2003 TOYOTA MATRIX display

’03 MATRIX_U (L/O 0201)
1262003 MY COROLLA MATRIX_U (OM12767U)
1 2 3 4 5 6 (Preset or disc selection
buttons)
Radio
These buttons are used to preset and
tune in radio stations.
To preset a station to a button:1. Tune in the desired station. (See “TUNE”, “SEEK” or “SCAN”.)
If you desire to select the equalization
that best suits the type of station se-
lected, push the “AUTO EQ” button.
(See “AUTO EQ”.)
2. Push and hold the preset button until you hear a beep—this will set the sta-
tion and EQ setting to the button. The
preset number will appear on the dis-
play.
3. Repeat the above steps for each but- ton.
To tune to a preset station: Push the but-
ton for the station you want. The preset
button number and station frequency will
appear on the display.
RDS stations will be preset to the buttons
when any of RDS stations is received in
the FM mode. To preset a program type to a button:
1. Push the “AM/FM” button to select “FM1” or “FM2”.
2. Push “P·TYPE” button to activate the program type mode. “P·TYPE” will ap-
pear on the display.
3. Turn the select knob to select the de- sired program type.
4. Push and hold the preset button until you hear a beep—this will set the pro-
gram type to the preset button.
5. Repeat the above steps for each but- ton.
To tune to a station with a desired pro-
gram type: while in a program type mode,
push the preset button for the program
type you want. The program type will ap-
pear on the display and the radio will tune
the station with strongest signal and the
desired program type.
Each button can store one AM and two
FM stations, and two RDS program types.
(The display will show “AM”, “FM1” or
“FM2” when you push “AM/FM”.) Compact disc auto changer
These buttons are used to select the disc
while in the compact disc mode.
To select the disc, push the number but-
ton you want to listen to.
(Eject button)
This button is used to eject one or all
compact discs. To eject the current com-
pact disc, push and release the eject but-
ton. To eject a specific disc while in the
compact disc mode, push the number but-
ton of the disc you want to eject then
push and release the eject button. To
eject all discs, press and hold the eject
button until you hear two beeps. The last
compact disc played before pushing the
button will be ejected first.
When the eject button is pushed,
“REMOVED CD” will be displayed and one
beep will sound. If the disc is not
removed within 25 seconds, the disc will
be automatically pulled back into the
receiver.
If the changer is empty when the eject
button is pushed, three beeps will sound.

’03 MATRIX_U (L/O 0201)
1272003 MY COROLLA MATRIX_U (OM12767U)
If you try to push the disc back into the
receiver before 25second time period is
complete, the receiver will try to eject the
disc again when the 25second time peri-
od is complete.
Do not repeatedly push the eject button to
eject a disc after you have tried to push
it in manually. The receiver 25second
eject timer will reset at each push of
eject, which will cause the receiver not to
eject the disc until the 25second time
period has elapsed.
Once the player stops and the disc is
ejected, remove the disc. After removing
the disc, push the “PWR/VOL” knob off
and then on again. This will clear the
discsensing feature and enable discs to
be loaded into the player again.
While the ignition is in “LOCK”, you can
eject one or all discs but you cannot rein-
sert them.
<< REV FDW >> (Reverse/Fastforward
button)
If you want to fastforward or reverse a
compact disc track, push and hold the
“>>” (fastforward) or “<< (reverse) button.
When you release the button, the compact
disc auto changer will resume playing.
The display will show elapsed time.AM/FM
Push the “AM/FM” button to switch be-
tween the AM and FM band. “AM”, “FM1”
or “FM2” will appear on the display.
Also, push this button to switch from the
compact disc operation to the radio.
Alternate Frequency function
To turn the AF mode on, push and hold
the “AM/FM” button until you hear a beep.
“AF ON” will appear on the display.
When reception condition worsen, the au-
dio system will select the RDS station
which has the same PI (Program Identifi-
cation) code.
To turn off the AF mode off, push and
hold the “AM/FM” button again until you
hear a beep. “AF OFF” will appear on the
display.
AUDIO (manual tone and sound balance
adjustment function)
Manual tone adjustment function—
This knob is used to adjust the tone
manually.
Manual tone operations are saved into the
custom setting of the equalization. (See
“AUTO EQ”.)
For lowpitch tone adjustment, push the
“AUDIO” knob repeatedly until “BASS”
appears on the display. Then turn the
knob to suit your preference.
The display will show the range from
“BASS 6” to “BASS +6”.
For middlepitch tone adjustment, push
the “AUDIO” knob repeatedly until “MID”
appears on the display. Then turn the
knob to suit your preference.
The display will show the range from “MID
6” to “MID +6”.
For highpitch tone adjustment, push the
“AUDIO” knob repeatedly until “TREB”
appears on the display. Then turn the
knob to suit your preference.
The display will show the range from
“TREB 6” to “TREB +6”.

