MOTORCRAFT PART NUMBERS
Component 2.0L SVT Zetec engine
Air filter FA-1688
Battery BXT-96R
Oil filter FL-2005 W
Refill capacities
Fluid Ford Part Name Capacity
Brake fluid Motorcraft High
Performance DOT 3
Motor Vehicle
Brake FluidFill to line on reservoir
Engine oil (includes
filter change)Motrcraft 5W30
Super Premium
Motor Oil meeting
Ford specification
WSS-M2C205–A4.25L (4.5 quarts)
Engine coolant
*Motorcraft
Premium Gold
Engine Coolant
(yellow-colored)5.75L (6.1 quarts)
Fuel tank N/A 50L (13.2 gallons)
Power steering fluid Motorcraft
MERCONAT FFill to line on reservoir 0.9L
(0.95 quarts)
Transaxle fluid
**Motorcraft Full
Synthetic Manual
Transmission Fluid
Motorcraft
MERCONVATF2.0L (2.1 quarts)
Windshield washer
fluidMotorcraft
Premium
Windshield Washer
Concentrate4.0L (4.2 quarts)
*Add the coolant type originally equipped in your vehicle.
**Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface
Maintenance
Maintenance
14
Lubricant specifications
ItemFord Part
Name or
EquivalentFord Part
NumberFord
Specification
Engine oil Motorcraft SAE
5W-30 Super
Premium Motor
OilXO-5W30-QSP WSS-M2C205-A
with API
Certification
Mark
For all other lubricant specifications, refer to theFocus Owner’s Guide
Octane recommendations
Your vehicle is designed to use
“Premium”unleaded gasoline with
an (R+M)/2 octane rating of 91 or
higher. The use of gasoline with
lower octane ratings may damage
the engine. Gasoline labeled as“Premium”in high altitude areas that are
sold with octane ratings of less than 91 are not recommended.
If your engine knocks under any driving conditions while you are using
fuel with the recommended octane rating, see your dealer or a qualified
service technician to prevent any engine damage.
Synthetic fluids
There are no synthetic fluids or break-in fluids in your SVT Focus engine
when it leaves the factory. Note that SVT does not make
recommendations about the use of synthetic oils in your engine. should
you decide to use synthetic engine oil, we recommend you allow 4,000 to
6,000 (6,500 km to 9,600 km) in order to assure complete break-in
before switching to synthetic oil.
Maintenance and break-in
For complete maintenance and break-in procedure information, please
refer to yourFocus Owner’s Guide.
91(R+M)/2 METHOD
Maintenance
15
