2003 YAMAHA BREEZE engine oil

[x] Cancel search: engine oil

Page 14 of 350

YAMAHA BREEZE 2003  Manuale de Empleo (in Spanish) Engine and transmission oil ...............5-11
Chain ..................................................5-15
Throttle lever ......................................5-15
Fittings and fasteners ..........

Page 15 of 350

YAMAHA BREEZE 2003  Manuale de Empleo (in Spanish) PERIODIC MAINTENANCE AND
ADJUSTMENT .........................................8-1
Owner’s manual and tool kit .................8-3
Periodic maintenance/Lubrication ........8-7
Engine oil ............

Page 81 of 350

YAMAHA BREEZE 2003  Manuale de Empleo (in Spanish) 5-1
EBU00113
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Brakes• Check operation, condition and free play. 5-5 – 5-7, 
• Adjust if necessary. 8-

Page 91 of 350

YAMAHA BREEZE 2003  Manuale de Empleo (in Spanish) 5-11
w8Do not overfill the fuel tank. Fuel expands
when it heats up. If the fuel tank is over-
filled, fuel could spill out due to heat from
the engine or the sun.
8Be careful not to spill fuel, espec

Page 93 of 350

YAMAHA BREEZE 2003  Manuale de Empleo (in Spanish) 5-13
cCBe sure to use motor oils that do not contain
anti-friction modifiers. Passenger car motor oils
(often labeled “ENERGY CONSERVING 
II”)
contain anti-friction additives which will cause
clut

Page 95 of 350

YAMAHA BREEZE 2003  Manuale de Empleo (in Spanish) 5-15
EBU00498Chain
Check the general condition of the chain and
check the chain slack before every ride.
Lubricate and adjust the chain as necessary.
(See pages 8-53 – 8-59 for details.)EBU01083Thro

Page 229 of 350

YAMAHA BREEZE 2003  Manuale de Empleo (in Spanish) 8-7
EBU00262PERIODIC MAINTENANCE/LUBRICATION
INITIAL EVERY
ITEM ROUTINE
13661
month
months months months
year
Valves*• Check valve clearance.
1111
• Adjust if necessary.
• Check condition.
Spark

Page 235 of 350

YAMAHA BREEZE 2003  Manuale de Empleo (in Spanish) 8-13
EBU00896Engine oil
Engine oil level measurement
1. Place the machine on a level surface.
2. Warm up the engine for several minutes and
stop it.
3. Remove the dipstick and wipe it off with a
clean
Page:   1-8 9-16 17-24 next >