’03 MATRIX_U (L/O 0201)
1282003 MY COROLLA MATRIX_U (OM12767U)
To adjust all of the tone controls to the
middle position, push and hold the
“AUDIO” knob for more than 2 seconds.
“FLAT” will appear on the display.
Sound balance adjustment function—
This knob is also used to adjust the
sound balance between the front and rear,
and the right and left speakers.
For front/rear adjustment, push the
“AUDIO” knob repeatedly until “FAD”
appears on the display. Then turn the
knob to adjust the front/rear balance.
For left/right adjustment, push the
“AUDIO” knob repeatedly until “BAL”
appears on the display. Then turn the
knob to adjust the left/right balance.
To return to the middle position balances,
push and hold the “AUDIO” knob for more
than 2 seconds.
Auto EQ (Automatic equalization)
Radio
This button is designed to select the pre-
set equalization (EQ) settings for tone.
The preset settings are designed for 6
program types (Classical, Pop, Rock,
Jazz, Talk, Country). Settings consist of
the bass, midrange and treble control
positions which can be stored into the
custom setting.To use a preset EQ setting: Push the
“AUTO EQ” button until you reach the
setting you want. Every time you push
this button, the display toggles through the
six presets and custom setting in the fol-
lowing order; 1: Classical, 2: Pop, 3:
Rock, 4: Jazz, 5: Talk, 6: Country, 7: Cus-
tom.
To return to the manual mode (CUSTOM):
Push the “AUTO EQ” button until
“CUSTOM” appears on the display. Then
you can manually adjust the bass,
midrange, treble using the “AUDIO” knob.
(See “AUDIO”.) This will overwrite any
previous custom setting that was saved
with a station preset.
When a tuner preset is saved, the current
EQ preset name is saved along with the
tuner setting. Additionally, the current EQ
setting is saved with the current mode
(AM, FM1, FM2 or CD).
Compact disc auto changer
Push “AUTO EQ” to select the desired
preset equalization setting while playing a
CD. The equalization will be automatically
set whenever you play a CD.
CD/AUX (Compact Disc/Auxiliary)
Push “CD/AUX” to switch from radio to
compact disc auto changer operation. A
disc must already be loaded in the auto
changer.
When the audio is set into compact disc
operation, the display shows the track
number currently being played.
If the auto changer or another unit
equipped with the player malfunctions,
your audio system will display one of the
six following error messages.
Error messages
If the player malfunctions, your audio sys-
tem will display the following error mes-
sages.
“CHECK CD”:
The road is too rough. The disc should
play when the road is smoother.
The disc is dirty, scratched, wet or
upside down.
The air is very humid. If so, wait about
an hour and try again.
“PLAYER ERROR”: There may be a mo-
tor problem in loading or unloading a disc
or communication problem in the changer
unit.

’03 MATRIX_U (L/O 0201)
1292003 MY COROLLA MATRIX_U (OM12767U)
“NO CD”: The compact disc auto changer
is empty. Insert a disc.
If the disc is not playing correctly, for any
other reason, try a known good disc.
If the malfunction still exists, take your
vehicle to your Toyota dealer.
H/M (Hours/minutes adjustment)
These buttons are used to adjust the
clock time. For details, see “Clock” on
page 150 in Section 19.
INFO (Information)
When an RDS radio station transmits a
text message, “INFO” will be displayed. At
this time, push the “INFO” button to view
the text message. If the whole message
does not appear on the display, part of
the message will appear every three sec-
onds until the message is completed. To
scroll through the message at your own
speed, push the “INFO” button consecu-
tively. When the whole message has been
displayed, the message will disappear.
The message display will be canceled if
any button that affects the display is
pushed. To view the message again, push
the “INFO” button again.
The RDS audio system saves a message
until a new message is received. If the text message is not available when
you push “INFO” button, “NO INFO” will
appear on the display.
LOAD
This button is used to load the compact
discs in the compact disc auto changer
which is integrated with the radio. This
compact disc auto changer can store up
to 6 discs.
The key must be in the “ACC” or “ON”
position for the load function.
Loading one compact disc only—
To load one compact disc only, quickly
push and release the button. If you hold
the button too long, the mechanism will
change to the mode for loading multiple
compact discs. After pushing the button,
wait for the load/eject status light to turn
green then, insert a compact disc. After
the disc is loaded, the shutter of the slot
will close.
If no compact disc is inserted, the shutter
will close after 8 seconds.
If you push this button when the changer
is full, three beeps will sound.
Loading multiple compact di
scs—
To load multiple compact discs, push and
hold the button until you hear two beeps.
When the load/eject status light turns
green, insert a disc. Wait for the load/
eject status light to turn green before in-
serting the next disc.
If no compact disc is inserted, the shutter
will close after 8 seconds.
If you push this button when the changer
is full, three beeps will sound.
PWR/VOL (Power/Volume)
Push “PWR/VOL” to turn the audio system
on and off. Turn “PWR/VOL” to adjust the
volume.
P
T YPE (Program Types)
To turn on the PTY mode, push the
“P
T YPE” button while receiving an RDS
station. The current program type will ap-
pear on the display.
You can select one of the following pro-
grams by turning the tune (P
T YPE) knob
while the PTY mode is on.
Any Type
News
Inform (Information)
Sports

