2004 BMW M3 COUPE sensor

69
Shifting gears with shift paddles on
steering wheel:
>To upshift, briefly pull the right pad-
dle +
>To downshift, briefly pull the left pad-
dle –.
Shift paddles with various widths
matched to the shape of your
hand are available from your BMW cen-
ter.<
Shifting gears with selector lever:
>To upshift, pull the selector lever
backward in the '+' direction
>To downshift, push the selector lever
in the '–' direction.
No automatic upshifting is carried out in
the sequential mode.
You accelerate from higher gears, e.g.
during passing, by manually downshift-
ing.
In the following situations the
SMG Drivelogic in the sequential mode
assists you:
>Upshifts and downshifts are only exe-
cuted at appropriate combinations of
engine rpm and vehicle speed. For
instance, downshifts that would
result in excessive engine speed are
not executed
>During a stop the gearbox is auto-
matically downshifted into the first
gear so that, e.g. before a traffic light,
it is only necessary to accelerate to
continue driving
>As speed diminishes, the gearbox
downshifts automatically, without you
taking any action, just before the
vehicle slows to below each gear's
minimum speed.D - Automated modeEach time the engine is started, the
automated mode is activated as soon
as you move the selector lever into the
forward driving position.
In the automated mode all forward
gears are shifted automatically.To switch from sequential to automated
mode: tap the selector lever to the right
toward 'D'. Watch the display in the
instrument cluster, refer to page 68.
For rapid acceleration, e.g. during
passing, depress the accelerator pedal
completely – kickdown. The gearbox
now downshifts depending on the
selected driving program.
Even in the automated mode, you can
help specify the shifting point: if a gear-
dependent minimum speed is
exceeded, you can upshift by slowly
reducing pressure on the accelerator
pedal. In the process, the respective
driving situation is detected by sensors
and taken into account.
Sequential M gearbox with Drivelogic*
OverviewControlsMaintenanceRepairsDataIndex

73
Washer/wiper system/Rain sensor*0Wipers retracted
1Intermittent operation or rain sensor
2Normal wiper speed
3Fast wiper speed
4Brief wipe
5Rotary dial for control of the wipe
interval or the sensitivity of the rain
sensorIntermittent modeNot on vehicles with rain sensor.
You can set the wipe interval at four
stages with rotary dial 5. In addition, the
wipe interval is varied automatically
depending on road speed.
Rain sensor*The rain sensor is positioned on the
windshield, directly behind the interior
rearview mirror.
To activate the rain sensor:
>With the ignition key in position 1 or
higher, move the lever to position 1.
The wipers travel once across the
windshield, regardless of the weather
>You can leave the lever permanently
in position 1. It is then only necessary
to activate the rain sensor when the
ignition key in position 1 or higher.
Activate by briefly turning rotary
dial 5.
To adjust the sensitivity of the rain sen-
sor: turn rotary dial 5.
To deactivate the rain sensor: put lever
in position 0.
Turn the rain sensor off in auto-
matic car washes. Failure to do so
could result in damage caused by
undesired wiper activation. ers switch automatically to intermittent
wipe – not on vehicles with rain sensor.
Fast wiper speedWhen the vehicle is stationary, the wip-
ers operate at normal speed – not on
vehicles with rain sensor.
OverviewControlsMaintenanceRepairsDataIndex

74
0Wipers retracted
1Clean windshield and headlampsClean windshield and headlamps*
Do not use the washers if there is
any danger that the fluid will
freeze on the windshield, as your vision
could be obscured. Always use a wind-
shield washer antifreeze in cold
weather. Refer to page 122.
Do not use the washers when the reser-
voir is empty. This could cause damage
to the washer pump.<
The system sprays washer fluid against
the windshield and activates the wipers
for a brief period.
When the vehicle's lighting system is
switched on, the headlamps will also be
cleaned at reasonable intervals.Windshield washer nozzlesThe windshield washer jets are warmed
automatically when the ignition key is in
position 2.
Cruise controlStarting at about 20 mph / 30 km/h, you
can maintain and store any vehicle
speed that you specify.
The cruise control is operational when-
ever the engine is running and the sys-
tem has been activated.To activate the systemIn ignition key position 2:
Press the button in the steering wheel.
The indicator lamp in the instrument
cluster comes on, refer to page 20. You
can now use the cruise control.
Do not use cruise control on twist-
ing roads, when high traffic den-
sity prevents driving at a constant
speed, or when the road surface is slick
– snow, rain, ice – or loose – rocks or
gravel, sand. until the indicator lamp in the instru-
ment cluster goes out.
Cruise control is also deactivated when
the ignition key is in position 0.
Washer/wiper system/Rain sensor*

