2004 MAZDA MODEL 3 5-DOOR stop start

5-40
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Form No. 8S18-EA-03I

Security Indicator Light
This indicator light starts flashing every 2
seconds when the ignition switch is turned
from the ON to the ACC position and the
immobilizer system is armed.
The light stops flashing when the ignition
switch is turned to the ON position with
the correct ignition key.
At this time, the immobilizer system is
disarmed and the light illuminates for
about 3 seconds and then goes out.
If the engine doesn
’t start with the correct
ignition key, and the security indicator
light keeps illuminating or flashing, the
system may have a malfunction. Consult
an Authorized Mazda Dealer.

Headlight High-Beam Indicator
Light
This light indicates one of two things:
• The high-beam headlights are on.
• The turn signal lever is in the flash-to-
pass position.


Shift Position Indicator Light
(Automatic Transaxle)
This indicates the selected shift position
when the ignition switch is in the ON
position.
Gear position indicator
When the shift lever is in the D or M
position, the numeral for the selected gear
illuminates.
Gear position indicator
J48C_8S18-EA-03I_Edition3.book Page 40 Monday, February 9, 2004 8:41 PM
Black process 45.0 ° 240.0 LPI

6-23
Interior Comfort
Au di o S ys t em
Form No. 8S18-EA-03I
Fast-forward/Rewind
Press the fast-forward button ( ) to
fast-forward.
Press the rewind button ( ) to rewind.
To stop this operation and play the
cassette tape, press the button again.
Reversing
Press the program button ( ) to
change cassette tape-play direction.
Automatic program control (APC)
APC is used to find the beginning of
either the next program or the one being
played.
Press the APC button ( ) to the
beginning of the next selection.
Press the APC button ( ) to the
beginning of the one being played. To
stop this operation and play the cassette
tape, press the button again.Repeat play
This operation makes it possible to listen
to a selection repeatedly.
Press the repeat button ( ) during play.
The current selection playing will be
repeated ("RPT" will be displayed).
Press the repeat button ( ) once again
to cancel repeat play.
NOTE
The cassette tape can be ejected when
the ignition switch is in the OFF
position.
NOTE
When the cassette tape ends during
fast-forward or rewind, it
automatically stops and starts playing.
NOTE
When the cassette tape ends, the unit
automatically reverses play.
NOTE
APC may not operate properly if:
•
A tape was recorded at a low level.
• A tape has long, silent intervals.
• A tape is a live recording.
• A tape has very short intervals of
less than 3 seconds.
NOTE
RPT may not operate properly if:
•A tape was recorded at a low level.
• A tape has long, silent intervals.
• A tape is a live recording.
• A tape has very short intervals of
less than 3 seconds.
J48C_8S18-EA-03I_Edition3.book Page 23 Monday, February 9, 2004 8:41 PM
Black process 45.0 ° 240.0 LPI

7-13
In Case of an Emergency
Form No. 8S18-EA-03I
Overheating
If the temperature gauge indicates
overheating, the vehicle loses power, or
you hear a loud knocking or pinging
noise, the engine is probably too hot.If the temperature gauge indicates
overheating:
1. Drive safely to the side of the road and
park off the right-of-way.
2. Put a vehicle with an automatic transaxle in park (P), a manual
transaxle in neutral.
Apply the parking brake.
3. Turn off the air conditioner.
4. Check whether coolant or steam is escaping from under the hood or from
the engine compartment.
If steam is coming from the engine
compartment:
Don ’t go near the front of the vehicle.
Stop the engine.
Wait until the steam dissipates, then
open the hood and start the engine.
If neither coolant nor steam is
escaping:
Open the hood and idle the engine until
it cools.
5. Make sure the cooling fan is operating, then turn off the engine after the
temperature has decreased.
Overheating
Cooling Fan and Engine
Inspection:
Inspecting the engine with the
ignition switch in the ON position is
dangerous. The cooling fan could
turn on unexpectedly even when the
engine isn ’t running. You could be
seriously injured by the fan. Turn the
ignition switch off and remove the key
from the ignition switch when you
inspect the engine.
Cooling System Cap:
When the engine and radiator are
hot, scalding coolant and steam may
shoot out under pressure and cause
serious injury. Don ’t remove the
cooling system cap when the engine
and radiator are hot.
Steam from Overheated Engine:
Steam from an overheated engine is
dangerous. The escaping steam could
seriously burn you. Open the hood
ONLY after steam is no longer
escaping from the engine.
WARNING
If the cooling fan does not operate
while the engine is running, the engine
temperature will increase. Stop the
engine and call an Authorized Mazda
Dealer.
CAUTION
J48C_8S18-EA-03I_Edition3.book Page 13 Monday, February 9, 2004 8:41 PM
Black process 45.0 ° 240.0 LPI

8-21
Maintenance and Care
Owner Maintenance
Form No. 8S18-EA-03I
Fully insert the dipstick. When adding
fluid, inspect with the dipstick to make
sure it doesn’t pass full.

