2004 ISUZU TF SERIES mass air flow

[x] Cancel search: mass air flow

Page 1830 of 4264

ISUZU TF SERIES 2004  Workshop Manual 6A-6  ENGINE MECHANICAL (6VE1 3.5L) 
Rough Engine Idling or Engine Stalling 
Symptom Possible Cause  Action 
Trouble in fuel injection system  Idle air control valve defective Replace 
 Throttle shutt

Page 1831 of 4264

ISUZU TF SERIES 2004  Workshop Manual ENGINE MECHANICAL (6VE1 3.5L)  6A-7 
Rough Engine Running 
Symptom Possible Cause  Action 
Engine misfires periodically  Ignition coil layer shorted Replace 
 Spark plugs fouling Clean or install hott

Page 1832 of 4264

ISUZU TF SERIES 2004  Workshop Manual 6A-8  ENGINE MECHANICAL (6VE1 3.5L) 
Hesitation 
Symptom Possible Cause  Action 
Hesitation on acceleration  Throttle  Position  Sensor  adjustment 
incorrect Replace throttle valve assembly 
 Throttl

Page 1833 of 4264

ISUZU TF SERIES 2004  Workshop Manual ENGINE MECHANICAL (6VE1 3.5L)  6A-9 
Symptom Possible Cause  Action 
Hesitation at high speeds  Engine Control Module defective Replace 
 Throttle Position Sensor cable broken 
or poor connections Cor

Page 1834 of 4264

ISUZU TF SERIES 2004  Workshop Manual 6A-10  ENGINE MECHANICAL (6VE1 3.5L) 
Engine Lacks Power 
Symptom Possible Cause  Action 
Trouble in fuel system  Fuel Pressure Control Valve not 
working normally Replace 
 Fuel injector clogged Clea

Page 1839 of 4264

ISUZU TF SERIES 2004  Workshop Manual ENGINE MECHANICAL (6VE1 3.5L)  6A-15 
Abnormal Combustion 
Symptom Possible Cause  Action 
Trouble in fuel system  Fuel pressure control valve defectiveReplace 
 Fuel filter clogged Replace 
 Fuel pum

Page 1997 of 4264

ISUZU TF SERIES 2004  Workshop Manual 3.5L ENGINE DRIVEABILITY AND EMISSIONS  6E-1 
ENGINE 
3.5L ENGINE DRIVEABILITY AND EMISSIONS 
CONTENTS 
 
 
ABBREVIATION CHARTS ................................   6E-5
COMPONENT LOCATOR ..............

Page 1998 of 4264

ISUZU TF SERIES 2004  Workshop Manual 6E-2  3.5L ENGINE DRIVEABILITY AND EMISSIONS 
Visual/Physical Engine Compartment 
 Inspection ......................................................   6E-74
Basic Knowledge of Tools Required..........