2004 CHEVROLET EXPRESS CARGO VAN engine oil

[x] Cancel search: engine oil

Page 253 of 406

CHEVROLET EXPRESS CARGO VAN 2004 1.G Owners Manual Service............................................................5-3
Doing Your Own Service Work.........................5-4
Adding Equipment to the Outside of
Your Vehicle..........................

Page 262 of 406

CHEVROLET EXPRESS CARGO VAN 2004 1.G Owners Manual Checking Things Under
the Hood
{CAUTION:
Things that burn can get on hot engine parts
and start a �re. These include liquids like fuel,
oil, coolant, brake �uid, windshield washer and
other �uids, and

Page 265 of 406

CHEVROLET EXPRESS CARGO VAN 2004 1.G Owners Manual A. Battery. SeeBattery on page 5-42.
B. Radiator Pressure Cap. SeeRadiator Pressure Cap
on page 5-25.
C. Coolant Recovery Tank. SeeCooling System on
page 5-28.
D. Transmission Fluid Dipstick. SeeAutom

Page 266 of 406

CHEVROLET EXPRESS CARGO VAN 2004 1.G Owners Manual When to Add Engine Oil
If the oil is at or below the cross-hatched area at the tip
of the dipstick, then you will need to add at least one
quart of oil. But you must use the right kind. This section
e

Page 268 of 406

CHEVROLET EXPRESS CARGO VAN 2004 1.G Owners Manual Notice:Use only engine oil identi�ed as meeting GM
Standard GM6094M and showing the American
Petroleum Institute Certi�ed For Gasoline Engines
starburst symbol. Failure to use the recommended oil
can

Page 269 of 406

CHEVROLET EXPRESS CARGO VAN 2004 1.G Owners Manual How to Reset the Change Engine Oil Light
The GM Oil Life System calculates when to change
your engine oil and �lter based on vehicle use. Anytime
your oil is changed, reset the system so it can
calcul

Page 270 of 406

CHEVROLET EXPRESS CARGO VAN 2004 1.G Owners Manual Engine Air Cleaner/Filter
SeeEngine Compartment
Overview on page 5-12for
the location of the
engine air cleaner/�lter and
change indicator
(if equipped).
When to Inspect the Engine Air
Cleaner/Filter

Page 271 of 406

CHEVROLET EXPRESS CARGO VAN 2004 1.G Owners Manual 2. Lift the �lter out of the engine air cleaner/�lter
housing. Care should be taken to dislodge as
little dirt as possible.
3. Clean the engine air cleaner/�lter housing.
4. Install the new engine air