2004 FORD F750 oil viscosity

Engine oil and filter recommendations—6.0L Power Stroke engine
To help achieve proper engine performance and durability, it is important
that you:
•Use only engine lubricating oils and oil filters of the proper quality.
•Change the engine oil and filterno laterthan the recommended
service interval. Refer to the general maintenance information section
for the appropriate intervals for changing the engine oil and filter.
•Change your engine oil and filter more frequently if your vehicle
operation includes extended periods of idling or low-speed operation,
driving for a long time in cold temperatures or short driving distances.
Diesel engines require specially formulated oil to resist contamination.
Proper quality oils also provide maximum efficiency of the crankcase
ventilation system which reduces air pollution.
For normal or severe service, use Motorcraft oil or an equivalent oil
conforming to Ford Specification WSS-M2C171–C or API Service
categories CI-4 or CI-4/SL. If CI-4 oil is not available, CH-4 is acceptable.
Diesel engine oils with improved fuel economy properties (energy
conserving) are currently available. If you use an energy conserving oil,
be sure it meets Ford specification WSS-M2C171–D or API service
category designation CI-4/SL and is of the proper viscosity grade for the
temperature range in which you expect to operate your vehicle. Some
energy conserving oils do not meet the requirements necessary for your
diesel engine.
2004 F650/750(f67)
Supplement
USA English(fus)
Maintenance and specifications
168

* Heavy duty trailer towing with ambient temperatures above 10°C
(50°F) requires 15W-40 engine oil.
Using the chart, determine which SAE viscosity grade best suits the
temperature range in which you expect to operate your vehicle. The use
of the correct oil viscosity grade for diesel engines is important for
satisfactory engine operation.
A symbol has been developed by the American Petroleum Institute (API)
to help you select the proper engine oil. The symbol will be included on
the oil container you purchase.
The top section of the symbol shows
the API service category
designation. This should be CI-4/SL.
The center section of the API
symbol shows the SAE viscosity
grade.
The lower section of the API symbol will stateenergy conservingif the
engine oil has been proven to have fuel savings capabilities.
Use a Ford engine oil filter, part number FL-1995 or equivalent. This
filter protects your engine by filtering harmful, abrasive or sludge
particles.
SAE VISCOSITY GRADES
EXPECTED TEMPERATURE RANGE
F˚ -20 -10 0 10 20 30 40
40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 C˚50 60 70 80 90 100
*15W-40 Preferred
10W-30
5W-30
0W-30Preferred
2004 F650/750(f67)
Supplement
USA English(fus)
Maintenance and specifications
169

LUBRICANT SPECIFICATIONS
Component /
Component vendorLubrication type Vendor
recommendations:
Viscosity / Ambient
temperature / NotesEquivalent Ford
part name / number
Non-driving front axle
Eaton-Spicer axle
(generic) - front
axle wheel bearing
oilMultipurpose EP
gear lube of API
GL-5 quality meeting
MIL-PRF-2105E
specifications
including synthetic*
lubricants. (* Do not
mix conventional
and synthetic
lubricants.)SAE 75W:–40°Cto
–26°C(–40°Fto
–15°F)Motorcraft SAE
75W-90 Fuel
Efficient High
Performance
Synthetic Rear Axle
Lubricant /
XY-75W90–TQL
SAE 75W-80:–40°C
to 27°C(–40°Fto
80°F)Motorcraft SAE
75W-90 Fuel
Efficient High
Performance
Synthetic Rear Axle
Lubricant /
XY-75W90–TQL
SAE 75W-90:–40°C
to 38°C(–40°Fto
100°F)Motorcraft SAE
75W-90 Fuel
Efficient High
Performance
Synthetic Rear Axle
Lubricant /
XY-75W90–TQL
SAE 75W-140:–40°C
and above (–40°F
and above)Motorcraft SAE
75W-90 Fuel
Efficient High
Performance
Synthetic Rear Axle
Lubricant /
XY-75W140–QL
SAE 80W-90:–26°C
to–38°C(–15°Fto
100°F)Motorcraft SAE
80W-90 Premium
Rear Axle Lubricant
/ XY-80W90–QL
SAE 80W-140:–26°C
and above (–15°F
and above)Motorcraft SAE
75W-140 High
Performance Rear
Axle Lubricant /
XY-75W140–QL
SAE 85W-140:–12°C
and above (10°Fand
above)Motorcraft SAE
75W-140 High
Performance Rear
Axle Lubricant /
XY-75W140–QL
2004 F650/750(f67)
Supplement
USA English(fus)
Maintenance and specifications
207

