2004 MAZDA MODEL B2300 TRUCK oil dipstick

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT
2.3L I4 engine
1. Windshield washer fluid reservoir
2. Engine coolant reservoir
3. Engine oil dipstick
4. Transmission fluid dipstick (automatic transmission)
5. Engine oil filler cap
6. Brake fluid reservoir
7. Power distribution box
8. Clutch fluid reservoir (manual transmission)
9. Battery
10. Power steering fluid reservoir
11. Air filter assembly

3.0L V6 engine
1. Engine coolant reservoir
2. Windshield washer fluid reservoir
3. Engine oil filler cap
4. Transmission fluid dipstick (automatic transmission)
5. Engine oil dipstick
6. Brake fluid reservoir
7. Power distribution box
8. Clutch fluid reservoir (manual transmission)
9. Battery
10. Power steering fluid reservoir
11. Air filter assembly

4.0L SOHC V6 engine
1. Windshield washer fluid reservoir
2. Transmission fluid dipstick (automatic transmission)
3. Engine oil filler cap
4. Engine oil dipstick
5. Brake fluid reservoir
6. Power distribution box
7. Clutch fluid reservoir (manual transmission)
8. Battery
9. Power steering fluid reservoir
10. Air filter assembly
11. Engine coolant reservoir
Maintenance and Specifications
192

ENGINE OIL
Checking the engine oil
Refer to the service maintenance section for the appropriate intervals for
checking the engine oil.
1. Make sure the vehicle is on level ground.
2. Turn the engine off and wait a few minutes for the oil to drain into
the oil pan.
3. Set the parking brake and ensure the gearshift is securely latched in
P (Park) (automatic transmission) or 1 (First) (manual
transmission).
4. Open the hood. Protect yourself from engine heat.
5. Locate and carefully remove the engine oil level indicator (dipstick).
²2.3L I4 engine
MAX MIN
Maintenance and Specifications
194

²4.0L SOHC V6 engine
SAE 5W-30
²Oil levels above the MAX mark may cause engine damage. Some oil
must be removed from the engine by a service technician.
7. Put the indicator back in and ensure it is fully seated.
Adding engine oil
1. Check the engine oil. For instructions, refer toChecking the engine
oilin this chapter.
2. If the engine oil level is not within the normal range, add only
certified engine oil of the recommended viscosity. Remove the engine
oil filler cap and use a funnel to pour the engine oil into the opening.
3. Recheck the engine oil level. Make sure the oil level is not above the
MAX mark or the letter F in FULL on the engine oil level indicator
(dipstick).
4. Install the indicator and ensure it is fully seated.
5. Fully install the engine oil filler cap by turning the filler cap 1/4 turn
until it stops.
To avoid possible oil loss, DO NOT operate the vehicle with the
engine oil level indicator and/or the engine oil filler cap removed.

Cleaning your vehicle
engine compartment ..............175
instrument panel ....................178
interior .....................................178
interior trim ............................178
Mazda car care products .......179
plastic parts ............................177
washing ....................................174
waxing .....................................174
wheels ......................................175
wiper blades ............................177
Clock adjust
AM/FM Stereo ...........................18
AM/FM stereo CD .....................20
AM/FM stereo tape/CD/MP3 ....23
Premium AM/FM stereo
CD6/MP3 ...................................26
Single CD ..................................19
Clutch
fluid ..........................................222
operation while driving ..........117
recommended shift speeds ....118
Compass, electronic ..............46±47
calibration .................................48
set zone adjustment .................47
Console ........................................53
Coolant
checking and adding ..............202
refill capacities ................205, 240
specifications ..................243±244
Cruise control
(see Speed control) ....................49
Customer
Assistance ..................163±164, 167
D
Daytime running lamps
(see Lamps) ................................34Dipstick
engine oil .................................194
Doors
lubricant specifications ..........243
Driveline universal joint and
slip yoke ....................................226
Driving under special
conditions ..................119, 121±122
mud ..........................................122
sand .........................................122
snow and ice ...........................123
through water .................122±123
E
Emergencies, roadside
jump-starting ..........................157
Emergency Flashers .................137
Emission control system ..........217
Engine ........................................245
cleaning ...................................175
coolant .....................................202
idle speed control ...................200
limp to safety cooling .............206
lubrication
specifications ..................243±244
refill capacities ........................240
service points ..................190±192
starting after a collision .........137
Engine block heater .................109
Engine oil ..................................194
checking and adding ..............194
dipstick ....................................194
filter, specifications ................198
recommendations ...................198
refill capacities ........................240
specifications ..................243±244
Exhaust fumes ..........................110
Index
250