2004 FORD THUNDERBIRD fuel

[x] Cancel search: fuel

Page 136 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual Fuse/RelayLocation Fuse Amp
Rating Power Distribution Box
Description
27 30A** SSP1
28 30A** REM -Right front window
29 30A** Rear defroster
30 —Not used
31 40A** Convertible top motor
32 30A** SSP2

Page 144 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual 4. Make the final connection of the negative (-) cable to the spare tire
tie-down stud. (Your vehicle may be equipped with a plastic cap on top
of the tire tie-down stud. This cap must be removed prio

Page 154 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual In the CAMVAP program, impartial third-party arbitrators conduct
hearings at mutually convenient times and places in an informal
environment. These impartial arbitrators review the positions of the
pa

Page 157 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual WASHING THE EXTERIOR
Wash your vehicle regularly with cool or lukewarm water and a neutral
Ph shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is available
from your dealer.
• Never use str

Page 158 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual PAINT CHIPS
Your dealer has touch-up paint and sprays to match your vehicle’s color.
Take your color code (printed on a sticker in the driver ’s door jam) to
your dealer to ensure you get the corr

Page 160 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual •Do not use fuel, kerosene, or paint thinner to clean any parts.
• Wiper blades can be cleaned with isopropyl (rubbing) alcohol or
windshield washer solution. Be sure to replace wiper blades when

Page 163 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual SERVICE RECOMMENDATIONS
To help you service your vehicle:
•We highlight do-it-yourself items in the engine compartment for easy
location.
• We provide a scheduled maintenance guide which makes tra

Page 167 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual 3. Recheck the engine oil level. Make sure the oil level is not above the
MAX mark on the engine oil level indicator (dipstick).
4. Install the indicator and ensure it is fully seated.
5. Fully instal