Page 13 of 162
111Overview
General view, right
side1Toolkit (
b 85) under
the seat
2Display for engine oil level
(
b 86)
3Filler aperture
Engine oil (
b 87), under
seat
4Filler aperture, fuel tank
(
b 67)
5Battery compartment
(b 115)
6Front brake-fluid reservoir
(
b 91)
7Type plate on rear cross
pipe
8Vehicle identification
number on front right side
panel
9Rear brake-fluid reservoir
(b 92)
Page 108 of 162
Maintenance6106
Do not touch the glass of
new bulbs with your
fingers. Use a clean, dry cloth
when fitting. Dirt deposits, in
particular oil and grease,
interfere with heat radiation
from the bulb. This will result in
overheating and therefore
shorten the service life of the
bulbs.c
You will find an overview
of the types of screw
used on (
b 124).c
Replacing the low-beam
headlight bulb
During the work
described below, a
motorcycle that has been
parked unsafely can fall over.
Make sure that the motorcycle
is parked securely.cThe bulb is pressurised,
injuries may result if the
bulb is damaged.
Wear protective goggles and
gloves when changing
bulbs.c
To achieve better acces-
sibility, turn the handle-
bars to the right.c
• If necessary, switch off the
ignition.
• Loosen the cover 1 by
turning it anticlockwise and
remove it.• Pull off the connector 2.
• Remove the spring wire
brackets 3 from their detents
on the left and right and fold
them up.
Page 129 of 162
8127
Technical data
Engine Engine
Type 4-cylinder in-line engine, fitted crossways,
inclined 55
o
Displacement 1,157 cm
3
Bore/stroke 79/59 mm
Compression ratio 13 : 1
Power output
Greatest rated power
- at engine speed123 / 74 kW
10,250 / 7,000 rpm
Torque
Max. torque
- at engine speed 130 / 110 Nm
8,250 / 5,250 rpm
Engine speeds
Engine speed, maximum
Neutral speed11,000 rpm
1,150 +
50 rpm
Consumption
Fuel consumption at constant 90 km/h 4.7 l/100 km
Fuel consumption at constant 120 km/h 5.5 l/100 km
Maximum oil consumption 1 l/1,000 km
