2004 HONDA ACCORD COUPE reset

Playing the Radio
Comf ort and Convenience Feat ures122
AM/FM BUTTON
PWR/VOL KNOBSEEK BAR UPPER DISPLAY
AUDIO DISPLAY BUTTON TUNE/SOUND KNOB
SOUND ICON
AUDIO SELECT ICON
SCAN BUTTON
STEREO INDICATOR
SCAN ICON
EX-L and EX-V6 models
with Navigation System (U.S. Vehicles only)
PRESET ICONS
——y
y
(%
y
y

µ
µ µ
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
PWR/VOL knob or the AM/FM
button. Adjust the volume by turning
thesameknob.
Pushing the AUDIO DISPLAY
button will also turn on the system.
The band and f requency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
XM Satellite Radio inf ormation is
available on page . You can use any of f ive methods to
f ind radio stations on the selected
band: the
preset bars/icons, and
.
Use the TUNE bar or
knob to tune the radio to a desired
f requency. Press the side of the
bar or turn the knob to the right to
tune to a higher f requency, and
press the side or turn the knob
to the left to tune to a lower
f requency.
The SEEK f unction
searches up and down f rom the
current f requency to f ind a station
with a strong signal. To activate it,
press the or side of the
bar, then release it. The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it, or touch the SCAN
icon on vehicles with navigation
system. You will see SCAN in the
display. The system will scan f or a
station with a strong signal. When it
f inds one, it will stop and play that
station f or about f ive seconds.
If you do nothing, the system will the
scan f or the next strong station and
play it f or f ive seconds. When it plays
a station you want to listen to, press
the SCAN button or touch the SCAN
icon again.
128
For Vehicles with Navigation System
CONT INUED
Playing the Radio
Comf ort and Convenience Feat ures
To Play the Radio To Select a Station TUNE,SEEK,SCAN,AUTO
SEL ECT
TUNE SEEK SCAN
123
——y
y
(%
y
y

µµµ
µ
Each side of the bars (1
6) or preset icon can store one
f requency on AM, and two
f requencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two f requencies with each side of
the preset bar or each preset icon. The preset f requencies will be lost if
your vehicle’s battery goes dead, is
disconnected, or the radio f use is
removed.
If you are
traveling far from home and can no
longer receive your preset stations,
you can use the Auto Select f eature
to find stations in the local area.
Press the A. SEL button or touch the
AUTO SELECT icon. ‘‘A. SEL’’
f lashes in the display (the upper
display on vehicles with navigation
system), and the system goes into
scan mode f or several seconds. It
stores the f requencies of six AM,
and twelve FM stations in the preset
bars or icons.
You will see a ‘‘0’’ displayed af ter
pressing a preset bar or icon if Auto
Select cannot f ind a strong station
foreverypresetbaroricon. If you do not like the stations Auto
Select has stored, you can store
other f requencies on the preset bars
or icons. Use the TUNE, SEEK, or
SCAN f unction to f ind stations, then
store them in the preset bars or
icons as described previously.
press the
A.SEL button or touch the AUTO
SELECTicon.Thisrestoresthe
presets you originally set.
First push the AUDIO DISPLAY
button to view the preset icons.
Press the SOUND button repeatedly
to display the Bass (BAS), Treble
(TRE), Balance (BAL), and Fader
(FAD) setting. On vehicles with
navigation system, touch the
SOUND icon or press the TUNE
knob.
UsetheTUNE,SEEK,orSCAN
function to tune the radio to a
desired station.
Pick a preset number (1 6), and
hold it until you hear a beep.
Repeat steps 1 to 3 to store a total
of six stations on AM and twelve
stations on FM.
Press the lef t or right side of the
bar or icon and hold it until you
hear a beep.
1. 2. 3. 4.
To turn of f Auto Select,
For Vehicles with Navigation System
Playing the Radio
Comf ort and Convenience Feat ures
Preset
AUTO SELECT
Adjusting the Sound
124
——y
y
(%
y
y

Comf ort and Convenience Feat ures
Playing t he XMSatellite Radio
128
PWR/VOL KNOB
TUNE BAR
PWR/VOL KNOB
SCAN BUTTON Without Navigation System
With Navigation System
CD/SAT
BUTTON DISP
BUTTON
PRESET BARS CATEGORY/CHANNEL MODE INDICATOR
MODE ICON
SCAN ICON
CD/SAT
BUTTON
PRESET ICONS
AUDIO DISPLAY
BUTTON
SEEK/SKIP
BAR SCAN
BUTTON
CATEGORY/CHANNEL
MODE INDICATOR
SEEK/SKIP
BAR TUNE KNOB
U.S. EX-L and EX-V6 models
CH/DISC BAR
——y
y
(%
y

y

µ
µ µ
µ
The
SEEK/SKIP f unction selects the
various categories in XM, such as
Jazz/Blues, Rock, Classical, etc.
Push the to change the
category f orward. Push the to
change the category backward. To
search f or channels within a
category, turn the TUNE knob
clockwiseorpresstheTUNEbar .
Press and release this
button to change the display. The
display will change in the f ollowing
sequence: channel name, channel
number, category, artist name, and
music title. The SCAN f unction
samples all channels f or 5 seconds.
To activate the function, push the
SCAN button. Push it again to get
out of the sequence.
Each preset icon or each
side of the preset bar can store one
channel in XM1 and one in XM2.
Push the SAT button, you will see
XM1 or XM2.
Use the TUNE, SEEK or SCAN
function to tune the radio to a
desired channel.
Pick a preset icon or number and
hold it until you hear a beep.
Repeat step 1 to 3 to store a total
of six stations on XM1 and six on
XM2. Once your XM channels are preset,
pressing either side of the CH/DISC
bar will select your preset channels.
1. 2. 3. 4.
Vehicles with Navigation System On vehicles with navigation system
Comf ort and Convenience Feat ures
SEEK /SK IP (CA T EGORY)
DISPSCAN
Preset
Playing t he XMSatellite Radio
130
——y

