8-51
EBU01143
Idle speed adjustment
NOTE:
A diagnostic tachometer must be used for this
procedure.
1. Start the engine and warm it up for a few
minutes at approximately 1,000 to 2,000
r/min. Occasionally rev the engine to 4,000
to 5,000 r/min. The engine is warm when it
quickly responds to the throttle.
2. Connect the tachometer tachometer to the
spark plug lead, and then set the idle to the
specified idling speed by adjusting the throt-
tle stop screw. Turn the screw in to direction
ato increase the engine speed, and out in
direction bto decrease the engine speed.
1
a
b
1. Throttle stop screw1. Vis de butée de papillon1. Tornillo tope del acelerador
Specified idle speed:
1,450 ~1,550 r/min
5VM-9-60 (8 shou) 6/20/02 4:22 PM Page 52
9-5
7. Clean the seat with a vinyl upholstery clean-
er to keep the cover pliable and glossy.
8. Automotive type wax may be applied to all
painted and chrome plated surfaces. Avoid
combination cleaner-waxes. Many contain
abrasives which may mar the paint or pro-
tective finish.
When finished, start the engine and let it idle
for several minutes.
w
Wet brakes may have reduced stopping abili-
ty, increasing the chance of an accident.
Test the brakes after washing. Apply the
brakes several times at slow speeds to let
friction dry out the linings.
5VM-9-60 (9 shou ~) 6/21/02 11:14 AM Page 6
