2004 HONDA ACCORD COUPE AUX

To load or play CD’s, the ignition
switch must be in the ACCESSORY
(I) or ON(II) position.
You operate the CD player/CD
changer with the same controls used
for the radio. To select the CD
player/CD changer, press the CD
button. The number of the track
playing is shown in the display. With
the in-dash CD changer, the disc and
track numbers are displayed. The
system will continuously play a CD
until you change modes.
Insert a CD into the CD slot. The
drive will pull the CD in the rest of
the way to play it. When the system
reaches the end of the disc, it will
return to the beginning and play the
disc again.To play the radio when a CD is
playing, press the AM/FM button.
Press the CD button again to switch
back to the CD player.
To play the tape when a CD is
playing, insert a tape in the player
(optional). If a tape is in the player,
press the AUX button. Press the CD
button again to switch back to the
CD player. The cassette player is
optional on all U.S. models.
To listen to satellite radio when a CD
is playing, press the CD/SAT button.
If you turn the system of f while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the disc will stay in the drive. When
youturnthesystembackon,theCD
will begin playing where it lef t of f . Press the LOAD button until you
hear a beep and see ‘‘LOAd’’ in the
display (in the upper display on
vehicles with navigation system).
The disc number/icon f or an
empty position is highlighted and
the red light starts blinking.
Insert the disc into the CD slot
when the green CD load indicator
comes on. Insert it only about
half way; the drive will pull it in the
rest of the way. You will see
‘‘BUSY’’ in the display as the CD
load indicator turns red and blinks
as the CD is loaded.
You cannot load and play 3-inch (8-
cm) discs in this system.
You can also play 3-inch (8-cm) discs
without using an adapter ring. 1. 2. 3.
For vehicles with Satellite Radio
For vehicles with in-dash CD changer
LX model
CONT INUED
Playing a CD
Comf ort and Convenience Feat ures
To Play a CD
137
——y
y
(%
y
y

µ
µÛÝ Each time you
press and release , the player
skips forward to the beginning of the
next track. Press and release ,
to skip backward to the beginning of
the current track. Press it twice to
skip to the beginning of the previous
track.
To move rapidly within a track, press
andholdthe or .
Press or to select
an icon and play the disc.
Press the eject button ( ) to
remove the CD. If you eject the CD,
but do not remove it f rom the slot,
the system will automatically reload
the CD af ter 15 seconds and put it in
pause mode. To begin playing, press
the CD button. Press the AM/FM button to switch
to the radio while a CD is playing. To
play the CD, press the CD button.
PresstheAM/FMorCD/SAT
buttontoswitchtotheradioor
satellite radio while a CD is playing.
To play the CD, press the CD button
again.
If tape is in the optional tape player,
press the AUX button to switch to
the tape while a CD is playing. Press
the CD button again to switch back
to the CD player.
If you turn the system of f while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the disc will stay in the drive. When
youturnthesystembackon,theCD
will begin playing where it lef t of f .To remove the disc currently in play,
press the EJECT ( ) button.
When a disc is removed f rom a slot,
the system automatically begins the
load sequence so you can load
another CD in that position. If you do
not remove the disc f rom the
changer within 15 seconds, the
system returns to the previous mode
(AM/FM or satellite radio). The disc
will reload into the system and will
remainthereinapausemode.
To remove a dif f erent disc f rom the
changer,firstselectitwiththe
appropriate preset bar, or the
appropriate icon or the CH/DISC bar.
When that CD begins playing, press
the eject button. Continue pressing
the EJECT button to remove all the
discs f rom the changer.
On LX model
Except f or EX-L and EX-V6 models in
the U.S.
On EX-L and EX-V6 models in the U.S. Except f or LX model
Comf ort and Convenience Feat ures
Playing a CD
SEEK /SK IP CH/DISC
To Stop Playing a CD Removing CD’s From the In-dash
CD Changer
140
——y
y
(%
y
y

Playing a T ape (Opt ional)
Comf ort and Convenience Feat ures146
AM/FM BUTTONAM/FM
BUTTON
RPT INDICATOR
RPT BUTTON
PRESET BARS RPT
BUTTON
RPT
INDICATOR
CD/AUX
BUTTON TAPE DIRECTION INDICATOR
SEEK/SKIP BAR PWR/VOL KNOB NOISE
REDUCTION
INDICATOR TAPE DIRECTION
INDICATOR
CD/AUX
BUTTON NOISE REDUCTION INDICATOR
SEEK/SKIP BAR PRESET BARS PWR/VOL KNOB
EX and LX-V6 models
LX model
——y
y
(%
y
y

CONT INUED
Playing a T ape (Opt ional)
Comf ort and Convenience Feat ures147
AM/FM
BUTTON
PRESET BARS RPT
BUTTON
CD/AUX
BUTTON SEEK/SKIP BAR PWR/VOL KNOB CD/AUX
BUTTON
SEEK/SKIP BAR
PRESET BARS PWR/VOL KNOB
EX-L and EX-V6 models
without Navigation System
(U.S. Vehicles only)
NOISE REDUCTION INDICATOR
RPT
INDICATOR
AM/FM
BUTTON
RPT
BUTTON
TAPE DIRECTION
INDICATOR
TAPE DIRECTION
INDICATOR
RPT INDICATOR
EX-L and EX-V6 models
without Navigation System and Sate
llite Radio System
——y
y
(%
y
y

Î
Î
ÛOn vehicles with navigation system,
first push the AUDIO DISPLAY
button bef ore selecting any of the
audio icons on the audio screen.
Dolby noise reduction turns on
when you insert a tape. The
indicator will light in the
display. If the tape was not recorded
in Dolby, turn it of f by pressing the
Preset 4 (NR) side of the preset bar
or touching the NR icon. Dolby
remains of f until you press the
preset bar or the icon again. To remove the tape, press the
EJECT button on the cassette player.
If you want to turn the player of f ,
press the PWR/VOL knob or turn
of f the ignition. The tape will remain
in the drive. When you turn the
system back on, the tape will be in
pause mode. Press the Preset 3
(PLAY/PROG) side of the preset
barortouchthePLAY/PROGicon
on vehicles navigation system.
To switch to the radio or CD player
while a tape is playing, press the
AM/FM or CD/AUX button (CD/
SAT button on vehicles with
navigation system). To change back
to the tape player, push the CD/AUX
or CD/SAT button.
The ignition switch must be in
ACCESSORY (I) or ON (II). Make
sure the open side of the tape is
facing right, then insert the tape
most of the way into the slot. The
system will pull the tape in the rest
of the way, and begin to play it.
The tape direction indicator will light
to show you which side of the tape is
playing. The indicates the side
youinsertedupwardisnowplaying.
If you want to play the other side,
press the Preset 3 (PLAY/PROG)
side of the preset bar or touch the
PLAY/PROG icon on vehicles with
navigation system. When the player
reaches the end of the tape, it will
automatically reverse direction and
play the other side.
Dolby noise reduction manuf actured under
license from Dolby Laboratories Licensing Corpo-
ration. ‘‘DOLBY’’ and the double-D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
Optional on all U.S. models
To Play a Tape To Stop Playing a Tape
Comf ort and Convenience Feat ures
Playing a T ape (Opt ional)
149
——y
y
(%
y
y