82Technology for safety and driving convenience
Park Distance Control (PDC)*The conceptPDC assists you when you back into a
parking space. Acoustic signals alert
you to the momentary distance to an
object behind your vehicle. To do this,
four ultrasonic sensors in the rear
bumper measure the distance to the
nearest object. The range for the sen-
sors located at both rear corners ends
approx. 2 ft/60 cm behind the bumpers.
The range for the two middle sensors is
slightly less than 5 ft/1.50 m.
PDC is a parking aid that can
identify objects if they are
approached slowly, as is generally the
case when parking. Avoid driving
towards objects rapidly; due to underly-
ing physical principles, the system may
otherwise alert you too late for you to
take evasive steps.<
The system starts to operate automati-
cally approx. one second after you shift
into Reverse or move the selector lever
into the R position with the ignition key
in position 2.
Let this short period elapse before
driving backwards.<
PDC is deactivated when you shift back
out of Reverse.
You can have a signal set to con-
firm that the PDC has been acti-
vated. The signal then sounds when
you shift into Reverse or move the
selector lever into the R position. indicated by a tone sounding at various
intervals. As the distance between vehi-
cle and object decreases, the intervals
between the tones become shorter. A
continuous tone indicates the pres-
ence of an object less than 1 ft/30 cm
away.
The warning signal is canceled after
approx. three seconds if the distance to
the object remains constant during this
time – if you are moving parallel to
a wall, for instance.
System malfunctions will be indicated
by a continuous high-pitched tone
when the system is activated the first
time. Please have your BMW center
resolve the problem.
PDC does not replace the driver's
personal responsibility for evaluat-
ing the distance between the vehicle
and any objects. Even when sensors
are involved, there is a blind spot in
which objects cannot be detected. This
applies especially in those cases where
the system approaches the physical
limits of ultrasonic measurement, as
occurs with tow bars and trailer cou-
plings, and in the vicinity of thin or
wedge-shaped objects. Moreover, low
objects that have already been
detected – such as a curb edge – can
disappear out of the detection range of
the sensors before a continuous tone
sounds.
Loud sources of sound from outside or
inside the vehicle could drown out the
PDC signal tone.<
Keep the sensors clean and free
of ice or snow in order to ensure
that they will continue to operate effec-
tively.
Do not apply high pressure spray to the
sensors for a prolonged period of time.
Always maintain a distance of more
than 4 in/10 cm.<

88Lamps
Parking lamps/Low beamsParking lamps
The front, rear and side vehicle
lighting is switched on. You can
use this to signal the position of
the vehicle when it is parked. For light-
ing on one side for parking as an addi-
tional feature, refer to page 89.
Low beams
When you switch the ignition off
with the low-beam headlamps
on, only the parking lamps will
remain on.
Follow me home lampsWhen you activate the headlamp
flasher after parking the vehicle and
switching off the lights, the low beams
will come on for a brief period.
You can also have this function
deactivated.<
LIGHTS ON warningWhenever you open the driver's door
after having turned the ignition key to
position 0, you will hear an acoustic
signal for a few seconds to remind you
that the lamps have not been switched
off.Daytime driving lamps*If you desire, the light switch can be left
in the low-beam position: when the
ignition is switched off, the external
lighting is also switched off.
When required, switch on the parking
lamps as usual as described under
Parking lamps.
You can have the activation set-
tings for the daytime driving lamps
programmed on your vehicle. When the switch is in this posi-
tion the system automatically
responds to changes in ambient
light – in tunnels, at dusk, etc. – and in
the event of rain and snow – by switch-
ing the low beams on or off.
The vehicle's external lamps
remain on constantly when you
switch on the front fog lamps after the
headlamps have come on automati-
cally.<
Automatic headlamp control can-
not serve as a substitute for your
personal judgement in determining
when the lamps should be switched on.
For example, the sensors are not able
to detect fog. In such situations switch
on the lamp manually, as otherwise a
safety hazard will result.<
You can have the sensitivity of
your vehicle's automatic head-
lamp control adjusted.<

93
1Air onto the windshield and the side
windows
2Air for the upper body area95
3Air to the footwell
4Interior temperature sensor – please
keep clear and unobstructed
5Outside air/Automatic recirculated-
air control (AUC)/Recirculated
air95
6Automatic air distribution and
supply94
7Individual air distribution94
8Temperature94
9Display for temperature and air
supply94
10 Air supply/Blower94
11 To defrost windows and remove
condensation94
12 Air conditioning94
13 Rear window defroster95Automatic climate control
OverviewControlsMaintenanceRepairsDataIndex

