2004 BMW M3 check oil

BMW Maintenance Programs -
2004 M3
Maintenance Programs are a benefit designed
to help reduce the cost of scheduled and
unscheduled maintenance.
2004 M3 vehicles purchased from any
Authorized BMW center in the United States or
Puerto Rico are covered by Full Maintenance
for 48 months or 50,000 miles, whichever
occurs first. Coverage begins on the date of
first retail sale or the date the vehicle is first
placed in service as a demonstrator or
company vehicle, whichever is earlier.
Any authorized BMW center in the United
States or Puerto Rico will perform the sched-
uled or additional maintenance services on
your vehicle at no expense to you. The
maintenance schedule intervals are based on
normal driving conditions and operation.
Should you request more frequent mainte-
nance service, the cost of these services
will not be covered by the Maintenance
Program.
Coverage
Full Maintenance covers all factory recom-
mended maintenance, as determined by the
service interval indicator. Additional items that
need replacement due to normal wear and
tear, and that are not covered by the original
New Vehicle Limited Warranty - such as brake
pads, brake rotors, and wiper blade inserts -
are included, provided wear and tear
exceeds BMW specifications. Any adjust-
ments required due to normal operating
conditions are also included. See pages 5-8
of this statement for additional information.
Maintenance Intervals
Time intervals should be followed using the
maintenance interval as indicated by the BMW
Service Indicator lights on the check control
panel in the dashboard.This BMW Service and Warranty Information
Statement should be presented to your BMW
center when maintenance is required. Your
BMW center will stamp this book documenting
the services or maintenance performed.
Exclusions from coverage
– Items reimbursable under your New Vehicle
Limited Warranty.
– Gasoline and gasoline additive.
– Windshield washer additive (except when
in conjunction with scheduled mainte-
nance).
– Tires, wheel alignment, tire balance and
rotation.
– Wear and tear of soft trim items, such as:
seats, carpets, moldings, headliner, door
panels and all chrome trim.
– Damage detected when performing the rust
perforation inspection.
– Damage which results from negligence,
improper operation of the vehicle, wear and
tear or deterioration due to driving habits or
conditions, improper repair, environmental
influences, flood, accident or fire damage,
road salt corrosion, alteration, installation of
non-BMW accessories, or use of improper,
poor quality or contaminated fuel.
– Altered or unreadable Vehicle Identification
Number (VIN) or odometer irregularities or
vehicles where the true mileage cannot be
determined.
– Maintenance or repair after the vehicle is
deemed a total loss.
– Maintenance or repairs performed by other
than an Authorized BMW center within the
United States or Puerto Rico.
– Vehicles used in competitive events.
– Oil changes performed outside the
recommended maintenance intervals as
indicated by the Service Interval Indicator.
1

3 The performance of certain subsequent
maintenance elements, as required by the
BMW New Vehicle Limited Warranty, will be
specified at intervals computed by the BMW
service interval indicator as follows:
– Oil Service: Engine oil changed with the
engine at operating temperature. Note:
change oil at least once a year. Your BMW is
factory-equipped with a newly-developed
synthetic engine oil. At the time of the
printing of this booklet the only approved
engine oils are:
Castrol TWS Motorsport SAE 10W-60
Synthetic, or Castrol Formula RS 10W-60
Synthetic (BMW part number 07 51 0 009
420). BMW is evaluating various synthetic
oils for inclusion in our list of recommended
motor oils.
For the most current list of synthetic oils,
please contact your BMW center, or call
BMW of North America at 1-800-831-1117.
You can also obtain this information from
our website, www.bmwusa.com/.
It is recommended to check engine oil level
whenever fuel is added to the vehicle.
If you need to add oil between oil changes
and are unable to obtain BMW High
Performance Synthetic Oil, Mobil 1 or
another special oil on the list, use a
synthetic oil with an API rating of SJ or
higher.
– Inspection I: Major vehicle maintenance
as specified in the following pages under
Inspection I.
– Inspection II: Additional major vehicle
maintenance as specified in the following
pages under Inspection II.
The following maintenance elements must
be performed at the mileage/time stated
(time intervals begin from the vehicle’s
production date):
– Brake Fluid Service: Change brake fluid
every two years.– Oxygen Sensor Service: The oxygen sensor
deteriorates strictly on a mileage basis and
must therefore be replaced every 100,000
miles to maximize vehicle fuel economy
and minimize exhaust pollution. The
replacement of the oxygen sensor is
required under the terms of the appli-
cable BMW emission system warranties.
– Spark Plug Service: Replace spark plugs
every Inspection II). Your BMW is equipped
with platinum-tipped spark plugs. These
allow a longer service life than conven-
tional spark plugs.
The engine coolant has a lifetime rating and
does not need to be changed.
For your convenience, you may also wish to
have your BMW center perform any necessary
operations to fulfill any state inspection
requirements in your area concurrent with the
maintenance elements specified above during
other repairs.
Make sure that confirmation of maintenance
work is always entered in this Service and
Warranty Information Statement. You may need
this for any warranty claims that become
necessary, and later on as evidence that your
car has been given the correct and regular
maintenance that justifies its resale or trade-in
value.
BMW has applied the most modern techno-
logical advances not only to the design and
production of your vehicle, but also to
computing of the optimum maintenance
interval for your type of operations and
driving style. Your BMW center has made a
substantial investment in unique BMW
special service tools to enable his BMW
factory trained service technicians to perform
quality repairs on your BMW in minimal time.
He/she looks forward to serving your every
service need and to help maximize your
satisfaction with your BMW, its longevity, and
resale value.

