2004 BMW 7 SERIES engine coolant

Disconnecting the battery during periods
of long-term storage will interrupt the
calculation of time-based services. Have all
items requiring time-based maintenance,
such as brake fluid and coolant, and possibly
also the engine oil and microfilter, brought up
to date by your BMW center. Also see the
section on battery care on page 16 of this
statement.
Service Interval Display
Info Display screen contents
The distance remaining until your next service
briefly appears when you switch on the
ignition.
The Info Display immediately switches to
its compute mode when you press one
of the two buttons in the turn signal indicator
lever.
Control Display screen contents
The current Status of Service items deter-
mined by the CBS are shown in the Control
Display.
You can view additional information on
service and maintenance procedures by
selecting the “OB data”menu.
1. Select and confirm
2. Select “Service”and confirm your entry
3. The display shows a list of selected service
and maintenance procedures, as well as any
required state inspections.
Red Sectors
The service deadline has already passed.
Yellow Sectors
The deadline for service or a state inspection
is approaching. Please contact your BMW
center for an appointment.
3

Maintenance summary
The Service Interval Indicator System (CBS)
will determine the requirement for perform-
ance of the maintenance services described
on this and the following page. These
services may be required either individually or
in conjunction with other maintenance
services.
Standard operations
Maintenance work
• Brief diagnostic test
• Verify Check Control messages
• Check indicator and warning lights
• Reset CBS display
Engine oil
Maintenance work
• Change the engine oil and oil filter. We
recommend BMW High Performance 5W-30
Synthetic Oil P/N 07 51 0 017 866.
• After every 3rd engine oil change:
Intake air cleaner: replace air filter element
(reduce replacement interval in dusty
operating conditions).
• Parking brake: check function
Microfilter
Maintenance work
• Automatic air conditioning:
Replace microfilter
Front brake
Maintenance work
• Replace brake pads, clean brake pad
contact points in calipers.
• Brake discs:
Check surface and thickness, if necessary
replace at extra charge*
Rear brake
Maintenance work
• Replace brake pads, clean brake pad
contact points in calipers.
• Brake discs:
Check surface and thickness, if necessary
replace at extra charge*
• Parking brake:
Check condition, brake lining thickness and
function, if necessary replace at extra charge*.
*Unless covered by Maintenance Program
Vehicle Check
Maintenance work
• Check operation of horn, headlight flasher
and hazard warning flashers.
• Check instrument and control lighting and
heater/air-conditioning blower.
• Check lighting system: turn signals, back-up,
license plate, interior (incl. map, reading
lights), glovebox, flashlight, luggage area
lights.
• Safety belts: check condition and function.
• Check windshield wiper and washer jet
positions.
• Body: check for corrosion (except cavities).
• Tires: check tread depth, wear pattern, outer
condition, inflation pressure (also spare tire).
If necessary, correct pressure (also spare)
• Battery: check state of charge (magic eye)
and charge if required.
• Power steering reservoir: Check fluid level.
• Visually inspect all SRS airbag units for torn
covers, obvious damage or attachment of
stickers.
• Rear-view mirrors
• Coolant: check fluid level and concentration.
• Windshield washer and intensive cleaning
system: check protection level, fluid level,
top if necessary.
6

New Vehicle Limited Warranty –
2004 Models (Valid Only in the
U.S.A. and Puerto Rico)
Warrantor
BMW NA warrants 2004 U.S. specification
vehicles distributed by BMW NA or sold
through the BMW NA European Delivery
Program against defects in materials or
workmanship to the first retail purchaser, and
each subsequent purchaser.
Warranty Period
The warranty period is 48 months or 50,000
miles, whichever occurs first.
Warranty Begins
This warranty begins on the date of first
retail sale, or the date the vehicle is first
placed in service as a demonstrator or
company vehicle, whichever is earlier.
Warranty Coverage
To obtain service under this warranty, the
vehicle must be brought, upon discovery of a
defect in material or workmanship, to the
workshop of any authorized BMW center,
during normal business hours. The BMW
center will, without charge for parts or labor,
either repair or replace the defective part(s)
using new or authorized remanufactured
parts. The decision to repair or replace said
part(s) is solely the prerogative of BMW NA.
Parts for which replacements are made
become the property of BMW NA.
In all cases, a reasonable time must be allowed
for warranty repairs to be completed after the
vehicle is received by the BMW center.
Safety Belt Warranty - Kansas
Safety belts are covered under the BMW New
Vehicle Limited Warranty for defects in
material or workmanship for a period of 10
years, unlimited mileage from the date of
purchase. In order to be eligible for this
coverage, the vehicle must be a new car
retailed in the State of Kansas and the repair
performed by an authorized BMW center in
Kansas.
Towing/Other Owner Benefits
A 24-hour Roadside Assistance Program is
available to every BMW owner during the new
vehicle warranty period.
Roadside assistance and other owner
benefits are available by calling:
1-800-332-4269
For additional details on towing and other
owner benefits please refer to the BMW
Roadside Assistance section of this
Statement (page 26).
Other Items
Wheel alignment, balancing and wiper blade
inserts are covered up to 2,000 miles.
Items which are subject to wear and tear
or deterioration due to driving habits or
conditions, such as brake pads/linings,
brake discs, clutch disc, pressure plate,
filters, upholstery, trim and chrome items,
paint finish, drive belts, glass, and similar
items, are specifically limited to defects in
material or workmanship.
This warranty does not apply to the follow-
ing:
Damage which results from negligence,
improper operation of the vehicle, improper
repair, lack of or improper maintenance,
environmental influences, flood, accident or
fire damage, road salt corrosion, or use of
improper or contaminated fuel.
Damage to the engine, transmission or any
related component caused by improper shift-
ing of the transmission.
Maintenance services and parts when
replaced during maintenance such as spark
plugs, lubricants, fluids, engine tuneup parts,
replacement of filters, coolant, and refriger-
ant.
Failure to maintain the vehicle properly in
accordance with the instructions in the
Owner’s Manual or the Service section of this
Statement, that results in the failure of any
part of the vehicle.
30