2004 Alfa Romeo 156 spare wheel

CAR MAINTENANCE
251
ADDITIONAL
OPERATIONSEvery 1000 kmor before long journeys
check and if necessary top up:
– engine coolant level
– brake fluid/hydraulic clutch control flu-
id level
– power steering fluid level
– windscreen washer and headlamp wash-
er fluid level
– tyre pressure and conditions.
Every 3000 kmcheck the level of the
engine oil and top up if necessary.
You are recommended to use products of
the FL Selenia, designed and developed
expressly for Alfa Romeo cars (see the table
“Specifications of fluids and lubricants” in
the “Technical specifications” chapter).
ANNUAL INSPECTION
PROGRAMMEAn annual inspection programme
has been established for cars thet
cover less than 20,000 km (e.g.
10,000 km). It consists of the fol-
lowing:
– Check tyre conditions/wear and adjust
pressure if required (including the compact
spare wheel)
– Check lighting system operation (head-
lights, direction indicators, hazard lights,
boot lights, passenger compartment lights,
glovebox light, warning lights of instrument
panel, etc.)
– Check windscreen and rear-screen
wiper/washer operation, adjust nozzles
– Check windscreen/rear-screen blade po-
sition/wear
– Check condition and wear of the front
brake pad
– Check for bonnet and boot lock clean-
ness, lever cleanness and lubrication– Visually check the following: engine,
gearbox, transmission, piping (exhaust - fu-
el - brakes) rubber components (casings -
sleeves - bushings, etc..), brake and fuel
hoses
– Check battery charge condition
– Visually check the condition of the belts
and various controls
– Check and top up if necessary, the flu-
id levels (coolant, brake fluid, windscreen
washer fluid, battery, etc.)
– Change engine oil
– Replace engine oil filter
– Change pollen filter.

CAR MAINTENANCE
271
WHEELS AND TYRESTYRES PRESSURECheck the pressure of each tyre, includ-
ing the compact spare wheel, every two
weeks and before a long journey.
The pressure should be checked with the
tyre rested and cold.
It is normal for the pressure to increase
when the car is in use. If you have to check
or restore the pressure when the tyres are
hot, bear in mind that the pressure should
be +0.3 bar compare with the specified rat-
ing.
For the correct tyre inflation pressure, see
“Wheels” in the “Technical specifications”
chapter.Incorrect pressure causes abnormal tyre
wear fig. 25:
A- Normal pressure: tread evenly worn.
B- Low pressure: tread particularly worn
at the edges.
C- High pressure: tread particularly worn
in the centre.
fig. 25
A0B0235m
WARNINGS
Where possible, avoid sudden braking, tyre
squealing starts, etc.
Particularly avoid violent bumps against
kerbs, potholes or obstacles of various kinds.
Prolonged driving on rough roads may dam-
age the tyres.
Routinely check the tyres for cuts on the
sides, swellings or uneven tread wear. If nec-
essary contact Alfa Romeo Authorized Ser-
vices.
Avoid overloading the vehicle when trav-
elling: this may cause serious damage to the
wheels and tyres.
If a tyre is punctured, stop immediately
and change it to avoid damage to the tyre,
the rim, suspensions and steering system.
Tyres age even if they are not used much.
Cracks in the tread rubber are a sign of ag-
ing. In any case, if the tyres have been on
the car for over 6 years, they should be
checked by specialised personnel, to see if
they can still be used. Also remember to
check the spare wheel.
Remember that car road
holding also depends on
correct tyre inflation pressure.
WARNING
Excessively low pressure
causes overheating of the
tyre with the possibility of serious
damage to it.
WARNING
Tyres should be changed when the tread
thickness is reduced to 1.6 mm. In any case
follow local regulations.

