2004 CHEVROLET S10 service interval

[x] Cancel search: service interval

Page 318 of 422

CHEVROLET S10 2004  Owners Manual Tire Inspection and Rotation
Tires should be rotated every 5,000 to 8,000 miles
(8 000 to 13 000 km).
Any time you notice unusual wear, rotate your tires as
soon as possible and check wheel alignment.

Page 360 of 422

CHEVROLET S10 2004  Owners Manual Part A: Scheduled Maintenance
Services
In this part are scheduled maintenance services which
are to be performed at the mileage intervals specified.
Using Your Maintenance Schedule
We at General Moto

Page 361 of 422

CHEVROLET S10 2004  Owners Manual Selecting the Right Schedule
First you will need to decide which of the two schedules
is right for your vehicle. Here is how to decide which
schedule to follow:
Short Trip/City De�nition
Follow the Sh

Page 362 of 422

CHEVROLET S10 2004  Owners Manual Long Trip/Highway De�nition
Follow this scheduled maintenanceonlyif none of the
conditions from the Short Trip/City Scheduled
Maintenance are true. Do not use this schedule if the
vehicle is used for

Page 363 of 422

CHEVROLET S10 2004  Owners Manual Footnotes
†The U.S. Environmental Protection Agency or the
California Air Resources Board has determined that the
failure to perform this maintenance item will not nullify
the emission warranty or l

Page 373 of 422

CHEVROLET S10 2004  Owners Manual 99,000 Miles (165 000 km)
❑Change engine oil and filter (or every 3 months,
whichever occurs first).An Emission Control Service.
❑Lubricate chassis components (or every 3 months,
whichever occur

Page 374 of 422

CHEVROLET S10 2004  Owners Manual Footnotes
†The U.S. Environmental Protection Agency or the
California Air Resources Board has determined that the
failure to perform this maintenance item will not nullify
the emission warranty or l

Page 381 of 422

CHEVROLET S10 2004  Owners Manual Part B: Owner Checks and Services
Listed in this part are owner checks and services
which should be performed at the intervals specified to
help ensure the safety, dependability and emission
control
Page:   1-8 9-16 next >