Inspecting Washer Fluid Level• Use the cold scale only as a
reference.
• If outside temperature is lower than
about 20
°C (70
°F), start the engine
and inspect the fluid level after the
engine reaches operating
temperature.
• If the vehicle has been driven for an
extended period at high speeds or in
city traffic in hot weather, inspect
the level only after stopping the
engine and allowing the fluid to
cool for 30 minutes.
NOTE
Inspect the fluid on both sides of the
dipstick in a well lit area for an
accurate reading.
CAUTIONWasher Fluid
Substitute Washer Fluid:
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the
windshield, affect your visibility, and
could result in an accident. Use only
windshield washer fluid or plain
water in the reservoir.
Using Washer Fluid Without Anti-
freeze Protection in Cold Weather:
Operating your vehicle in
temperatures below 4 degrees C (40
degrees F) using washer fluid without
anti-freeze protection is dangerous as
it could cause impaired windshield
vision and result in an accident. In
cold weather, always use washer fluid
with anti-freeze protection.
NOTE
State or local regulations may restrict
the use of volatile organic compounds
(VOCs), which are commonly used as
anti-freeze agents in washer fluid. A
washer fluid with limited VOC content
should be used only if it provides
adequate freeze resistance for all
regions and climates in which the
vehicle will be operated.
WARNING
J48C_8S18-EA-03I_Edition3.book Page 21 Monday, February 9, 2004 8:41 PM
Black process 45.0 ° 240.0 LPI

14
Before U\be
Pop Up Menu
Pop Up menu appear\b when pre\b\O\bing \O.
Thi\b function i\b mainly u\bed during \Oroute \bearche\b.
Route\bchange\b(\b\b\b\b\b\b\b\bpage\a\b26)When route ha\b
been \bet or route
in operation
Route\bd\fsplay\b(\b\b\b\b\b\b\b\bpag\ae\b25)
Route\bl\fst\bd\fsplay
Marked\bpo\fnt\breg\fstrat\a\fon\b(\b\b\b\b\b\b\b\bpage\b28)
Map\bor\fentat\fon\bchange\a\b(\b\b\b\b\b\b\b\bpage\b19)
Rerout\fng
Change\bof\brout\fng\bSear\ach\bmethod\b(\b\b\b\b\b\b\b\bpage\b21)
Change\bvolume
Delete\bDest\fnat\fon\b(\b\b\b\a\b\b\b\b\bpage\b25)
Stop\broute\bSearch\b(\b\b\b\b\b\b\b\a\bpage\b25)
D\frect\bdest\fnat\fon\b\fnp\aut
w\fth\bthe\bjoyst\fck\b(\b\b\b\b\b\b\b\b\apage\b24)
When \bcroll map
i\b di\bplayed
Near\bPOI\b(Po\fnt\bof\bInter\aest)\bsearch\b
(w\fth\fn\ba\brad\fus\bof\babout\a\b6\bm\fle)\b(\b\b\b\b\b\b\b\bpage\b24)

Example\b:\bWhen\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\f\as\bselected. Detour\bsubmenu
H\fghl\fghted
NoteAppears\bonly\bwhen\bthe\a\bauto\breroute
funct\fon\b(\b\b\b\b\b\b\b\bpage\b32)\fs\b\fnact\fvated.
Note
Th\fs\bfunct\fon\b\fs\bnot\bava\f\alable\bon\b\fntersect\fon\bz\aoom\bmaps.
ENTER

Start\bthe\bd
to\bstart\bdur

The\bveh\fcle
depend\fng
\fs\bcalculat\f
The\bmob\fle\bn
properly\bcal\fb
1.\bWhen\bus\fn
2.\bWhen\bthe
3.\bWhen\bthe
wheel\bd\fa
4.\bWhen\bdel
dtko\b
Make\bsure\bt
Dr\fve\bthe\bveh
(12.5\bMPH)\bw
Note\b
Befo
Re\betting

Select

Refer\bto\bpage\b28\bfor\b\fnf\aormat\fon\babout
marked\bpo\fnts.
De\btination by
inter\bection
De\btination
by PO\f
De\btination by
hi\btory
De\btination by
a marked point
De\btination by
the map
20
De\btination by
addre\b\b
Open the [Select
De\btination] MenuSelect
Open the [Select
De\btination] Menu

If\byou\bwould\bl\fke\bto\bgo\a\bback\bto\byour\bstart\bpo\fn\at,\bselect\bthe\b[H\fstory\a]\b\fn\bthe\b[Select
Dest\fnat\fon]\bMenu,\baft\aer\bthat,\bselect\ba\bgree\an\bflag\b\fcon\b\b\b\b\b\b\b\b\bas\ba\bde\ast\fnat\fon.
Dest\fnat\fon\bEntry\band\bR\aoute\bSearch
Default:\bNorth\bCentral\a\bUSA\b\b
Select
To\benter\bthe\bstreet\b
name,\bc\fty\bname,\b
z\fp\bcode,\band\bother.
Character entry(\b\b\b\b\b\b\b\bpage\b22)
Select
Select a
de\btination from
the PO\f categorie\b.

