2003 TOYOTA LAND CRUISER change time

51
2003 Land Cruiser 100 Navigation (OM60A00U)
When driving on a small angled Y −
shaped road.
 When driving on a spiral road.
 When driving on a slippery road such as
in sand, gravel, snow, etc.
 When driving on a long straight road.
 When freeway and surface streets run in
parallel.
 After moving by ferry or vehicle carrier.
 When a long route is searched during high
speed driving.
 When driving without setting the current
position calibration correctly.
 After repeating a change of directions by
going forward and backward, or turning
on a turntable in the parking lot.
 When leaving a covered parking lot or
parking garage.
 When a roof carrier is installed.
 When driving with the tire chains installed.
 When the tires are worn.
 After replacing a tire or tires. 
When using tires that are smaller or larger
than the factory specifications.
 When the tire pressure in any of the four
tires is not correct.
INFORMATION
If your vehicle cannot receive GPS sig-
nals, you can correct the current posi-
tion manually. For the information on
setting the current position calibration,
see page 79.
When turning at a wrong intersection off
the designated route guidance
 If you set more than one destination, auto
reroute will display a route returning to the
destination on the previous route when
you try to skip any of the destinations.
 When turning at an intersection, there is
no route guidance.
 When passing through the intersection,
there is no route guidance.
 During automatic rerouting, the route
guidance may not be available for the next
turn to the right or left.
 It may take a long time to operate auto re-
route during high speed driving. In auto
reroute, a detour route may be shown.
 After auto reroute, the route may not be
changed.
 An unnecessary U −turn may be shown or
announced.
 A location may have multiple names and
the system will announce one or more.
(a) Accurate current vehicle
position may not be shown in
the following cases:
(b) Inappropriate route guid-
ance may occur in the following
cases:

82
2003 Land Cruiser 100 Navigation (OM60A00U)
You can set the values shown on the Set-
up screen.
1. Push the
“MENU” switch.
1UE040
2. Touch the “Setup” switch to display
the Setup screen. Select your desired
items you want to set. Selected items will
be highlighted in green.
3UE001
3. Touch the “OK” switch on the screen
and the previous screen returns.
To default: Touch the
“Default” switch on
the screen. All of the settings can be de-
faulted.
Map color (day or night): You can select
your desired map color.
Auto reroute: You can set the system will or
will not automatically search for a new route
to the destination.
Estimated travel time: You can set to dis-
play the time required to reach the destina-
tion on the road guidance screen.
Adjust time zone: You can select your de-
sired time zone. Distance:
You can change “km” or “miles” to
display your desired units.
Notify seasonal restrict: You can select to
notify or not to notify a seasonal restriction.
Voice guide in all modes: You can set the
voice guide in all modes or not.
Current street name: You can select to
show or not to show a current street name on
the Map screen.
Setup

85
2003 Land Cruiser 100 Navigation (OM60A00U)
3UE004
To set the average speeds:
1. Touch the “Change speed” switch of
Estimated travel time.
2. Touch
or to set the average ve-
hicle speeds for driving on a Freeway,
Main street and Residential area.
If you touch the
“Default” switch, the de-
fault speed is set at each item.
3. After you finish setting the desired
speeds, touch the
“OK” switch. The Set-
up screen returns.
INFORMATION
 The displayed time to the destination
is the approximate driving time cal-
culated based on the speeds you se-
lected and your actual position
along the guidance route.
 The time shown may vary greatly de-
pending on your progress along the
route (which may be af fected by road
conditions such as traffic jams,
construction work, etc.)
 Up to 99 hours 59 minutes can be dis-
played.
1. Push the “MENU” switch.
1UE040
2. Touch the “Setup” switch.
3UE005
Adjusting time zone

89
2003 Land Cruiser 100 Navigation (OM60A00U)
3UE014
Date of notice: Input the next maintenance
date.
Distance of notice: Input the driving dis-
tance until the next maintenance check. You
can input a five−digit number for the driving
distance.
When you touch the
! switch on the
screen, the screen changes to display the
change name screen. Touch the keys to in-
put your desired name and then input the
conditions. After you input the information, touch the
“OK” switch. The screen then returns to
the Maintenance screen. The icon’s color will
change to green after the date or driving dis-
tance are input. The icon’s color will change
to orange when your vehicle needs to be ser-
viced. The following switches appear on the
Maintenance screen.
Delete all: Cancel all conditions which have
been input.
Reset all: Reset the item which has satisfied
either condition.
Touch the
“Off” switch of the Maintenance
screen, and the Information screen will no
longer be displayed.
INFORMATION
 For scheduled maintenance infor-
mation, please refer to the “Owner’s
Manual Supplement / Scheduled
Maintenance”.
 Depending on your driving or the
road conditions, the system may
have a timelag between the data
which has been input and the actual
date and driving distance.
Information items
Oil change
Replace oil filter
Rotate tires
Replace tires
Replace battery
Replace brake linings
Replace wiper blades
Replace engine coolant

