2004 Citroen C2 Filter

Downloaded from www.Manualslib.com manuals search engine 41
GENERAL
ALL TYPES
LUBRICANTS TOTAL recommended oils
Recommendations.
ESSENTIAL: To preserve engine performances, all engines fitted in CITROEN vehicles must be lubricated with high quality oils
(synthan
dic or semisynthandic).
CITROËN
engines are lubricated at the factory with TOTALoil of grade S.A.E.5W30.TOTALoil of grade S.A.E.5W30allows improved fuel economies (approx 2.5%).
The oil
5W30is used only for the following engines (Year 2003):
XU10 J4RS: XSARA VTS 2.0i 16V (3door) SOFIM:RELAY 2.8 TDi and 2.8 HDi. HDi:With particle filter (FAP). DV4 TED4: CITROËN C3 1.4 HDi 16V EW 12J4:CITROËN C8 2.2i.
WARNING: CITROËNengines prior to model year 2000do not have to be lubricated with oils adhering to the norms ACEA AI98 and API SJ/CF ECor current norms ACEA A5/B5
Denomination of TOTALoils according to corntry of markanding:TOTAL ACTIVA(France only).TOTAL QUARTZ(outside France).

Downloaded from www.Manualslib.com manuals search engine 42
GENERAL
Year
Year 2003
Petrol and
dual fuel petrol / LPG enginesA3 or A5 5 (*)
SJ or SL
CF
B3 or B5 (*)
Diesel engines
Types of engine concernedNorms to be observed for engine oils (year 2003)
ACEA norms API norms Récapitulation
ALL TYPES
LUBRICANTS TOTAL recommended oils
TOTAL ACTIVATRAC TOTAL QUARTZ FUTUR 9000 (*) TOTAL ACTIVA FUTUR 9000 (*) TOTAL ACTIVA 9000
TOTAL QUARTZ 90005W40A3 / B3
SL / CF
SJ / CF A5 / B5
A3 / B3 5W30
10W40 S.A.E. norms Blended oils for all engines (petrol, diesel and dual fuel petrol / LPG engines).
ACEA norms API norms
(*) It is essential not to use engine oils respecting these norms for the following enginetypes: XU10 J4RS , SOFIM 2.8 TDi
and SOFIM 2.8 HDi , HDi with particle filter (FAP), EW 12 J4, DV4 TED4.
Classes and grades of TOTAL recommended engine oils.
Oils markanded in each country are adapted to the local climatic conditions.
(*) Blended oils for all engines, permitting fuel economy.

Downloaded from www.Manualslib.com manuals search engine 44
GENERAL
LUBRICANTS TOTAL recommended oils
ALL TYPES
TOTAL ACTIVA QUARTZ
Semisynthetic 7000
Synthetic 9000
0W40
cold
contries5W30 5W40 10W4015W50
hot
countries Engine types
XU10 J4RS (Xsara VTS 2.0i 16V) X
XX EW 12 J4 (C8 2.2i 16V)
Other petrol engines
HDi engines with FAP (*)Other HDi engines
SOFIM 2.8 TDi and 2.8 HDi (RELAY)DV4 TED4 (C3 1.4 16V HDi)
Indirect injection diesel engines
Petrol engines
Diesel enginesOil usage table
X
X
XXXX
XXX
XXX
XX
XXX
XXX
XXX
XXX
(*) = Particle filter
X

Downloaded from www.Manualslib.com manuals search engine 148
ENGINECHECKING AND SETTING THE VALVE TIMING
Engines: HFX KFV NFU
B1BP2M7CB1BP2M9CB1BP2M8C
Tools.
[1]
Engine flywheel peg: 4507T.A
[2]Camshaft pulley peg : 4507T.B
[3a]Camshaft peg: 4533TA.C1
[3b] Camshaft peg: 4533TA.C2
[4]Dynamic tensioner roller pin: 4200T.H
[5]Belt retaining pin: 4533T.AD
[6]Pliers for removing plastic pins: 7504T
Checking the valve timing.
Engines:
HFX – KFV – NFU.
Raise and support the front RH side of the vehicle.
Disconnect the battery positive terminal.
Engage 5th gear.
Remove the oil filter
(1).
Engines:HFX – KFV.
Remove: The timing top casing (2).
Turn the wheel to rotate the engine (normal direction of rotation).
Peg the camshaft pulley, using tool [2].
C2 C3 C3 PLURIEL

Downloaded from www.Manualslib.com manuals search engine 150
ENGINECHECKING AND SETTING THE VALVE TIMING
Engines: HFX KFV
B1BP2MBCB1BP2M9CB1BP2MDC
Setting the timing.Preliminary operation.Lift and support the vehicle, wheels hanging.
Disconnect the battery.
Remove:
The front RH wheel.
The splashshield, using tool
[6].
The accessories belt (See corresponding operation).
The crankshaft pulley.
The oil filter.
Place a jack under the engine, peg the engine.
Removing.
Engines:HFX – KFV.Turn the engine by means of screw (1)(normal direction of rotation).
Remove the timing casings.Peg the camshaft pinion, using tool
[2].
Peg the flywheel, using tool [1].
Remove:
The fixing screws
(2).
The upper engine support (3).
B1BP2MCC
C2 C3 C3 PLURIEL

Downloaded from www.Manualslib.com manuals search engine ENGINE
165
CHECKING AND SETTING THE VALVE TIMING
Engine: KFU
Tools.
[1]
Flywheel peg :4507T
[2]Camshaft peg: 4533TA.C1
[3]Crankshaft setting peg: ().0194.A
Checks.
Raise and support the vehicle, front wheels hanging.
Disconnect the battery.Remove:
The oil filter. The engine cover.
The upper timing cover
(1).
The sparking plugs, to ease rotation of the engine.
Rotate the engine by means of the crankshaft screw
(never turn the engine backwards).
B1BP2ZJD
C3

Downloaded from www.Manualslib.com manuals search engine 166
ENGINECHECKING AND SETTING THE VALVE TIMING
Engine: KFU
B1BP2MBC
Position the tools [3]and [2].
Peg the flywheel, using tool
[1].
NOTE:If the setting is not correct, recommence the operation.
Remove the pegs
[2]and [3].
Refit :
The oil filter.
The timing cover
(1).
The engine cover.
Reconnect the battery.
Lower the vehicle.
Perform the operations that are necessary following a reconnection of the battery.
B1BP2ZTC
C3

Downloaded from www.Manualslib.com manuals search engine ENGINE
167
CHECKING AND SETTING THE VALVE TIMING
Engine: KFU
Tools.
[1]
Flywheel setting peg: 4507T
[2]Engine support crossmember:
[3]Crankshaft setting peg: ().0194.A
[4]Camshaft peg: 4533TA.C1
[5]Belt retaining pin: 4533T.AD
Removing.
Raise and support the vehicle, front wheels hanging.
Disconnect the battery.Remove:
The front RH wheel.
The front RH splashshield. The engine cover.
The accessories drive belt
(see corresponding operation).
The crankshaft pulley. The oil filter.
Remove the upper timing cover
(1).
B1BP2ZJD
C3