ALFA 156 SPORTWAGON
294
IN THE EVENT
OF A PUNCTUREWARNINGIf the car is equipped with
“Fix&Go kit for tyre quick repair”, see the
instructions contained in the “In emergency”
chapter.fig. 47
A0B0127m
TOOL AND SPARE WHEEL
HOUSING
(for versions/markets where
required)
(fig. 47)
The tools and spare wheels are housed in
the boot floor, under the mat. To gain
access to them, raise or remove the boot
mat using the handle (A-fig. 47).
To take the container with the tools (B)
slacken the handle (C).
The spare wheel (D) can be taken after
removing the container with the tools.
IF AN EXTERIOR
LIGHT GOES OUTWARNINGBefore changing a bulb, read
the warnings and precautions given in the
chapter “In an emergency”.REVERSING LIGHTS AND REAR
FOG GUARDSTo change the bulbs (Type B, 21W):
– Open the tailgate.
– Remove the cover (Aor B-fig. 48) in
correspondence with the light concerned,
withdrawing it at the side.fig. 48
A0B0128m

TECHNICAL SPECIFICATIONS
306
WHEELS AND TYRES
1.8 T.SPARK
PROGRESSION
6J x 15”
185/65 R15” 88V
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91V
(▼)
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17“ (*)1.8 T.SPARK
DISTINCTIVE
6,5J x 16”
205/55 R16” 91V
(●)
4J x 15”
T125/80 R15” 95M
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17“ (*) 1.6 T.SPARK
PROGRESSION
6J x 15”
185/65 R15” 88H
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15” (❒)
205/60 R15” 91V
(▼)
6,5J x 16” (❒)
205/55 R16” 91V
(●)
7J x 17 ”
215/45 ZR17 (*)1.6 T.SPARK
DISTINCTIVE
6,5J x 16”
205/55 R16” 91V
(●)
4J x 15”
T125/80 R15” 95M
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17“ (*)1.8 T.SPARK
IMPRESSION
6J x 15”
185/65 R15” 88V
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91V
(▼)
1.6 T.SPARK
IMPRESSION
6J x 15”
185/65 R15” 88H
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91V
(▼)
VersionsStandard fittingsSteel wheelTyres
Alloy wheelTyres
Spare – rimwheel: – tyreOptional fittingsAlloy wheelTyre
Alloy wheelTyres
Alloy wheelTyres(*) = Snow chains may not be used on this tyres
(●) = Tyres on which chains can be fitted: use snow chains with reduced size with max. protrusion beyond the tyre profile of 9 mm.
(▼) = Tyres on which chains can be fitted: use snow chains with reduced size with max. protrusion beyond the tyre profile of 12 mm.
(❒) = Excluding Sportwagon versions
Winter tyres: winter tyres with “Q” min. speed index can be used.

TECHNICAL SPECIFICATIONS
307
2.5 V6 24V
PROGRESSION
6,5J x 15”
205/60 R15” 91W
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91W
(▼)
6,5J x 16”
205/55 R16” 91W
(●)
7J x 17”
215/45 ZR17” (*) 2.0 JTS Selespeed
PROGRESSION
6,5J x 15”
205/60 R15” 91V
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91V
(▼)
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17” (*) 2.0 JTS
DISTINCTIVE
6,5J x 16”
205/55 R16” 91V
(●)
4J x 15”
T125/80 R15” 95M
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17“ (*) 2.0 JTS
PROGRESSION
6,5J x 15”
205/60 R15” 91V
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91V
(▼)
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17“ (*) 2.0 JTS
IMPRESSION
6J x 15”
185/65 R15” 88V
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91V
(▼)
2.0 JTS Selespeed
DISTINCTIVE
6,5J x 16”
205/55 R16” 91V
(●)
4J x 15”
T125/80 R15” 95M
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17” (*)
VersionsStandard fittingsSteel wheelTyres
Alloy wheel
Tyres Spare – rimwheel: – tyreOptional fittingsAlloy wheel
TyreAlloy wheelTyre
Alloy wheelTyres(*) = Snow chains may not be used on this tyres
(●) = Tyres on which chains can be fitted: use snow chains with reduced size with max. protrusion beyond the tyre profile of 9 mm.
(▼) = Tyres on which chains can be fitted: use snow chains with reduced size with max. protrusion beyond the tyre profile of 12 mm.
Winter tyres: winter tyres with “Q” min. speed index can be used.