Everything from A to Z
161
Interior motion sensor 38
switching off 32, 39
Interior rearview mirror
automatic dimming
feature 52
Interior temperature
adjusting 94
Intermittent
mode, wipers 73
Interval
display, service 78
J
Jump-starting 143
K
Key Memory 60
Keys 30
with remote control 30
L
Lamp defect 133
Lamps and bulbs 133
Lashing down loads, refer to
Cargo loading 104
Lashing eyelets, refer to
Securing cargo 105
Lashing fittings, refer to
Securing cargo 105
LATCH child-restraint
mounting system 58Leather care, refer to the
Caring for your vehicle
brochure
LEDs light-emitting
diodes 90
Length, refer to
Dimensions 151
License plate lamp
bulb replacement 136
Light switch 88
Light-emitting diodes
(LEDs) 90
Lighter 100
LIGHTS ON warning 88
Lights, refer to Parking
lamps/Low beams 88
Litter bag holders 99
Load, refer to Cargo
loading 104
Loading
vehicle 104
Load-securing devices 105
Lock buttons on doors, refer
to Locking 34
Lock, steering wheel 62
Locking
from inside 34
from outside 31, 33
Locking and unlocking
doors
from inside 34
from outside 31, 33Low beams 88
automatic 88
bulb replacement 133
indicator lamp, defective
lamp 78
Luggage compartment
capacity 152
emergency operation,
refer to Manual
operation 35
floor mat 38
floor panel 37
lid 35
opening from outside 35
opening, remote
control 32
opening/closing, refer to
Luggage compartment
lid 35
remote control 32
volume 152
Luggage compartment lid 35
emergency operation 35
emergency release 37
indicator lamp 78
opening from inside the
vehicle 35, 36
opening from outside 35
remote control 32
securing separately 35
unlocking manually 35Luggage compartment light-
ing 35
Luggage rack, refer to Roof-
mounted luggage rack 106
Lumbar support 45
M
M Engine dynamics
control 87
M Mobility system 136
M+S tires, refer to Winter
tires 118
Maintenance 78, 126
Maintenance system 126
Making telephone calls,
refer to the telephone
Owner's Manual
Malfunction
door lock 33
fuel filler door 24
Malfunction displays 78
Manual operation
door lock 33
driver's door 33
fuel filler door 24
glass sunroof 42
luggage compartment
lid 35
Manual transmission 66
Master keys
with remote control 30
OverviewControlsMaintenanceRepairsDataIndex

Everything from A to Z
163
Please fasten safety belts
indicator lamp 18
Pollen, refer to Microfil-
ter/activated-charcoal fil-
ter 96
Power output, refer to
Engine data 150
Power seat 45
Power socket, cigarette
lighter 100
Pressure monitoring, tires
Flat Tire Monitor 84
Pressure, tires 25, 114
inflating with Mobility sys-
tem 139
R
Radio remote control key,
refer to Master key with
remote control 30
Radio, refer to the Owner's
Manual for Radio
Rain sensor 73
Raising the floor panel 37
Range 81
Reading lamps
front 90
rear 90
Rear armrest, refer to Rear
center armrest 99
Rear backrest, folding 102Rear center 3-point safety
belt 102
Rear lamps
bulb replacement 135
indicator lamp, defective
lamp 78
Rear window heating
automatic climate
control 95
Rear-entry assist 47
Rearview mirror 51
Receiving assistance 142
Recirculated-air mode
automatic climate
control 95
Recirculating the air, refer to
Recirculated-air mode 95
Reclining seat, refer to Seat
adjustment 45
Refueling 24
fuel filler door 24
Releasing
hood 119
Remaining distance to ser-
vice 78
Remaining distance, refer to
Range 81
Remote control 31
luggage compartment
lid 32
malfunction 32Replacing lamps, refer to
Lamps and bulbs 133
Replacing tires 115
Reporting safety defects 7
Restraint systems
for children 56
Restraint systems, refer to
Safety belts 47
Reverse gear
manual transmission 66
Roof load capacity 152
Roof-mounted luggage
rack 106
Rope, refer to Towing the
vehicle 145
S
Safe seating position 43
Safety belt height adjust-
ment 48
Safety belts 47
height adjustment 48
sitting safely 43
warning lamp 18
Safety feature
glass sunroof 41
power windows 40
Safety systems, refer to
Antilock Brake
System 112
Dynamic Stability Control
(DSC) 83Screwdriver, refer to
Onboard tool kit 132
Seat adjustment
adjusting the lumbar sup-
port 45
backrest width adjust-
ment 46
BMW sports seat 45
lumbar support 45
manual 44
power 45
Seat belt tensioner, refer to
Safety belts 47
Seat heating 50
Seat height adjustment 44
Seat memory, refer to Seat
and mirror memory 49
Seat positions, storing 49
Seats 44
Securing cargo 105
Securing child-restraint sys-
tem 57
Securing the vehicle
from inside 34
from outside 31, 33
Selector lever
sequential M gearbox with
Drivelogic 67
Selector lever positions
sequential M gearbox with
Drivelogic 67
OverviewControlsMaintenanceRepairsDataIndex