Page 73 of 200
71n
OverviewControlsMaintenanceRepairsDataIndex
Washer/wiper system/rain sensor
*
0Wipers retracted
1Intermittent mode or rain sensor
2Normal wipe
3Fast wipe
4Brief wipe
5Cleaning the windshield
6Special wash program
*
7Serrated dial for control of the wipe
interval or the sensitivity of the rain
sensor530de324
Retracted positionThe left wiper is partially concealed by
the hood. In order to bring the wipers to
roughly a vertical position, this is impor-
tant for changing the wiper blades or to
fold the wipers out during frosty
weather, for example:
>With the lever in position 1, switch off
the ignition as soon as the wipers
come to a stop.
If equipped with a rain sensor:
1. Switch on the wipers with the lever in
position 1, 2 or 4
2. When the wipers are approx. vertical,
switch the ignition off.
For changing the wiper blades, refer to
page 158.
Fold the wipers back down onto
the windshield before you turn the
ignition key to position 1 or 2 again. If
you do not, they could be damaged.<
Intermittent mode Not on vehicles with rain sensor.
You can set the wipe interval to four
stages with serrated dial 7.
In addition, the wipe interval is varied
automatically depending on road
speed. Rain sensor The rain sensor is positioned on the
windshield, directly in front of the inte-
rior rearview mirror.
To activate the rain sensor:
Move the lever to position 1 as of igni-
tion key position 1. The wipers travel
once across the windshield, regardless
of the weather conditions.
You can leave the lever permanently in
position 1. It is then only necessary to
activate the rain sensor as of ignition
key position 1.
To do this, turn serrated dial 7 briefly.
To adjust the sensitivity of the rain sen-
sor:
Turn serrated dial 7.
Deactivating the rain sensor:
Move lever to position 0.
Page 74 of 200
72n
Washer/wiper system/rain sensor
*
Deactivate the rain sensor when
passing through an automatic car
wash. Failure to do so could result in
damage caused by undesired wiper
activation.<
Normal wipe The system switches automatically to
intermittent mode when the vehicle is
stationary, not on vehicles with rain
sensor. Fast wipe The wipers operate at normal speed
when the vehicle is stationary, not on
vehicles with rain sensor. Cleaning the windshield The system sprays washer fluid against
the windshield and activates the wipers
for a brief period.
Special wash program
*
As with 5; several additional wash
cycles are carried out and the head-
lamps are cleaned
*.
This program is recommended after you
have driven on extremely dirty roads.
Cleaning headlamps
*
>With the special wash program 6
>With every actuation of cleaning the
windshield 5 when the vehicle's light-
ing is switched on, the headlamps
will be cleaned at appropriate inter-
vals. Do not use the washers if there
is any danger that the fluid will
freeze on the windshield. If you do so,
your vision could be obscured. There-
fore use antifreeze, refer to page 148.
Do not actuate washer systems when
the fluid reservoir is empty, as other-
wise the washer pump will be dam-
aged.<
Windshield washer nozzlesThe windshield washer jets are warmed
automatically when the ignition key is in
position 2.
Page 160 of 200
158n
Under the cargo floor cover in a pocket.
530us106
Front 1. Move the wiper to a fold-out posi-
tion, refer to page 71
2. Lift the wiper arm and press the
securing spring, refer to arrow
3. Pull the wiper blade off toward the
wiper arm
4. Insert the new blade and snap it into
place.
Fold the wipers back down onto
the windshield before you turn the
ignition key to position 1 or 2 again. If
you do not, they could be damaged.< 530de300
Rear 1. Hold the wiper blade on the window
and remove/unclip the wiper arm at
the articulated joint, refer to arrow
2. Insert a new wiper blade and press it
on/clip it into the wiper arm.
Use only wiper blades approved
by BMW.< 530de301
Onboard tool kit Windshield wiper blades
Page 197 of 200
Everything from A to Z
195n
OverviewControlsMaintenanceRepairsDataIndex
V
Valve
inserts 168
screw caps 168
Vehicle
battery 168
breaking-in 136
care, refer to Caring for
your vehicle brochure
loading 130
measurements, refer to
Dimensions 179
parking 65
storage, refer to Caring for
your vehicle brochure
washing, refer to Caring for
your vehicle brochure
weight 180
Vehicle jack 165
Vehicle Memory 63
Ventilation 106, 109
draft-free 108, 113
in rear 108
while parked 115
Viscosity 149
Voice command system 23
Voice control, refer to
separate Owner's Manual
Volume, cargo area 180W
Warning and indicator
lamps 19
Warning triangle 24
Warnings, refer to Check
Control 79
Warranty 10
refer also to Service and
Warranty Information
Booklet for US models or
Warranty and Service
Guide Booklet for
Canadian models
Warranty and Service Guide
Booklet for Canadian
models 152
Washer fluid 148
Washer fluid reservoir
content 181
refer to Windshield and
headlamp washer
system 148
Waste container, refer to
Ashtray 121
Water on roads, flooding 137
Wear indicators in the tires,
refer to Tire tread 144
Weights 180
Wheel and tire
combinations 144Wheelbase, refer to
Dimensions 179
Wheelslip control, DSC
Dynamic Stability
Control 94
Width, refer to
Dimensions 179
Windows
convenience operation 33
defrosting, refer to
Defrosting
windows 108, 111
Windshield washer fluid
tank 148
capacity, refer to Filling
capacities 181
Windshield washer system
washer fluid 148
washer/wiper system 71
Windshield wiper blades
care, refer to Caring for
your vehicle brochure
replacement 158
Windshield wipers, refer to
Wiper/washer system 71
Windshield, cleaning 72
Winter tires 145
changing 145
condition 143
storage 145
Wiper system 71Working in the engine
compartment 146
Wrenches, refer to Onboard
tool kit 158
X
xDrive 95
Xenon lamps, bulb
replacement 160