POI\b\fcon\bchart
( page\b23)
Select
Select
Select
Routing
1selectDdrDhDdrDhDdrDhwDd,2ENTER
De\btination by
inter\bection
De\btination
by PO\f
De\btination by
hi\btory
De\btination by
a marked point
De\btination by
the map
3
Enter the nam
the city wher
target inter\be
(The\b20\bclosest\bdpos\ft\fon\bappear
Select a de\bt
Select a de\b(Up to 100 p
Enter the
Zipcode.*2
Enter/Seleccity name.*
Enter/Selec\btreet name
Enter the ta
Enter the ta
city name.

Do\bnDo n
v\fewsyststop
Routhat\b
Warning\b
Move the cr
cur\bor to th
(Up\bto\b50\bpo\fnts
*1\bThe\bmemory\bstore*2\bDepend\fng\bon\bth
ENTER

nformat\fon\babout
[Selecton.
earch
ENTERER
21
3
Character\bentry\bor\bse\alect\fon
(\b\b\b\b\b\b\b\bpage\b22)
Search method
4
Select the
hou\be
number
.
Enter the name of
the city where your
target inter\bection i\b.
Enter the
name of a
\btreet that i\b
part of the
inter\bection.Enter the
other \btreet
name that
make\b up the
inter\bection.
Th\fs\b\fs\bthe\broute\bthat
reaches\bthe\bdest\fnat\fo\an
\fn\bthe\bshortest\bt\fme.\a
(The\b20\bclosest\bdest\fnat\a\fons\bto\bthe\bcurrent pos\ft\fon\bappear\b(w\fth\fn\a\ba\brad\fus\bof\babout\b30\bm\fle\a.).)
Select a de\btination from the\O li\bt of recent de\btination\b.\O
Select a de\btination from the\O li\bt of Marked point\b
(Up to 100 point\b).
Th\fs\broute\breduces\bthe\ause\bof\bh\fghways\b(\ff\bthe\areare\bh\fghways\bon\bthe\bwa\ay).
You\bcan\bdes\fgnate\ba
dest\fnat\fon\bon\bthe\bmap\a.
(Move\bthe\bcrossha\fr
cursor\bto\bthe\bdest\fna\at\fon.)
The\bfollow\fng\bmenus\bw\a\fll\bbe
d\fsplayed\bwhen\b\b\b\b\b\b\b\b\b\b\b\a\b\b\b\b\b\fs
pressed\bon\bthe\bmap\bd\f\asplay.
[Marked\bPo\fnt]
[Dest\fnat\fon]
[Nearest\bPOI]
Enter the
Zipcode.*2
Enter/Select the
city name.*1
Enter/Select the
\btreet name.
Enter/Select
the \btreet
name. Select the
city name.
Select a
de\bired
de\btination
from the li\bt.
Marks\bthe\bdest\fnat\fon
result\fng\bfrom\bthe\bse\aarch.
Enter the target name. Enter the target
city name. Enter the
target name.
Note
The\bresults\bfrom\bthe\b\aroute
search\bare\bnot\balways\bt\ahe
shortest\broutes.\bYou\a\bcannot
always\bavo\fd\bthe\bh\fghway\as\b
even\b\ff\bthe\bh\fghway\b\fs\bs\aet\b
to\b[Avo\fd\bH\fghway].
For\bexample,\byou\bw\fll\bbe\a
on\bthe\bh\fghway\bwhen\by\aour\b
veh\fcle\b\fs\bon\bthe\bh\fghw\aay\b
or\bwhen\byour\bdest\fnat\a\fon\b
ex\fsts\bon\bthe\bh\fghway.\a