’03 MATRIX_U (L/O 0201)
1302003 MY COROLLA MATRIX_U (OM12767U)
Ta l k
Rock
Cls Rck (Classic rock)
Adlt Hit (Adult Hits)
Soft Rck
To p 4 0
Country
Oldies
Soft
Nostalga (Nostalgia)
Jazz
classicl (Classical)
R & B
Soft R & B
Language
Rel Musc (Religious Music)
Rel Talk (Religious Talk)
Persnlty (Personality)
Public
College
WeatherInterrupt function
If the radio in on the compact disc mode,
the radio will switch to the FM band with
the previous interrupt volume. The pro-
gram type and “Int” will appear. If the
radio in on the FM mode, the volume will
be adjusted to the previous interrupt vol-
ume. To cancel the interrupt function,
press “P·TYPE” or the selected mode but-
ton.
If the radio in on the PTY mode, program
types, except Any Type, may be selected
as interrupts. To set a program type as an
interrupt, push and hold “P·TYPE” while a
program type is displayed until you hear
a beep. The asterisk will appear when an
interrupt is set.
To turn off an interrupt while the radio in
on the PTY mode, select the program type
marked with an asterisk. Push and hold
“P·TYPE” until you hear a beep. The as-
terisk will disappear.
Note: ALERT! is a special program type
interrupt that is always on. If an emergen-
cy broadcast is received during reception
of anything other than AM broadcasting,
“ALERT” appears on the display and the
system adjust the volume to the interrupt
volume. Setting a PTY station
Program types can be stored to the preset
buttons. For details, see “1 2 3 4 5 6
(Preset or disc selection buttons)”.
Seeking a PTY station
If the radio is in the PTY mode, it will find
and play the next station up or down the
station band within the same program
type. If no PTY station will be found,
“NOT FOUND” will appear on the display
and the radio will return to the previous
frequency.
For details, see “SEEK”.
Scanning a PTY station
If the radio is in the PTY mode, it will
tune in the next station within the same
program type.
For details, see “SCAN”.
RCL (Recall)
This button is designed to change the dis-
play in each mode. You can also display
the clock by pushing this button when the
ignition switch is off.

’03 MATRIX_U (L/O 0201)
1312003 MY COROLLA MATRIX_U (OM12767U)
Radio
Push the “RCL” button to change the dis-
play among frequency, program service
name, and program type while receiving
RDS stations. To change what is normally
shown on the display, push this button
until you see the display you want, then
push and hold this button until the display
flashes and you hear a beep.
Compact disc auto changer
Push the “RCL” button to see how long
the current track has been playing. To
change what is normally shown on the
display (track number or elapsed time),
push this button until you see the display
you want, then push and hold this button
until the display flashes and you hear a
beep.RDM (Random)
There are two random features—you can
either listen to the tracks on all the com-
pact discs in the changer in random order,
or only listen to the tracks on a specific
compact disc in random order.
To randomly play the tracks on a disc:
Push and hold the “RDM” button until
“RANDOM ONE” appears on the display
and you hear a beep. The disc you are
listening to will play in random order. To
turn off the random feature, push this but-
ton again.
To randomly play all the tracks in the
changer:
Quickly push and release the “RDM” but-
ton. “RANDOM ALL” will appear on the
display and the auto changer will perform
all the tracks on all the discs in the
changer in random order. If you hear a
beep, the auto changer will perform all the
tracks on all the discs in the changer. To
turn off the random feature, push this but-
ton again.RPT (Repeat)
There are two repeat features—You can
either replay a disc track or a whole com-
pact disc.
Repeating a track:
Quickly push and release the “
” but-
ton while the track is playing. “REPEAT
TRACK” will appear on the display. If you
push and hold the button, the auto chang-
er will repeat the whole disc. When the
track ends, it will automatically replay. To
turn off the repeat feature, push this but-
ton again.
Repeating a disc:
Push and hold the “
” button until
“REPEAT CD” appears on the display. The
auto changer will repeat all the tracks on
the disc you are listening to. When the
disc ends, the auto changer will automati-
cally go back to the top track of the disc
and replay. To turn off the repeat feature,
push this button again.

