2004 FORD THUNDERBIRD window

[x] Cancel search: window

Page 41 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual closed. To re-calibrate the window, press the up switch to raise the
window until it completes its travel and hold the switch down for 2
seconds. Another possible effect of lost calibration is that th

Page 50 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual 2. The amber indicator light will begin to flash after 20 seconds. Without
releasing the HomeLinkbutton, follow step 2 in the “Programming ”
section.
For questions or comments, contact HomeLink 

Page 54 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual Convertible top and padded molding care
To avoid damage to the cloth top and moldings, use only an approved
Ford cleaner, or equivalent. Do not use abrasive material or cleaners.
Hot waxes applied by

Page 109 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual STARTING
Positions of the ignition
1. LOCK, locks the gearshift lever
and allows key removal. (The
steering wheel will not lock after
key removal.)
2. OFF, shuts off the engine and all
accessories exc

Page 112 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual Using the engine block heater (if equipped)
An engine block heater warms the engine coolant which aids in starting
and heater/defroster performance. Use of an engine block heater is
strongly recommend

Page 135 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual The high-current fuses are coded as follows.
Fuse/RelayLocation Fuse Amp
Rating Power Distribution Box
Description
1 15A* Rear Electronics Module (REM)
2 5A* License plate lamp and rear side markers
3

Page 136 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual Fuse/RelayLocation Fuse Amp
Rating Power Distribution Box
Description
27 30A** SSP1
28 30A** REM -Right front window
29 30A** Rear defroster
30 —Not used
31 40A** Convertible top motor
32 30A** SSP2

Page 159 of 216

FORD THUNDERBIRD 2004 11.G Owners Manual •Cover the highlighted areas to prevent water damage when cleaning
the engine.
• Never wash or rinse the engine while it is running; water in the
running engine may cause internal damage.
PLASTIC
Page:   < prev 1-8 9-16 17-24 next >