124
2003 Land Cruiser 100 Navigation (OM60A00U)
UNG615
When you touch the ”RDS SRCH” switch
during FM reception, ”RDS SEARCH” ap-
pears and the radio starts to search RDS sta-
tion.
If any RDS station cannot be found, ”NO
RDS Stations Found” appears and the pre-
vious mode returns.
If RDS stations are found, the stations are
read and preset by program type. The FM
TYPE mode screen displays the ”** RDS
Stations Found” (** indicates the number of
stations which are found) and then RDS sta-
tions appear in the order of frequency. If in one program type, more than 6 stations
are found, the 6 stations are preset in the or-
der of the lower frequency.
Each time you push the ”
” or ””, the
program type changes as in the following:
 ROCK
 EASY LIS (Easy listening)
 CLS/JAZZ (Classical music and Jazz)
 R&B (Rhythm and Blues)
 INFORM (Information)
 RELIGION
 MISC.
 ALERT (Emergency message)
UNG617
If ”MSG” appears during FM reception,
touching the ”MSG” switch displays the mes-
sage display screen which indicates the text
message from the RDS station.
(e) TYPE (Program type)(f) Radio text message

130
2003 Land Cruiser 100 Navigation (OM60A00U)
unx608
5. Insert the magazine into the player as
indicated by the arrow ahead on the mag-
azine, close the door and console box.
When the magazine is set completely, the
system will be in a “Load” cycle for approxi-
mately 30 seconds while the system
searches for discs in the magazine. Upon
completion of this cycle, the DVD player unit
will be ready to play. If the “DISC” button is
pushed during the “Load” cycle, “LOAD” ap-
pears on the display until the system has
completed the load cycle, after which the
system will begin normal play.
CAUTION
To reduce the chance of injury in case
of an accident or a sudden stop, always
keep the console box closed while driv-
ing.
Push the “DISC” button if the magazine is
already loaded in the player.
“DVD CHANGER” appears on the display.
The discs set in the magazine are played
continuously, starting with disc number 1.
The disc number of the disc currently being
played, the track number and the time from
the beginning of the program are shown on
the display.
(b) Playing a disc

134
2003 Land Cruiser 100 Navigation (OM60A00U)
Precautions on DVD video disc
When recording with a DVD video or video
CD, audio tracks may not record in some
cases while the menu is displayed. As audio
will not play in this case, verify that the video
tracks are playing and then activate play-
back.
When playback of a disc is completed:
 If an audio CD is playing, the next CD will
be selected and playback will begin auto-
matically.
 If a DVD video or video CD is playing,
playback will stop or the menu screen will
be displayed. The next disc will not play
back automatically. (Audio tracks cannot
be heard while the disc is stopped)
The title/chapter number and playback time
display may not appear while playing back
certain DVD video discs.
CAUTION
Conversational speech on some DVDs
is recorded at a low volume to empha-
size the impact of sound effects. If you
adjust the volume assuming that the
conversations represent the maximum
volume level that the DVD will play, you
may be startled by louder sound effects
or when you change to a different audio
source. The louder sounds may have a
significant impact on the human body
or pose a driving hazard. Keep this in
mind when you adjust the volume.
The ”DVD Hint!” screen appears when
the video screen is first displayed after
you turn the ignition key to ”ACC” or
”ON”.
Touch the ”OK” switch when you read the
message.

137
2003 Land Cruiser 100 Navigation (OM60A00U)
(v) Searching by title
unx622
Enter the title number using “”, “+” and
“+10” switches and touch “Enter”. The
player starts playing video for that title
number.
When you push “
” or “” on the “TRACK”
switch, you can select a chapter.
Touch “Back”, the previous screen returns. (vi) Changing the subtitle language
unx620
Each time you touch “Sub Title”, the lan-
guage is selected from
the ones stored in
the discs and changed.
To turn off the subtitle, touch “Hide”.
Touch “Back”, the previous screen returns. (vii) Changing the audio languageEach time you touch “Audio”, the lan-
guage is selected
from the ones stored in
the discs and changed.
Touch “Back”, the previous screen returns.