Component /
Component vendorLubrication type Vendor
recommendations:
Viscosity / Ambient
temperature / NotesEquivalent Ford
part name / number
Spicer axle - front
axle wheel bearing
oilMultipurpose EP
gear lube of API
GL-5 quality meeting
MIL-PRF-2105E
specifications
including synthetic*
lubricants.(* Do
not mix
conventional and
synthetic
lubricants.)SAE 75W:–40°Cto
0°C(–40°Fto32°F)Motorcraft SAE
75W-90 Fuel
Efficient High
Performance
Synthetic Rear Axle
Lubricant /
XY-75W90–TQL
SAE 75W-90:–40°C
to 38°C(–40°Fto
100°F)Motorcraft SAE
75W-90 Fuel
Efficient High
Performance
Synthetic Rear Axle
Lubricant /
XY-75W90–TQL
SAE 75W-140:–40°C
and above (–40°F
and above)Motorcraft SAE
75W-140 High
Performance Rear
Axle Lubricant /
XY-75W140–QL
SAE 80W:–26°Cto
21°C(–15°Fto
70°F)Motorcraft SAE
80W-90 Premium
Rear Axle Lubricant
/ XY-80W90–QL
SAE 80W-140:–26°C
and above (–15°F
and above)Motorcraft SAE
75W-140 High
Performance Rear
Axle Lubricant /
XY-75W140–QL
SAE 90W:–12°Cto
38°C (10°Fto
100°F)SAE 90 Hypoid Gear
Oil / C6AZ-19580–E
SAE 85W-140:–12°C
and above (10°Fand
above)Motorcraft SAE
75W-140 High
Performance Rear
Axle Lubricant /
XY-75W140–QL
SAE 140W: 4°Cand
above (40°Fand
above)Motorcraft SAE
75W-140 High
Performance Rear
Axle Lubricant /
XY-75W140–QL
2004 F650/750(f67)
Supplement
USA English(fus)
Maintenance and specifications
208

Component /
Component vendorLubrication type Vendor
recommendations:
Viscosity / Ambient
temperature / NotesEquivalent Ford
part name / number
Clutch
Release bearing /
shafts / forkGC/LB NLGI #2
lithium
complex-based moly
grease or
multi-purpose
lithium complex
grease—Motorcraft Premium
Long Life Grease /
XG-1-C
Cooling system
Coolant - 6.0L Power
Stroke engineWSS-M97B51-A1—Motorcraft Premium
Gold Engine Coolant
/ VC-7-A
Coolant - Cummins
B and Caterpillar
enginesRefer to engine operator manual
Windshield washer
Washer fluid WSB-M8B16-A2—Motorcraft Premium
Windshield Washer
Concentrate /
ZC-32-A
Transmission
Eaton-Fuller Petroleum oil:
Engine oil API-SL or
API-CF
(MIL-L-2104E or
MIL-L-46152E)SAE 50:–12°C
(above 10°F)—
SAE 40:–12°C
(below 10°F)—
Mineral gear oil:
API-GL-1 (rust and
oxidation inhibited)SAE 80W–90:–12°C
(above 10°F)—
SAE 75W:–12°C
(below 10°F)—
Synthetic oil:
Eaton
, Roadranger

synthetic CD-50
transmission fluidCD SAE 50: All
temperatures—
2004 F650/750(f67)
Supplement
USA English(fus)
Maintenance and specifications
210