5
1200 Mile Service
Engine Oil Service
Engine Compartment
Change oil and oil filter while engine is at normal operating temperature. 
Use only Castrol TWS Motorsport SAE 10W-60 Synthetic Oil or Castrol
Formula RS 10W-60 Synthetic oil, BMW p/n 07 51 0 009 420.
Reset service interval indicator. 
Replace microfilter. 
Check overall thickness of rear disc brake pads using special tool.rear
If replacement is necessary: Examine brake disc surfaces. Clean brake pad
contact points in calipers. Grease wheel centering hubs.
Check thickness of parking brake linings only when replacing rear pads.
Remove and install front disc brake pads, check overall thickness. 
Examine brake disc surfaces. Clean brake pad contact points in calipers.
Grease wheel centering hubs.
Check parking brake actuation. Adjust if necessary. 
Body
Convertible: Lubricate convertible top sliding linkage covers. 
M3
Read out diagnostic system.
Change oil and filter while engine is at normal operating temperature. 
Use only Castrol TWS Motorsport SAE 10W-60 Synthetic Oil,
BMW p/n 07 51 0 009 420.
Replace transmission fluid. 
Replace differential oil. 
Check all warning/indicator lights, check control. 
Road test with check of brakes, suspension, steering,
clutch/manual transmission. 

Inspection I
Only those items of inspection work which apply to your vehicle will be performed. This list is
subject to amendment.
Undercarriage
6M3
Change oil and oil filter while engine is at normal operating temperature. 
Use only Castrol TWS Motorspor t SAE 10W-60 Synthetic, or Castrol Formula
RS 10W-60 Synthetic oil, BMW p/n 07 51 0 009 420.
Check transmission for leaks. 
Check rear axle for leaks. 
Half-shafts: Check for leaks at flexible boots. 
Visually check fuel tank, lines and connections for leaks. 
Check condition, position, and mounting of exhaust system. Examine for leaks. 
Check power steering system for leaks. Check power steering fluid level; 
add fluid if necessary.
Check steering for absence of play, condition of suspension track rods, 
front axle joints, steering linkage and joint disc.
Check overall thickness of rear disc brake pads using special tool.rear
If replacement is necessary: Examine brake disc surfaces. Clean brake pad
contact points in calipers. Grease wheel centering hubs. Check thickness
of parking brake linings only when replacing rear brake pads.
Remove and install front disc brake pads, check overall thickness. Examine
disc surfaces. Clean brake pad contact points in calipers. Grease wheel
centering hubs.
Check brake system connections and lines for leaks, damage 
and incorrect positioning.
Check parking brake actuation. Adjust if necessary. 
Check all tire pressures (including spare). Correct if necessary. 
Check condition of tires (outer surface [left/right]), tread wear and pattern;
in case of uneven tread wear, readjust wheel alignment if requested
(invoice separately).
Inspect entire body according to terms of rust performation limited warranty. 
(Must be performed at least every two years).
Engine Compartment
Read out diagnostic system. 
Check valve settings. Adjust if needed. 
Check engine cooling system/heater hose connections for leaks. 
Check coolant level and antifreeze protection level. Add coolant if required.
Check windshield washer fluid level and antifreeze protection. 
Fill up and/or correct if required.
Check air conditioner for operation. 
Replace microfilter. (Note: reduce replacement interval in dusty 
operating conditions.)
Reset service interval indicator.

M3
Replace air cleaner element. (Note: Reduce replacement interval in 
dusty operating conditions).
Replace spark plugs. 
Undercarriage
Replace transmission fluid. 
Replace differential oil. 
Inspection II
Includes all items listed under Inspection I, and the following checks
and maintenance operations.
Engine Compartment
8
Brake Fluid Service
Replace brake fluid every 2 years (time interval begins from the 
vehicle’s production date).
Oxygen Sensor Service
Replace Oxygen Sensor every 100,000 miles. 
M-Mobility System Service
Replace sealant cartridge every 3 years.