2003 YAMAHA BREEZE fuel

8-93
wDo not smoke when checking the fuel sys-
tem. Fuel can ignite or explode, causing
severe injury or property damage. Make sure
there are no open flames or sparks in the
area, including pilot lights from water
heaters or furnaces.
5VJ-9-60-08 3/26/02 9:17 PM Page 8-94

8-95
EBU00440Troubleshooting chart1. FuelCheck if there is
fuel in the fuel
tank.2. CompressionUse electric starter
to see if there is
compression.3. IgnitionRemove plug and
check electrodes.
Wet
Wipe clean with dry
cloth.
Dry
Attach plug cap and
ground to chassis.
Use electric
starter.
Spark weak.Spark good.
Ignition system normal.
No spark.
Ask a Yamaha dealer to inspect.
Adjust plug gap or
replace plug.
There is compresson.
Compression normal.Ask a Yamaha dealer to inspect.
No compression.
There is fuel.
Turn the fuel
cock to “OFF”.Remove the
fuel hose from
the fuel cock.
Some fuel.
Turn the fuel
cock to “RES”.
Restart engine.
No fuel.
Supply fuel.
4. BatteryUse electric
starter.
Engine turns
over quickly.
Battery good.
Engine turns
over slowly.
Check fluid, recharge,
check connections.
Check fuel flow.
Water or dirt
mixed in fuel.Turn the fuel
cock to “ON”.
No fuel.
Fuel cock clogged.
Clean the fuel filter
and the fuel tank.
Clean fuel cock.
5VJ-9-60-08 3/26/02 9:17 PM Page 8-96

9-7
EBU00526B. STORAGE
Long term storage (60 days or more) of your
machine will require some preventive procedu-
res to guard against deterioration. After tho-
roughly cleaning the machine, prepare for stora-
ge as follows:
1. Fill the fuel tank with fresh fuel and add fuel
stabilizer (if available).NOTE:
Use of fuel stabilizer eliminates the need to
drain the fuel system. Consult a Yamaha dealer
if the fuel system is to be drained instead.2. Remove the spark plug, pour about one
tablespoon of SAE 10W30 or 20W40 motor
oil in the spark plug hole and reinstall the
spark plug. Ground the spark plug wire and
turn the engine over several times to coat
the cylinder wall with oil.
5VJ-9-60-09~11 3/26/02 9:18 PM Page 8

10-1
SPECIFICATIONS
Model YFA1
Dimensions:
Overall length 1,640 mm
Overall width 965 mm
Overall height 980 mm
Seat height 690 mm
Wheelbase 1,080 mm
Minimum ground clearance 145 mm
Minimum turning radius 2,900 mm
Basic weight:With oil and full fuel tank 144 kg
Engine:
Engine type Air-cooled, 4-stroke, SOHC
Cylinder arrangement Singlel cylinder, Forward-inclined
Displacement 124 cm
3
Bore × stroke 49 ×66 mm
Compression ratio 9.0 : 1
Starting system Electric starter
Lubrication system Wet sump
EBU00428
5VJ-9-60-09~11 3/26/02 9:18 PM Page 12

10-3
Model YFA1
Air filter:
for engine Wet type element
for V-belt compartment Dry type element
Fuel:
Type Regular unleaded gasoline only
Fuel tank capacity 7.0 LFuel reserve amount 1.3 L
Carburetor:Type/manufacturer VM18SH/MIKUNI
Spark plug:
Type/manufacturer CR7HS/NGKGap 0.6–0.7 mmClutch type: Dry, centrifugal automatic
Transmission:
Primary reduction system Helical gear/Spur gear
Primary reduction ratio 43/14 ×40/17 (7.226)
Secondary reduction system Chain drive
Secondary reduction ratio 32/12 (2.666)
Transmission type/Reduction ratio V-belt automatic/2.30 – 0.82
Reverse (2.30 – 0.82) ×49/14 ×49/15 ×40/17
(61.874 – 22.059)
5VJ-9-60-09~11 3/26/02 9:18 PM Page 14