Do\bnot\bchange\bthe\bset\at\fngs\band\bdest\fnat\fon\b\alocat\fons\bwh\fle\bdr\fv\fng\a.\bM\fn\fm\fze\bthe\bt\fme\bsp\aent\b Do not keep your eye\b fix\Oed on the monitor \bcreen o\Or operate the \by\btem while d\Oriving.
v\few\fng\bthe\bmon\ftor\bscr\aeen\band\bl\fsten\fng\bto\bt\ahe\bvo\fce\bgu\fdance\bwh\fle\b\adr\fv\fng.\bOperat\fng\bthe\a\b
system\bw\fll\bd\fstract\bt\ahe\bdr\fver\bfrom\blook\fng\a\bahead\bof\bthe\bveh\fcle\ban\ad\bmay\bcause\ban\bacc\fdent.\a\bAlwaysstop\bthe\bveh\fcle\b\fn\ba\bsa\afe\blocat\fon\bbefore\bope\arat\fng\bthe\bsystem.
Route\bsearches\bw\fth\bth\ae\bnav\fgat\fon\bsystem\bcan\b\a\fnclude\broads\bthat\byou\a\bcan\bnot\bdr\fve\bon\band\bro\aadsthat\byou\bare\bproh\fb\fted\a\bfrom\bdr\fv\fng\bon\bdue\bto\a\btraff\fc\bregulat\fons.\b\aPlease\bcomply\bw\fth\bth\ae\btraff\fc\bregulat\fons.\a
Warning\b
Move the cro\b\bhair
Select
cur\bor to the de\btination and \Opre\b\b \O .
(Up\bto\b50\bpo\fnts\b\fnclud\fn\ag\bthe\blatest\bstart\fng\a\bpo\fnt\bare\b\fn\bthe\bsyst\aem\bmemory.)
Routing
*1\bThe\bmemory\bstores\bup\a\bto\b10\bc\ft\fes\bv\fs\fted\brece\antly,\band\bthese\bc\fty\bn\aames\bcan\bbe\bselected.*2\bDepend\fng\bon\bthe\bare\aa,z\fpcode\bsearch\bmay\bno\at\bbe\bposs\fble.
ENTER
( page\b24)
ENTER
ENTERENTERENTERENTER

Setu
1
Open th
\bcreen
How to
a\bE
J
ME
ENT
ENT
30
Setup
2
Re\btoring
default\b
Map\bsett\fng\b(\b\b\b\b\b\b\b\bpage\b\a31)


On\b:\bIcons\bon\ba\bmap.
Off\b:\bNo\b\fcon\bon\ba\bmap.

The\bsett\fng\b\fs\ba\bvar\fable\b\ato\bsu\ft\byour\bprefere\ances.
Route\bsett\fng\b(\b\b\b\b\b\b\b\bpag\ae\b32)
System\bsett\fng\b(\b\b\b\b\b\b\bpa\age\b33)
(\b\b\b\b\b\b\bpage\b9)
Map\barea,\bMap\bd\fsc\b(DVD)\bve\ars\fon\band\bsoftware
vers\fon\bappear.
You\bcan\bcheck\byour\broute\a\bfrom\bthe\bstart\fng\bpo\a\fnt\bto\bthe
dest\fnat\fon.
Th\fs\bfunct\fon\b\fs\bava\flable\a\bafter\broute\bsetup\b\fs\a\bperformed.
You\bcan\bchange\band\bdelet\ae\bmarked\bpo\fnts.
(\b\b\b\b\b\b\b\bpage\b28)
(\b\b\b\b\b\b\b\bpage\b28)
Change\bthe\bveh\fcle\bpos\a\ft\fon.
Change\bthe\bveh\fcle\bd\fre\act\fon. :\b Rotat\fon\b\fn\ba\bclockw\fse\bd\a\frect\fon\bby\b11.25°.
:\bRotat\fon\b\fn\ba\bcountercl\aockw\fse\bd\frect\fonby\b11.25°.
 Stop your vehicle before t\Ohe following operation\bDo\bnot\bchange\bthe\bset\at\fngs\band\bdest\fnat\fon\b\alocat\fons\bwh\fle\bdr\fv\fng\a.\bM\fn\fm\fze\bthe\bt\fme\bsp\aent\bv\few\fng\bthe
mon\ftor\bscreen\band\bl\fs\aten\fng\bto\bthe\bvo\fce\bgu\f\adance\bwh\fle\bdr\fv\fng.\b\bOp\aerat\fng\bthe\bsystem\bw\f\all\b
d\fstract\bthe\bdr\fver\bfro\am\blook\fng\bahead\bof\bthe\a\bveh\fcle\band\bmay\bcause\ban\a\bacc\fdent.
Always\bstop\bthe\bveh\fcle\a\b\fn\ba\bsafe\blocat\fon\band\bp\aut\bthe\bpark\fng\bbrake\bon\b\abefore\boperat\fng\bthe\bs\aystem.
Warning
Open
[Setup Menu]
When\bthe\bactual\bpos\ft\fo\an\bof\byour
veh\fcle\b\fs\bd\ffferent\bfr\aom\bthe\bveh\fcle
pos\ft\fon\bon\ba\bmapU\ber \betting
:\bDefault
1selectMENUENTERENTERENTER
ENTER
ENTER
ENTER
ENTER