2003 YAMAHA YFM350R warning

7-21
During operation
Always keep your feet on the footboards during
operation. Otherwise your feet may contact the
rear wheels.
WARNING
_ Always keep both hands on the handlebars
and both feet on the footboards of your ATV
during operation. Removing even one hand or
foot can reduce your ability to control the ATV
or could cause you to lose your balance and
fall off of the ATV. If you remove a foot from a
footboard, your foot or leg may come into con-
tact with the rear wheels, which could injure
you or cause an accident. _Avoid wheelies and jumping. You may lose control
of the ATV or overturn.
WARNING
_ Never attempt stunts, such as wheelies or
jumps. Don’t try to show off. _
U5NF62.book Page 21 Wednesday, May 8, 2002 1:40 PM

7-23
Modifications
WARNING
_ Never modify this ATV through improper in-
stallation or use of accessories. All parts and
accessories added to this vehicle should be
genuine Yamaha or equivalent components
designed for use on this ATV and should be in-
stalled and used according to instructions. Im-
proper installation of accessories or
modification of this vehicle may cause chang-
es in handling which in some situations could
lead to an accident. If you have questions, con-
sult an authorized ATV dealer. _
U5NF62.book Page 23 Wednesday, May 8, 2002 1:40 PM

7-25
Exhaust system
The exhaust system on the ATV is very hot during
and following operation. To prevent burns, avoid
touching the exhaust system. Park the ATV in a
place where pedestrians or children are not likely
to touch it. Dry grass or brush or other combustible
material accumulated around the engine area
could catch fire.
WARNING
_ Do not touch the hot exhaust system. Do not
park the ATV during or after operation in a
place where others might be likely to touch it.
Keep the engine area free of dry grass, brush,
or other combustible material. Do not operate,
idle, or park the ATV in dry grass or other dry
ground cover. _
U5NF62.book Page 25 Wednesday, May 8, 2002 1:40 PM

7-27
BE CAREFUL WHERE YOU RIDE
This ATV is designed for off-road use only. Riding
on paved surfaces can cause loss of control.
WARNING
_ Always avoid paved surfaces, including side-
walks, driveways, parking lots and streets.
ATVs are designed for off-road use only.
Paved surfaces may seriously affect handling
and control of the ATV, and may cause the ve-
hicle to go out of control. _Do not ride on any public road, street, or highway.
Riding on public roads can result in collisions with
other vehicles.
WARNING
_ Never operate this ATV on any public street,
road or highway, even a dirt or gravel one. You
can collide with another vehicle. In many ar-
eas, it is illegal to operate ATVs on public
streets, roads and highways. _
U5NF62.book Page 27 Wednesday, May 8, 2002 1:40 PM

7-29
Know the terrain where you ride. Ride cautiously in
unfamiliar areas. Stay alert for
holes, rocks, or
roots in the terrain, and
other hidden hazards
which may cause the ATV to upset.
WARNING
_ Go slowly and be extra careful when operating
this ATV on unfamiliar terrain. Always be alert
to changing terrain conditions when operating
the ATV. _
WARNING
_ Do not operate on excessively rough, slippery
or loose terrain until you have learned and
practiced the skills necessary to control the
ATV on such terrain. Failure to use extra care
when operating on excessively rough, slippery
or loose terrain could cause loss of traction or
vehicle control, which could result in an acci-
dent, including an overturn. _
U5NF62.book Page 29 Wednesday, May 8, 2002 1:40 PM

7-31
When riding in an area where you might not easily
be seen, such as desert terrain, mount a caution
flag on the ATV. DO NOT use the flag pole bracket
as a trailer hitch.
WARNING
_ Always mount a caution flag on the ATV to
make you more visible when operating in ar-
eas where you might not be seen by other off-
road vehicles. Watch carefully for other vehi-
cles. _Do not ride in areas posted “no trespassing”. Do
not ride on private property without getting permis-
sion.
U5NF62.book Page 31 Wednesday, May 8, 2002 1:40 PM

7-35
With the engine idling, pull the clutch lever to dis-
engage the clutch and shift into 1st gear, and then
release the parking brake. Open the throttle grad-
ually, and at the same time, release the clutch le-
ver slowly. Once the ATV has attained adequate
speed, release the throttle lever and at the same
time, quickly pull in the clutch lever and shift into
2nd gear. Open the throttle part way and gradually
release the clutch. Use this same procedure as
you move into the higher gears. Be sure to coordi-
nate the use of the throttle and shift pedal properly.
If the throttle is applied too abruptly or if the throttle
is not released during shifting, or if the shift pedal
is not released before applying the throttle, the
front wheels may lift off the ground resulting in a
loss of directional control. Avoid higher speeds un-
til you are thoroughly familiar with the operation of
your ATV.
WARNING
_ Always open the throttle gradually and release
the clutch lever slowly. Otherwise, the ATV
could wheelie which would increase the
chance of an accident. _
U5NF62.book Page 35 Wednesday, May 8, 2002 1:40 PM

7-37
CAUTION:_ Do not shift gears without releasing the throt-
tle. Damage to the engine or drive train may oc-
cur. _When slowing down or stopping, release the throt-
tle and apply the brakes smoothly and evenly. As
you slow down, shift to a lower gear. Be sure that
the engine has sufficiently slowed before engaging
a lower gear. Improper use of the brakes or shift-
ing can cause the tires to lose traction, reducing
control and increasing the possibility of an acci-
dent.
WARNING
_ Make sure the engine has sufficiently slowed
before shifting to a lower gear. Engaging a low-
er gear when the engine speed is too high
could cause the wheels to stop rotating. _
U5NF62.book Page 37 Wednesday, May 8, 2002 1:40 PM