2004 ISUZU TF SERIES Cylinder head removal

[x] Cancel search: Cylinder head removal

Page 1863 of 4264

ISUZU TF SERIES 2004  Workshop Manual ENGINE MECHANICAL (6VE1 3.5L)  6A-39 
Valve Stem Oil Controller, Valve Spring and Valve Guide 
Removal 
1. Disconnect battery ground cable. 
 Drain engine oil. 
2. Drain engine coolant. 
3. Remove cy

Page 1864 of 4264

ISUZU TF SERIES 2004  Workshop Manual 6A-40  ENGINE MECHANICAL (6VE1 3.5L) 
Piston, Piston Ring and Connecting Rod 
Removal 
  
 
 
F06RW011 
 
Legend 
 (1) Cylinder Head 
 (2) Crankcase with Oil Pan 
 (3) Oil Pipe  
 (4) Oil Strainer 
 (

Page 1877 of 4264

ISUZU TF SERIES 2004  Workshop Manual ENGINE MECHANICAL (6VE1 3.5L)  6A-53 
Disassembly 
NOTE: 
 During disassembly, be sure that the valve train
components are kept together and identified so
that they can be reinstalled in their origin

Page 1903 of 4264

ISUZU TF SERIES 2004  Workshop Manual ENGINE MECHANICAL (6VE1 3.5L)  6A-79 
Piston and Connecting Rod 
Piston, Connecting Rod and Associate Parts 
  
 
 
 
015RW019 
Legend 
 (1) Cylinder Head Assembly 
 (2) Cylinder Head Gasket 
 (3) Cra

Page 1904 of 4264

ISUZU TF SERIES 2004  Workshop Manual 6A-80  ENGINE MECHANICAL (6VE1 3.5L) 
5. Remove oil strainer and O-ring (5). 
6. Remove oil gallery (6). 
7. Remove connecting rod cap with connecting rod
lower bearing (12). 
8. Remove piston and con

Page 1967 of 4264

ISUZU TF SERIES 2004  Workshop Manual IGNITION SYSTEM (6VE1 3.5L)  6D2-3 
Ignition Coil 
Removal 
 1. Disconnect battery ground cable. 
  2. Ignition coil connector and ignition coil. 
 Disconnect three connector from ignition coil. 
 R

Page 2055 of 4264

ISUZU TF SERIES 2004  Workshop Manual 3.5L ENGINE DRIVEABILITY AND EMISSIONS  6E-59 
Carbon fouling of the spark plug is indicated by dry,
black carbon (soot) deposits on the portion of the spark
plug in the cylinder.   Excessive idling a

Page 2365 of 4264

ISUZU TF SERIES 2004  Workshop Manual 3.5L ENGINE DRIVEABILITY AND EMISSIONS 6E-369 
CRANKSHAFT POSITION (CKP) 
SENSOR 
 
Location 
Right-hand side of the cylinder block. 
 
Removal Procedure 
1.  Disconnect the negative battery cable. 
2