’03 MATRIX_U (L/O 0201)
1322003 MY COROLLA MATRIX_U (OM12767U)
SCAN
Radio
You can either scan all the frequencies on
a band or scan only the preset stations
for that band.
To scan the preset stations:
Push and hold either side of the “SEEK/
SCAN” button for more than 4 seconds
until “PRESET SCAN” appears on the dis-
play and you hear two beeps. The radio
will tune in the next preset station up the
band, stay there for 5 seconds, and then
move to the next preset station. To cancel
scan and remain on current station, push
this button again.
To scan all the frequencies:
Push and hold either side of the “SEEK/
SCAN” button for about two seconds until
“SC” appears on the display and you hear
a beep. The radio will find the next station
up the station band, stay there for 5 se-
conds, and then scan again to the next
preset. To cancel scan and remain on cur-
rent station, push this button again. If you
hear two beeps, the radio will scan the
preset stations.
You can also scan only to stations with
the types of programs you want to listen
to or traffic announcements. (See
“P.TYPE”.)Compact disc auto changer
There are two scan features—you can ei-
ther scan the tracks on a specific disc or
scan the first tracks of all the discs in the
changer.
Scanning the tracks on a disc:
Push and hold either side of the “SEEK/
SCAN” button for about two seconds until
“SCAN” appears on the display and you
hear a beep. The auto changer will scan
all the tracks on the disc you are listening
to. If you hear two beeps, the auto chang-
er will scan the first track of all the discs
in the changer. To select a track, push
either side of this button again.
Scanning the first track of all the discs in
the changer:
Push and hold either side of the “SEEK/
SCAN” button for more than 4 seconds
until “DISC SCAN” appears on the display
and you hear two beeps. The auto chang-
er will scan the first track of the next
disc. To select a disc, push either side of
this button again.
SEEK (Seeking)
Radio
In the seek mode, the radio finds and
plays the next station up or down the
station band.
To seek the next station, quickly push and
release either side of the “SEEK/SCAN”
button. If you hear a beep, the radio will
scan the stations. (See “SCAN”.) Do this
again to find the station after that.
You can also seek only to stations with
the types of programs you want listen to
or traffic announcements. (See “P.TYPE”.)
Compact disc auto changer
By using this button, you can skip up or
down to a different track.
Push either side of the “SEEK/SCAN” but-
ton repeatedly until the number of the
track you want to listen to appears on the
display. If you want to return to the begin-
ning of the current track, quickly push the
“
” button one time.

’03 MATRIX_U (L/O 0201)
1332003 MY COROLLA MATRIX_U (OM12767U)
SONG LIST
This integrated sixdisc compact disc auto
changer has a feature called song list.
This feature is capable of saving 20 track
selections.
To save tracks into the song list feature,
perform the following steps:1. Turn the compact disc player on and load it with at least one disc. (See
“LOAD”.)
2. Make sure the disc changer is not in song list mode. “SLIST” should not
appear in the display. If “SLIST” is
present, push the “SONG LIST” button
to turn it off.
3. Select the desired disc by pushing the numbered button and then use the right
side of the “SEEK/SCAN” button to lo-
cate the track you want to save. The
track will begin to play.
4. To save the track, push and hold the “SONG LIST” button until you hear two
beeps.
5. Repeat step 3 and 4 for saving other selections.
If you try to save more than 20 selec-
tions, “SLIST FULL” will appear on the
display. To play the song list, push the “SONG
LIST” button. One beep will be heard and
“SLIST” will appear on the display. The
recorded tracks will begin to play in the
order that they were saved.
You may seek through the song list by
using the “SEEK/SCAN” button. Seeking
past the last saved track will return to the
first saved track.
To delete tracks from the song list, per-
form the following steps:
1. Turn the disc player on.
2. Push the “SONG LIST” button to turn the song list on. “SLIST” will appear
on the display.
3. Push either side of the “SEEK/SCAN” button to select the desired track to be
deleted.
4. Push and hold the “SONG LIST” button for more than two seconds until you
hear a beep. After two seconds of
pushing the button continuously, two
beeps will be heard to confirm that the
track has been deleted.
After a track has been deleted, the re-
maining tracks are moved up the list.
When another track is added to the song
list, the tracks will be added to the end
of the list. To delete the entire song list, perform the
following steps:
1. Turn the disc player on.
2. Push the “SONG LIST” button to turn song list on. “SLIST” will appear on
the display.
3. Push and hold the button for more than 4 seconds. A beep will be heard, fol-
lowed by two beeps after two seconds
and a final beep will be heard after 4
seconds. “SLIST EMPTY” will appear
on the display indicating that the song
list has been deleted.
If a disc is ejected, and the song list
contains saved tracks from that disc,
those tracks are automatically deleted
from the song list. Any tracks saved to
the song list again are added to the bot-
tom of the list.
To end the song list mode, push the
“SONG LIST” button. One beep will be
heard and “SLIST” will be removed from
the display.