Page 13 of 612
PICTORIAL INDEX
xiii
SEAT AND STEERING WHEEL
Page
1Tilt and telescopic steering
control switch 203. . . . . . . . . . . . . . . . . .
2Seat position, seat cushion
angle and height control
switch 115, 116. . . . . . . . . . . . . . . . . . . . .
3Seatback angle control switch 116. . .
4Lumbar support
control switch 117. . . . . . . . . . . . . . . . . .
For detailed information, refer to the
description given in each Section.
Page 17 of 612
Seat position
Head restraint angle Head restraint heightLumbar supportSeatback angle Seat cushion heightSeat cushion angle
TILT STEERING WHEEL
TELESCOPIC STEERING WHEEL
To tilt the steering wheel up or down to the desired angle, push
the control switch in the required direction and release the
button when the steering wheel reaches the desired angle.
To move the steering wheel to the desired position, push the
control switch away from you or pull it toward you until the
steering wheel reaches the desired position.
BPY020
(7.2/5.5)
BPY021
(7.2/59.5)
QUICK REFERENCE
2
1. DRIVER'S SEAT 2. STEERING WHEEL
Page 130 of 612
OCCUPANT RESTRAINT SYSTEMS
11 5
Adjusting front seats
16PY001
1Seat position control switch, seat cushion angle
and height control switch
2Seatback angle control switch
3Lumbar support control switch
Adjusting seat position
Move the control switch in the desired direction.
Releasing the switch will stop the seat in that position. Do not
place anything under the seat, as this might interfere with the
seat movement.
Page 132 of 612

OCCUPANT RESTRAINT SYSTEMS
11 7
Adjusting lumbar support
(Driver's seat only)
Push the control switch on either side.
The amount of lumbar support will change while the switch is
pushed.
REAR SEATS
Rear seat precautions
CAUTION
Adjustment should not be made while the vehicle is
moving.
When folding the seat, secure the seat by adjusting
the length of the anchorage strap to prevent the seat
from falling down.
When returning the seat to its original position,
observe the following precautions in order to prevent
personal injury in a collision or sudden stop.
There is no person or luggage around the seat and
operate slowly by supporting the seat with your
hands.
The seat is securely locked by pushing forward and
rearward on the top of the seatback and by trying to
pull up the edge of the bottom cushion. Failure to do
so will prevent seat belt from operating properly.
The seat belts are not twisted or caught under the
seat and are arranged in their proper position and are
ready to use.
When using the seat, make sure the seat is securely
locked.