y
(%
y
y

µ
µ
´
Û
Ý
µ µ
µ
When the CD load indicator turns
green and ‘‘LOAd’’ appears in the
screen again, insert the next CD in
the slot.
Repeat this until all six positions
are loaded. If you are not loading
all six positions, the system begins
playing the last CD loaded.
To select a dif f erent disc, press the
appropriate side of a preset bar (1
6) or use the Preset 5 (DISC ) to
select the previous disc or Preset 6
(DISC ) to select the next disc in
sequence. On vehicles with
navigation system, touch the
appropriate disc icon or press the
or side of the CH/DISC bar. If
youselectanemptypositioninthe
CD changer, the system will try to
load the CD in the next available slot.
Each time you
press and release side, the
player skips f orward to the
beginning of the next track. Press
and release side, to skip
backward to the beginning of the
current track. Press it again to skip
to the beginning of the previous
track. To move rapidly within a track, press
andholdthe or side.
The SCAN function
samples all the tracks on the
selected disc in the order they are
recorded on the CD. To activate it,
press and release the SCAN button.
You will see SCAN in the display.
You will get a 10 second sampling of
each track on the selected CD. Press
the SCAN button again to get out of
the system.
This f unction samples
each f irst track of all the discs in the
in-dash CD changer in the order they
are stored. To activate it, select the
D-SCAN mode by pressing and
holding the SCAN button. You will
see D-SCAN in the display. You will
get a 10 second sampling of the f irst
track on each CD. Press the SCAN
button again to get out of the system.
You can also load a CD into an empty
position while a CD is playing by
pressing the appropriate side of a
preset bar or touching a disc icon.
The system stops playing the current
CD and starts the loading sequence.
It plays the CD just loaded.
You operate the CD changer with
the same controls used f or the radio.
The numbers of the disc and track
playingareshowninthedisplay.On
vehicles with navigation system,
these numbers also appear in the
upper display.
4. 5.
On vehicles with in-dash CD changer
Except f or LX model
Comf ort and Convenience Feat ures
Playing a CD
For Vehicles wit hout Navigat ionSyst em
SEEK /SK IP SCAN
D-SCAN
138
——y
y
(%
y

y

µ
µÛÝ Each time you
press and release , the player
skips forward to the beginning of the
next track. Press and release ,
to skip backward to the beginning of
the current track. Press it twice to
skip to the beginning of the previous
track.
To move rapidly within a track, press
andholdthe or .
Press or to select
an icon and play the disc.
Press the eject button ( ) to
remove the CD. If you eject the CD,
but do not remove it f rom the slot,
the system will automatically reload
the CD af ter 15 seconds and put it in
pause mode. To begin playing, press
the CD button. Press the AM/FM button to switch
to the radio while a CD is playing. To
play the CD, press the CD button.
PresstheAM/FMorCD/SAT
buttontoswitchtotheradioor
satellite radio while a CD is playing.
To play the CD, press the CD button
again.
If tape is in the optional tape player,
press the AUX button to switch to
the tape while a CD is playing. Press
the CD button again to switch back
to the CD player.
If you turn the system of f while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the disc will stay in the drive. When
youturnthesystembackon,theCD
will begin playing where it lef t of f .To remove the disc currently in play,
press the EJECT ( ) button.
When a disc is removed f rom a slot,
the system automatically begins the
load sequence so you can load
another CD in that position. If you do
not remove the disc f rom the
changer within 15 seconds, the
system returns to the previous mode
(AM/FM or satellite radio). The disc
will reload into the system and will
remainthereinapausemode.
To remove a dif f erent disc f rom the
changer,firstselectitwiththe
appropriate preset bar, or the
appropriate icon or the CH/DISC bar.
When that CD begins playing, press
the eject button. Continue pressing
the EJECT button to remove all the
discs f rom the changer.
On LX model
Except f or EX-L and EX-V6 models in
the U.S.
On EX-L and EX-V6 models in the U.S. Except f or LX model
Comf ort and Convenience Feat ures
Playing a CD
SEEK /SK IP CH/DISC
To Stop Playing a CD Removing CD’s From the In-dash
CD Changer
140
——y
y
(%
y
y

µ´ µ´
You can also eject discs when the
ignition switch is of f . The disc that
was last selected is ejected f irst. An optional six or eight disc CD
changer is available f or your vehicle
f rom your Honda dealer.
This disc changer uses the same
controls used f or the in-dash CD
player/changer or the radio.
Load the desired CDs in the
magazine, and load the magazine in
the changer according to the
instructions that came with the unit.
To select the CD changer, press the
CD button. The disc and track
numbers will be displayed. To select
a dif f erent disc, use the Preset 5
(DISC ) side or Preset 6 (DISC )
side of the preset bar. To select the
previous disc, press the Preset 5
(DISC ) or Preset 6 (DISC ) to
select the next disc in sequence.If you select an empty slot in the
magazine, the changer will search
f or the next available CD to load and
play.
On LX model, if there are no CDs in
the changer, the display will f lash,
and you will have to select another
mode.
Playing a CD
Comf ort and Convenience Feat ures
Operating the Optional CD
Changer
141
——y
y
(%
y
y