (vehicle identification
number) 362
VIN, visible 362
Ignition 31
Immobilizer 82
Activating 82
Deactivating 82
Indicator lamps see Lamps, indicator and
warning
Infant and child restraint systems 69
Installing 73
LATCH child seat mounts 74
Information
About service and warranty 10
Button for Tele Aid 235
Inside rear view mirror
Antiglare 167
Installing
Infant and child restraint systems 73
Wiper blades 342
Instrument cluster 21, 22, 126, 385
Cleaning 289
Coolant temperature gauge 127
Illumination 126Multifunction display 129
Outside temperature indicator 128
Selecting language 149
Instruments and controls see Cockpit 20
Integrated remote control
Canadian programming 242
Erasing memory 243
Hand-held transmitter 240
Operating 243
Rolling code programming 241
Interior illumination
Delayed switch-off 152
Interior lighting 124
Activating automatic control 124
Deactivating automatic control 125
Manual operation 125
Interior rear view mirror
Adjusting 40
J
Jump starting 351

405 Index
Q
Quick search
Phone book* 140
R
Radio
Selecting satellite radio*
stations 135
Selecting stations 135
Radio transmitters, control and
operation 254
Range (distance to empty)
Calling up 144
Reading lamp 27
Rear fog lamp 337
Bulb 337
Switching on 122
Rear lamp bulbs
Replacing 340
Rear lamps see Tail lamps
Rear passenger compartment
Adjustable air vents 185
Rear seat head restraints
Folding back with switch 109
Placing upright 109Rear seats
Head restraints 109
Rear view mirror automatic antiglare 167
Rear view mirrors see Mirrors
Rear window
Blocking operation 75
Rear window defroster 182
Activating 182
Deactivating 182
Rear window sunshade* 172
Reconnecting
Vehicle battery 350
Refueling 257
Regular checks 258
Regular driving style 210
Reinstalling vehicle battery 349
Remote controls
Integrated 240
SmartKey 88, 92
Remote door unlock
With Tele Aid 237
Remote Vehicle Diagnostics 386
Removing
Vehicle battery 349
Wheel 346
Wiper blades 341Replacing
Backup lamp bulbs 340
Brake lamp bulbs 340
Bulbs 336
Front lamp bulbs 338
License plate lamp bulbs 340
Parking lamp bulbs 339
Rear fog lamp bulbs 340
Rear lamp bulbs 337, 340
Rear turn signal bulbs 340
Side marker lamp bulbs 339
Standing lamp bulbs 339
Wiper blades 341
Reporting
Safety defects 18
Reset button in the instrument
cluster 146
Resetting
All functions (control system) 146
All functions of a submenu 146
Fuel consumption 143
Service indicator (FSS) 283
Stored speed in Distronic* 204
Trip odometer 127
Residual heat utilization 183, 386