How to Add Coolant to the Coolant
Recovery Tank
{CAUTION:
Adding only plain water to your cooling
system can be dangerous. Plain water, or
some other liquid such as alcohol, can boil
before the proper coolant mixture will. Your
vehicle’s coolant warning system is set for the
proper coolant mixture. With plain water or the
wrong mixture, your engine could get too hot
but you would not get the overheat warning.
Your engine could catch re and you or others
could be burned. Use a 50/50 mixture of clean,
drinkable water and DEX-COOL
®coolant.
Notice:In cold weather, water can freeze and crack
the engine, radiator, heater core and other parts.
Use the recommended coolant and the proper
coolant mixture.If you have not found a
problem yet, but the
coolant level is not at the
FULL COLD mark,
add a 50/50 mixture of
clean, drinkable waterand
DEX-COOL
®engine
coolant at the coolant
recovery tank. SeeEngine
Coolant on page 5-23
for more information.
{CAUTION:
You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot
enough. Do not spill coolant on a hot engine.
When the coolant in the coolant recovery tank is at the
FULL COLD mark, start your vehicle.
If the overheat warning continues, there is one more
thing you can try. You can add the proper coolant
mixture directly to the radiator, but be sure the cooling
system is cool before you do it.
5-30
Driving (cont.)
In Rain and on Wet Roads...........................4-17
Winter........................................................4-25
Driving On Grades..........................................4-45
Driving on Snow or Ice....................................4-26
Driving Through Deep Standing Water...............4-19
Driving Through Flowing Water.........................4-20
Driving with a Trailer.......................................4-43
Dual Automatic Climate Control System.............3-26
E
Electrical System
Add-On Equipment......................................5-91
Fuses and Circuit Breakers...........................5-92
Power Windows and Other Power Options......5-92
Removing the Rear Seat Cushion..................5-95
Emergency Trunk Release Handle.....................2-15
Emissions Inspection and Maintenance
Programs...................................................3-42
Engine
Air Cleaner/Filter.........................................5-18
Battery.......................................................5-40
Check and Service Engine Soon Light............3-40
Coolant......................................................5-23
Coolant Heater............................................2-24
Coolant Temperature Gage...........................3-40
Cooling System Inspection............................6-22
Engine Compartment Overview......................5-12Engine (cont.)
Exhaust.....................................................2-31
Oil .............................................................5-13
Overheating................................................5-26
Starting......................................................2-23
Engine Compartment Fuse Block......................5-92
Engine Coolant Level Check.............................6-17
Engine Cooling When Trailer Towing..................4-46
Engine Oil Additives........................................5-16
Engine Oil Level Check...................................6-17
Entry Lighting.................................................3-18
Erasing HomeLink
®Buttons..............................2-41
Event Data Records (EDR)................................ 7-9
Express-Down Window....................................2-17
Extender, Safety Belt.......................................1-26
Exterior Lamps...............................................3-14
Exterior Lighting Battery Saver..........................3-17
Exterior Lights................................................3-53
F
Filter
Engine Air Cleaner......................................5-18
Finding a PTY Station.....................................3-59
Finding a PTY Station (RDS and XM™).............3-66
Finding a Station....................................3-56, 3-64
Finish Care....................................................5-87
Finish Damage...............................................5-89
Flash-To-Pass.................................................. 3-9
5
