2004 DODGE DAKOTA seats

4. Remove the slack in the tether strap so that both
anchor straps are pulled tight.Tether Straps at the Front Center Seat (Regular Cab
With Any Bench Seat)
1. Route the child restraint tether strap up and over the
center seat back.
2. Thread the tether strap through the anchor strap inner
loop (loop with metal ring), located directly behind the
center seat.
3. Route the tether strap across to the anchor strap
installed directly behind the passenger's seat location,
and attach the tether strap hook to the anchor strap metal
ring.
Regular Cab With All Seats
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47
2

Tether Straps at the Rear Passenger Seat (Club Cab
and Quad Cab Rear Seats)
1. Route the child restraint tether strap through the
anchor strap inner loop (loop with metal ring attached),
located directly behind the child restraint.
2. Route the tether strap across to the next nearest
installed anchor strap, and attach the tether strap hook to
the anchor strap metal ring.
3. Remove the slack in the tether strap so that both
anchor straps are pulled tight.
NOTE:Every Club Cab model has a cab-back panel
with a flip-down door (padded bolster). The symbol
below is located on this door.
Club/Quad Cab Rear Seat
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49
2

Multiple Child Restraint Installation Sequence
1. Thread the child restraint tether strap hook through
the inner loop, located directly behind the child restraint.
2. After following step 1 for either of the two outer seats,
route the tether strap hook to the metal ring on the inner
loop behind the center seat and attach the hook to the
metal ring.3. After following step 1 for the center child restraint,
route the tether strap hook to the metal ring on the inner
loop, located behind the passenger's seat. Attach the
tether strap hook to the metal ring
NOTE:Two Anchors must be used for either of the
three seating positions.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

WARNING!
An incorrectly anchored tether strap could lead to
seat failure and injury to the child. In a collision, the
seat could come loose and allow the child to crash
into the inside of the vehicle or other passengers, or
even be thrown from the vehicle. Use only the
anchor positions directly behind the child restraint
to secure a child restraint top tether strap. See your
dealer for help if necessary.
Children Too Large for Booster Seats
Children who are large enough to wear the shoulder belt
comfortably, and whose legs are long enough to bend
over the front of the seat when their back is against the
seat back should use the lap/shoulder belt in a rear seat.
²Make sure that the child is upright in the seat.
²The lap portion should be low on the hips and as snug
as possible.
²Check belt fit periodically. A child's squirming or
slouching can move the belt out of position.If the shoulder belt contacts the face or neck, move the
child closer to the center of the vehicle. If this doesn't
help, move the child to the center rear seating position
and use the lap belt. Never allow a child to put the
shoulder belt under an arm or behind their back.
ENGINE BREAK-IN RECOMMENDATIONS
A long break-in period is not required for the engine in
your new vehicle. Drive moderately during the first 300
miles (500 km). After the initial 60 miles (100 km), speeds
up to 50 or 55 mph (80 or 90 km/h) are desirable. While
cruising, brief full-throttle acceleration, within the limits
of local traffic laws, contributes to a good break-in.
Avoid wide open throttle acceleration in low gear.
The engine oil installed in the engine at the factory is a
high-quality, energy-conserving type lubricant. Oil
changes should be consistent with anticipated climate
conditions under which vehicle operations will occur.
The recommended viscosity and quality grades are
shown in Section 7.
NON-DETERGENT OR STRAIGHT MINERAL OILS
MUST NEVER BE USED.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

UNDERSTANDING THE FEATURES OF YOUR VEHICLE
CONTENTS
mMirrors..............................58
NInside Day/Night Mirror.................58
NAutomatic Dimming MirrorÐ If Equipped....59
NOutside Mirrors.......................59
NExterior Mirrors Folding Feature...........59
NElectric Remote-Control Mirrors............60
NHeated Mirrors Ð If Equipped.............61
mSeats................................61
NSeat Adjustment.......................61
NReclining Seats........................62
N6 - Way Power Seat Adjuster Ð Driver's Side
Only...............................63NLumbar Support Adjustment Ð Power Seats
Only...............................63
NSeatback Releases Ð Bench Seat............63
NSeatback ReleasesÐBucket And Split Bench....64
NClub Cab Easy Entry System..............64
NClub Cab/Quad Cab Rear Seat.............65
mTo Open And Close The Hood.............66
mLights...............................67
NInterior Lights........................67
NBattery Saver.........................68
NHeadlamp Delay.......................68
NHeadlights, Parking Lights, Panel Lights......68
3

WARNING!
Vehicles and other objects seen in the right side
convex mirror will look smaller and farther away
than they really are. Relying too much on your right
side mirror could cause you to collide with another
vehicle or other object. Use your inside mirror when
judging the size or distance of a vehicle seen in the
right side mirror.
Heated Mirrors Ð If Equipped
Heated mirrors are automatically activated when you
depress the rear window defroster switch located on the
instrument panel. The light will illuminate to indicate
that the heating elements are ON. Turning OFF the
ignition will deactivate the heated mirrors.
SEATS
Seat Adjustment
The adjusting lever is at the front of the seat, near the
floor. Lift the lever and move the seat to the desired
position.
Using body pressure, move forward and rearward on the
seat to be sure the seat adjusters have latched.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 61
3

WARNING!
Adjusting a seat while the vehicle is moving is
dangerous. The sudden movement of the seat could
cause you to lose control. The seat belt might not be
properly adjusted and you could be injured. Adjust
any seat only while the vehicle is parked.
Reclining Seats
Both the bucket seats and the split-bench seats are
equipped with recliners. The reclining mechanism is
operated by a control located on the outboard side of the
seat. To recline, lean forward slightly before lifting the
lever, then push back to the desired angle and release the
lever. Lean forward and lift the lever to return the
seatback to its normal position.
WARNING!
Do not ride with the seatback reclined so that the
shoulder belt is no longer resting against your chest.
In a collision you could slide under the seat belt and
be seriously or even fatally injured. Use the recliner
only when the vehicle is parked.
62 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

6 - Way Power Seat Adjuster Ð Driver's Side
Only
The 6-way power seat adjuster switch is on the outboard
side of the driver's seat. Use this switch to move the seat
up or down, forward or rearward, recline or tilt.
Lumbar Support Adjustment Ð Power Seats Only
Vehicles equipped with the power bucket seat or the
40/20/40 split bench power are equipped with an adjust-
able lumbar support on the driver's seat. Rotating the
lever on the left side of the driver's seatback increases or
decreases the lumbar support.
Seatback Releases Ð Bench Seat
The seatback is equipped with inertia latching mecha-
nisms that automatically lock and prevent the seatback
from folding forward during periods of high decelera-
tion, such as hard braking.
This type of latch mechanism eliminates the need to
actuate a release lever to fold the seat forward. In some
situations, such as when parked on a steep hill, the inertia
latch may lock and manual release of the lock will be
necessary.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 63
3