Help assure your vehicle’s f uture
reliability and perf ormance by paying
extra attention to how you drive
during the f irst 600 miles (1,000 km).
During this period:Avoid full-throttle starts and rapid
acceleration.
Avoidhardbrakingforthefirst
200 miles (300 km).
Do not change the oil until the
scheduled maintenance time.
Do not tow a trailer. Your Acura is designed to operate on
unleaded gasoline with a pump
octane number of 86 or higher.
Your Acura is designed to operate on
premium unleaded gasoline with a
pump octane number of 91 or higher.
You should also f ollow these re-
commendations with an overhauled
or exchanged engine, or when the
brakes are replaced. Useof aloweroctanegasolinecan
cause a persistent, heavy, metallic
rapping noise in the engine that can
lead to mechanical f ailure.
We recommend gasoline containing
detergent additives that help prevent
f uel system and engine deposits. In
addition, in order to maintain good
perf ormance, f uel economy, and
emissions control, we strongly
recommend, in areas where it is
available, the use of gasoline that
does NOT contain manganese-based
f uel additives such as MMT. Use ofgasoline with these additives may
adversely affect performance, and
cause the Malf unction Indicator
Lamp on your instrument panel to
come on. If this happens, contact
your authorized Acura dealer f or
service. For f urther important f uel-
related information, please refer to
your Quick Start Guide.
Some gasoline today is blended with
oxygenates such as ethanol or
MTBE. Your vehicle is designed to
operate on oxygenated gasoline
containing up to 10 percent ethanol
by volume and up to 15 percent
MTBE by volume. Do not use
gasoline containing methanol.
If you notice any undesirable
operating symptoms, try another
service station or switch to another
brand of gasoline.(All models except Type-S)
(Type-S)
Break-in Period Fuel Recommendation
Bef ore Driving
Break-in Period, Fuel Recommendation
121
µ
An oil with a viscosity of 5W-30 is
pref erred f or improved f uel economy
and year-round protection in your
Acura. You may use a 10W-30 oil if
the temperature in your area never
goes below 20°F ( 7°C). Your Acura does not require any oil
additives. Additives may adversely
af f ect your engine’s or transmission’s
perf ormance and durability.Always change the oil and f ilter
according to the recommendations in
the maintenance schedule. The oil
and f ilter collect contaminants that
can damage your engine if they are
not removed regularly.
Changing the oil and f ilter requires
special tools and access f rom
underneath the vehicle. The vehicle
should be raised on a service station-
type hydraulic lif t f or this service.
Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilled
mechanic.
Run the engine until it reaches
normal operating temperature,
then shut it off.
You may use a synthetic motor oil if
it meets the same requirements
given f or a conventional motor oil: it
displays the API Certif ication Seal
and it is the proper weight. You must
f ollow the oil and f ilter change
intervals given in the maintenance
schedule.
1.
CONT INUED
Type-S
Maint enance
Synthetic Oil
Engine Oil A dditivesChanging the Oil and Filter
A dding Engine Oil, Changing the Oil and Filter
165
Ambient Temperature
Always use Honda ATF-Z1
(Automatic Transmission Fluid). If
it’s not available, you may use a
DEXRON
III automatic
transmission f luid as a temporary
replacement. However, continued
use can affect the shift quality. Have
the transmission f lushed and ref illed
with Honda ATF-Z1 as soon as it is
convenient.
To thoroughly f lush the transmission,
the technician should drain and ref ill
it with Honda ATF-Z1, then drive the
vehicle f or a short distance. Do this
three times. Then drain and ref ill the
transmission a f inal time.
Insert the dipstick all the way back
in the transmission.
The transmission should be drained
and ref illed with new f luid according
to the time and distance recommen-
dations in the maintenance schedule. Check the f luid level with the
transmission at normal operating
temperature and the vehicle sitting
on level ground. Remove the
transmission f iller bolt, and caref ully
f eel inside the bolt hole with your
f inger. The f luid level should be up
to the edge of the bolt hole. If it is
not, add Honda Manual
Transmission Fluid (MTF) until it
starts to run out of the hole. Reinstall
the f iller bolt, and tighten it securely.If Honda MTF is not available, you
may use an SAE 10W-30 or 10W-40
viscosity motor oil with the API
Certif ication seal that says ‘‘FOR
GASOLINE ENGINES’’ as a
temporary replacement. However,
motor oil does not contain the proper
additives, and continued use can
cause stiffer shifting. Replace as
soon as it is convenient.
The transmission should be drained
and ref illed with new f luid according
to the time and distance recommen-
dations in the maintenance schedule.
6.
A ut omat ic T ransmission Fluid, Manual T ransmission Fluid
Maint enance
Manual Transmission Fluid
170
Correct level
FILLER BOLT
CONT INUED
....................................
Accessories .127
ACCESSORY (Ignition Key .......................................
Position) .66
..............
Accessory Power Sockets . 85
....................
Additives, Engine Oil . 165
.............................
Airbag (SRS) .10, 22
...
Airbags, Additional Information . 22
...
Additional Safety Precautions . 28
.............................
Airbag Service .28
How the Side Airbag Cutof f ......................
Indicator Works .27
..
How the SRS Indicator Works . 26
How Your Front Airbags .........................................
Work .22
...
How Your Side Airbags Work . 25
........................
SRS Components .22
................
Air Conditioning System . 88
.......................
Air Pressure, Tires .184
......................................
Antif reeze .168
Anti-lock Brakes (ABS) ...............................
Indicator .51, 147
...................................
Operation .147
Anti-thef t Steering Column ..............................................
Lock .65 ..................................
Audio System .92
...
Automatic Seat Belt Tensioners . 20
.............
Automatic Speed Control . 115
..............
Automatic Transmission . 139
..........................
Capacity,Fluid .220
...............
Checking Fluid Level . 169
.......................................
Shif ting .139
.
Shif t Lever Position Indicator . 139
................
Shif t Lever Positions . 139
....................
Shif t Lock Release . 144
Battery Charging System ...........................
Indicator .51, 205
............................
Jump Starting .200
..............................
Maintenance .188
............................
Specif ications .221
..............................
Bef ore Driving .119
....................................
Belts,Seat .8,19
...........................
Beverage Holders .85
..................................
Booster Seats .42
Brakes ...........
Anti-lock System (ABS) . 147
.............
Break-in, New Linings . 121....................
Bulb Replacement .174
...........................................
Fluid .171
.................
System Indicator . 51,208
........................
Wear Indicators .146
.............................
Braking System .146
.................
Break-in, New Vehicle . 121
..
Brightness Control, Instruments . 61
........................
Brights, Headlights .60
Bulb Replacement ..........................
Back-up Lights .178
..............................
Brake Lights .178
................
Front Parking Lights . 177
.........
Front Turn Signal Lights . 176
.................................
Headlights .174
.........
High-mount Brake Light . 178
.........
Rear Side Marker Lights . 178
............................
Specif ications .221
..............................
Bulbs, Halogen .174
Index
A
B
I