TECHNICAL SPECIFICATIONS
308
(*) = Snow chains may not be used on this tyres
(●) = Tyres on which chains can be fitted: use snow chains with reduced size with max. protrusion beyond the tyre profile of 9 mm.
(▼) = Tyres on which chains can be fitted: use snow chains with reduced size with max. protrusion beyond the tyre profile of 12 mm.
Winter tyres: winter tyres with “Q” min. speed index can be used.
VersionsStandard fittings
Steel wheelTyres
Alloy wheelTyres
Spare wheel:
– rim
– tyre
Optional fittings
Alloy wheel
Tyre
Alloy wheelTyres
Alloy wheelTyres
JTD
PROGRESSION
6J x 15”
185/65 R15” 88V
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91V
(▼)
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17“ (*)JTD
DISTINCTIVE
6,5J x 16”
205/55 R16” 91V
(●)
4J x 15”
T125/80 R15” 95M
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17“ (*) JTD
IMPRESSION
6J x 15”
185/65 R15” 88V
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91V
(▼)
2.5 V6 24V
Q-System
DISTINCTIVE
6,5J x 16”
205/55 R16” 91W
(●)
4J x 15”
T125/80 R15” 95M
6,5J x 16”
205/55 R16” 91W
(●)
7J x 17”
215/45 ZR17” (*)2.5 V6 24V
DISTINCTIVE
6,5J x 16”
205/55 R16” 91W
(●)
4J x 15”
T125/80 R15” 95M
6,5J x 16”
205/55 R16” 91W
(●)
7J x 17”
215/45 ZR17” (*) 2.5 V6 24V
Q-System
PROGRESSION
6,5J x 15”
205/60 R15” 91W
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91W
(▼)
6,5J x 16”
205/55 R16” 91W
(●)
7J x 17”
215/45 ZR17” (*)

TECHNICAL SPECIFICATIONS
309
JTD 16V Multijet
PROGRESSION
6J x 15”
185/65 R15” 88V
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91V
(▼)
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17“ (*) JTD 16V Multijet
IMPRESSION
6J x 15”
185/65 R15” 88V
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91V
(▼)
JTD 16V Multijet
DISTINCTIVE
6,5J x 16”
205/55 R16” 91V
(●)
4J x 15”
T125/80 R15” 95M
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17“ (*)JTD 20V Multijet
PROGRESSION
6,5J x 15”
205/60 R15” 91V
(▼)
4J x 15”
T125/80 R15” 95M
6,5J x 15”
205/60 R15” 91V
(▼)
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17“ (*)JTD 20V Multijet
DISTINCTIVE
6,5J x 16”
205/55 R16” 91V
(●)
4J x 15”
T125/80 R15” 95M
6,5J x 16”
205/55 R16” 91V
(●)
7J x 17”
215/45 ZR17“ (*)
VersionsStandard fittings
Steel wheelTyres
Alloy wheelTyres
Spare wheel:
– rim
– tyre
Optional fittings
Alloy wheel
Tyre
Alloy wheelTyres
Alloy wheelTyres(*) = Snow chains may not be used on this tyres
(●) = Tyres on which chains can be fitted: use snow chains with reduced size with max. protrusion beyond the tyre profile of 9 mm.
(▼) = Tyres on which chains can be fitted: use snow chains with reduced size with max. protrusion beyond the tyre profile of 12 mm.
Winter tyres: winter tyres with “Q” min. speed index can be used.

TECHNICAL SPECIFICATIONS
310
RIMS AND TYRESPressed steel or alloy rims.
Radial Tubeless tyres.
The Log book shows all the homologated
tyres.
WARNINGIn the event of any discrep-
ancies between this Handbook and the ve-
hicle Log Book, only the latter should be con-
sidered.While the specified dimensions remain the
same, for driving safety, the vehicle must
be fitted with tyres of the same brand and
type on all wheels.TYRE INFLATION PRESSURES COLD
Tyres
185/65 R15”
(▼)
front rear2.2 2.2
2.5 2.5
Tyres
205/55 R16”
(●)
front rear2.4 2.4
2.6 2.6
Tyres
205/60 R15”
(▼)
front rear2.2 2.2
2.5 2.5
Tyres
215/45 ZR17”
(*)
front rear2.4 2.4
2.6 2.6
Compact spare
wheel
125/80 R15”
4.2
WARNINGDo not use inner tubes with
Tubeless tyres.
Reduced load (2 occupants) barFull load bar(*) = Snow chains may not be used on this tyres
(●) = Tyres on which chains can be fitted: use snow chains with reduced size with max. protrusion beyond the tyre profile of 9 mm.
(▼) = Tyres on which chains can be fitted: use snow chains with reduced size with max. protrusion beyond the tyre profile of 12 mm.
With the tyre hot the inflating pressure should be +0.3 bar compared with the specified rating. Recheck pressure value with cold tyres.
With winter tyres the inflation pressure should be +0.2 bar compared with the specified rating.