Component /
Component vendorLubrication type Vendor
recommendations:
Viscosity / Ambient
temperature / NotesEquivalent Ford
part name / number
Spicer
(non-synchronized)
(lubricants are listed
in order of
preference)Petroleum oil:
Engine oil API-SL or
API-CF
(MIL-L-2104E or
MIL-L-46152E)SAE 50:–18°C
(above 0°F)—
SAE 40:–18°C
(below 0°F)—
Mineral gear oil:
API-GL-1 (rust and
oxidation inhibited)
(EP gear oils are not
acceptable)SAE 90:–18°C
(above 0°F)—
SAE 80:–18°C
(below 0°F)—
Synthetic oil:
Synthetic Engine Oil
meeting
MIL-L-2104E or
MIL-L-46152E,
API-SL or API-CFCD SAE 50: All
temperatures—
Spicer
(synchronized)
(lubricants are listed
in order of
preference)Petroleum oil:
Engine oil API-SL or
API-CF
(MIL-L-2104E or
MIL-L-46152E)SAE 50:–12°C
(above 10°F)—
SAE 40:–12°C
(below 10°F)—
Mineral gear oil:
API-GL-1 (rust and
oxidation inhibited)SAE 90:–12°C
(above 10°F)—
SAE 80W:–12°C
(below 10°F)—
Spicer
(synchronized)
(cont’d)Synthetic oil:
Synthetic Engine Oil
meeting
MIL-L-2104E or
MIL-L-46152E,
API-SL or API-CFSAE 50: All
temperatures—
2004 F650/750(f67)
Supplement
USA English(fus)
Maintenance and specifications
211

Component /
Component vendorLubrication type Vendor
recommendations:
Viscosity / Ambient
temperature / NotesEquivalent Ford
part name / number
Meritor Petroleum oil: Heavy
Duty Engine Oil
MIL-L-2104E or
API-SL or API-CF
(previous API
designations
acceptable)SAE 50:–12°C
(above 10°F)—
SAE 40:–12°C
(above 10°F)—
SAE 30:–12°C
(below 10°F)Motorcraft SAE 30
Super Duty Motor
Oil / XO-30-QSD
Mineral gear oil with
rust and oxidation
inhibitor API-GL-1*
(* Do not use
multi-weight and
GL-5 EP gear oils;
they may cause
transmission failure
or damage.)SAE 90:–12°C
(above 10°F)—
SAE 80:–12°C
(below 10°F)—
Synthetic oil:
MIL-L-2104E or
MIL-L-46152D (* Do
not use multi-weight
and GL-5 EP gear
oils; they may cause
transmission failure
or damage.)—SAE 50: All
temperatures—
Allison Refer to
transmission manual——
Rear axle
Eaton-Spicer -
two-speed axlesRHEOLUBE 362 (or
equivalent) (Eaton
part number
113741)——
2004 F650/750(f67)
Supplement
USA English(fus)
Maintenance and specifications
212

Component /
Component vendorLubrication type Vendor
recommendations:
Viscosity / Ambient
temperature / NotesEquivalent Ford
part name / number
Spicer - single-speed Multipurpose EP
gear lube of API
GL-5 quality meeting
MIL-PRF-2105E
sepcifications
including synthetic
lubricantsSAE 75W:–40°Cto
0°C(–40°Fto32°F)Motorcraft SAE
75W-90 Fuel
Efficient High
Performance Axle
Lubricant /
XY-75W90-FEHP
SAE 75W-90:–40°C
to 38°C(–40°Fto
100°F)Motorcraft SAE
75W-90 Fuel
Efficient High
Performance Axle
Lubricant /
XY-75W90-FEHP
SAE 75W-140:–40°C
and above (–40°F
and above)Motorcraft SAE
75W-140 High
Performance Rear
Axle Lubricant /
XY-75W140-QL
SAE 80W:–26°Cto
21°C(–15°Fto
70°F)Motorcraft SAE
75W-90 Fuel
Efficient High
Performance Axle
Lubricant /
XY-75W90-FEHP
SAE 80W-140:–26°C
and above (–15°F
and above)Motorcraft SAE
75W-140 High
Performance Rear
Axle Lubricant /
XY-75W140-QL
SAE 90W:–12°Cto
38°C (10°Fto
100°F)SAE 90 Hypoid Gear
Oil / C6AZ-19580-E
SAE 85W-140:–12°C
and above (10°Fand
above)Motorcraft SAE
75W-140 High
Performance Rear
Axle Lubricant /
XY-75W140-QL
SAE 140W: 4°Cand
above (40°Fand
above)Motorcraft SAE
75W-140 High
Performance Rear
Axle Lubricant /
XY-75W140-QL
2004 F650/750(f67)
Supplement
USA English(fus)
Maintenance and specifications
214