Page 268 of 378
8-15 1. Drain bolt 2. O-ring
3. Compression spring 4. Oil strainer
1. Boulon de vidange 2. Joint torique
3. Ressort de compression 4. Crépine d’huile
1. Perno de drenaje 2. Junta tórica
3. Muelle de compresión 4. Tamiz de aceite
Engine oil replacement and oil filter element
cleaning
1. Place the machine on a level surface.
2. Warm up the engine for several minutes and
stop it.
3. Place a container under the engine to collect
the used oil.
4. Remove the engine oil filler cap and then the
drain bolt to drain the oil.CAUTION:_ When removing the drain bolt, the compres-
sion spring, oil strainer and O-ring will fall out.
Take care not to lose these parts. _
U4XE64.book Page 15 Thursday, May 30, 2002 1:49 PM
Page 270 of 378
8-17 1. Oil filter cover
2. Oil filter element
3. O-ring
1. Couvercle du filtre à huile
2.Élément du filtre à huile
3. Joint torique
1. Tapa del filtro de aceite
2. Elemento del filtro de aceite
3. Junta tórica
5. Remove the oil filter cover and oil filter ele-
ment.
6. Clean the oil strainer and oil filter element
with solvent.
7. Inspect the O-ring and replace it if damaged.
8. Install the oil filter element, O-ring and oil filter
cover.
9. Install the oil strainer, compression spring,
O-ring and drain bolt.
10. Tighten the drain bolt and the oil filter cover
bolts to the specified torques.CAUTION:_ Before installing the drain bolt, be sure to in-
stall the O-ring, compression spring and oil
strainer. _11. Fill the engine with oil and install the engine
oil filler cap. Tightening torque:
Drain bolt (engine):
43 Nm (4.3 m·kgf)
Oil filter cover bolt:
10 Nm (1.0 m·kgf)
U4XE64.book Page 17 Thursday, May 30, 2002 1:49 PM
Page 276 of 378
8-23 1. Drain bolt
1. Boulon de vidange
1. Tapón de vaciado
4. Remove the oil filler bolt and the drain bolt to
drain the oil.
5. Install the drain bolt and tighten it to the spec-
ified torque.
6. Fill the final gear case with oil.CAUTION:
Be sure no foreign material enters the final
gear case. Tightening torque:
Drain bolt (final gear case):
23 Nm (2.3 m·kgf)
Recommended oil:
See page 10-2.
Oil quantity:
Periodic oil change:
0.25 L
Total amount:
0.27 L
U4XE64.book Page 23 Thursday, May 30, 2002 1:49 PM
