2004 Citroen C2 compression

Downloaded from www.Manualslib.com manuals search engine 63
ENGINE
ENGINE SPECIFICATIONS
Engines: HFX KFV KFW KFU
Petrol
All types
1.1i
1.4i1.4i 16V
Vehicle
Emission standardEngine typeCubic capacity (cc)
Bore / StrokeCompression ratio
Power ISO or EEC KW rpm
Power DIN (HP rpm)
Torque ISO or EEC
(m.daN rpm)C2/C3BERLINGO IIC2/C3/C3 Pluriel Xsara II/Berlingo II C3
L4/IFL5 L4/W4 L4/IFL5/INF K’/L4/W4/IFL5 IFL5/L4
HFXKFVKFWKFU
1124 1360
72/69 75/77
10,5/1 11/1
44550044,15500545400555500655250
615500605500 755400 755500 905250
943400 943300 123400 122800 13,33250
943500

Downloaded from www.Manualslib.com manuals search engine 64
ENGINEENGINE SPECIFICATIONS
Engines: NFV NFU 6FZ RFN RFS
Petrol
All types
1.6i 16V 2.0i 16V1.8i 16V
Vehicle
Emission standard
Engine typeCubic capacity (cc)
Bore / StrokeCompression ratio
Power ISO or EEC KW rpm
Power DIN (HP rpm)
Torque ISO or EEC
(m.daN rpm)Xsara Picasso C2/C3 Xsara Xsara Picasso Xsara II Xsara II
C3 Pluriel Xsara Picasso
Berlingo II
L4L4/IFL5 IFL5 IFL4/IFL5 L4
NFV NFU 6FZ RFN RFS
1587 1749 1998
78,5/82 78/82 82,7/81,4 85/86
10,5/1 11/1 10,8/1 10,8/1
705700805800 855500 1006000 1206000
955700 1105800 1155500 1366000 1636000
13,53000 14,74000 164000 194100 19,35000
1.6i

Downloaded from www.Manualslib.com manuals search engine 65
ENGINE
ENGINE SPECIFICATIONS
Engines: 8HX 8HW 8HZ 8HV 8HY
Diesel
All types
1.4 HDi
1.4 HDi 16V
Vehicle
Emission standardEngine typeCubic capacity (cc)
Bore / StrokeCompression ratio
Power ISO or EEC KW rpm
Power DIN (HP rpm)
Torque ISO or EEC
(m.daN rpm)C2/C3/C3 PlurielC3Xsara C3
L4/IFL5 L4
8HX8HW8HZ8HV8HY
1398
73/82 73,5/82 73/82
17,9/1 18,25/1
504000664000
704000694000 924000
152000 162000 202000

Downloaded from www.Manualslib.com manuals search engine 66
ENGINEENGINE SPECIFICATIONS
Engines: 9HZ 9HY WJY RHU RHZ
Diesel
All types
1.6 HDi 16V 2.0 HDi1.9 D
Vehicle
Emission standard
Engine typeCubic capacity (cc)
Bore / StrokeCompression ratio
Power ISO or EEC KW rpm
Power DIN (HP rpm)
Torque ISO or EEC
(m.daN rpm)Xsara II
Xsara Picasso Xsara II Berlingo II Xsara Picasso Xsara II
Berlingo II
L4
9HZ 9HY WJY RHY RHZ
1560 1868 1997
88,3/75 82,2/88 85/88
18/1 23/1 17,6/1
804000514600 664000 804000
1104000 714600 904000 1094000
24,52000 12,52500 10,52500 20,51900 251750

Downloaded from www.Manualslib.com manuals search engine 135
ENGINE
AUXILIARY EQUIPMENT DRIVE BELT
Engines: 8HX 8HW
With compressor and alternator .
B1BP2MKCB1BP2MJD
Tools.
[1]
Pliers for removing plastic pegs: 7504T
[2]Tensioner roller compression lever:().0194.E
[3]Tensioner roller setting peg Ø4 mm: ().0194.F
Removing.
Disconnect the battery negative cable.
Raise and support the vehicle, wheels hanging.
Remove the front RH wheel.
Move aside the splashshield, using tool
[1].
IMPERATIVE: In the case of belt reuse, mark the
direction of rotation of the belt. If the index on the
tensioner roller is outside the marks, change
the auxiliary equipment drive belt.
The alternator (1).
The aircon compressor (2).
Detension the auxiliary belt tensioner roller, using tool [2].
Position the peg [3].
Remove the auxiliary drive belt.
C2 C3 C3 PLURIEL

Downloaded from www.Manualslib.com manuals search engine 137
ENGINE
XSARA
AUXILIARY EQUIPMENT DRIVE BELT 2002
Tools.
[1]
Dynamic tensioner compression lever: ().0188.Z
[2]Peg for dynamic tensioner roller: ().0194.F
Removing.
IMPERATIVE: Respect the safety and cleanliness requirements specific to high pressure
diesel injection engines (HDi).
Remove:
The front RH wheel.
The underengine sounddeadening.
The splashshield.
WARNING: Mark the direction of fitting of the accessories drive belt, if it is to be reused.
Compress the tensioner roller (1)by acting at «a»(clockwise), using tool [1].
Peg at «b», using tool [2].
Keeping the tensioner roller (1)compressed, remove the accessories drive belt.
IMPERATIVE: Check that the rollers (1) and (2) can turn freely (without play and without
tight spots).B1BP2VZD
Engine: 8HZ

Downloaded from www.Manualslib.com manuals search engine 140
ENGINE
140
B1BP2Z6DB1BP2ZCD
AUXILIARY EQUIPMENT DRIVE BELT
Engines: 9HZ 9HY
Tools.
[1]
Dynamic tensioner compression lever: ().0188.Z
[2]Peg for dynamic tensioner roller: ().0194.F
Removing.
Remove the front RH wheel, the underengine sounddeadening and the splashshield.
Vehicle with air conditioning.WARNING:Mark the direction of fitting of the accessories drive belt, if it is to be reused.
Compress the tensioner roller (1)by acting at «a»(clockwise), using tool [1].
Peg at «b», using tool [2].
Remove the accessories drive belt.
IMPERATIVE:Check that the rollers (1) and (2) can turn freely (without play and without tight spots).
Refitting.
WARNING:
Belt to be reused, mark the direction of fitting of the belt.
Refit the accessories drive belt.
Compress the tensioner roller
(1)by acting at «a»(clockwise), using tool [1].
Remove tool [2].
IMPERATIVE: Make sure the belt is correctly positioned in the grooves of the various pulleys.
Complete the refitting in the opposite order to removal.
XSARA PICASSO

Downloaded from www.Manualslib.com manuals search engine 141
ENGINE
XSARA XSARA PICASSO
A UXILIARY EQUIPMENT DRIVE BELT 2002
Engines: RHY RHZ
Without air conditioning.
B1BP1YKD
Tools.
[1]Belt tension adjusting square: ().0188 J2
[2] Ø 4 mmpeg: ().0188.Q1
[3] Ø 2 mmpeg: ().0188.Q2
[4]Dynamic tensioner compression lever:().0188.Z
Removal.
Reuse of belt.
WARNING: Mark the direction the belt was fiited in case of reuse of the same
belt.
Compress the tensioner roller (2)by action at «a»(in anticlockwise direction),
tool [4].
Keep the tensioner roller (2)compressed and remove the belt.
No reuse of belt. Compress the tensioner roller (2)by action at «a»(in anticlockwise direction),
tool [4].
Peg using tool [2], at «b».
Keep the tensioner roller (2)compressed and remove the belt.
Loosen the screw (1).