2003 TOYOTA LAND CRUISER audio

120
2003 Land Cruiser 100 Navigation (OM60A00U)
UNG608
BASS ”+” or ””: Adjusts low−pitched
tones.
MID ”+” or ””: Adjusts mid −pitched tones.
TREB ”+” or ””: Adjusts high−pitched
tones.
”Front” or ”Rear”: Adjusts sound balance
between the front and rear speakers.
”L” or ”R”: Adjusts sound balance between
the left and right speakers.
”OK”: The previous screen returns. The antenna automatically extends when
the radio is on or the radio RDS system is on,
and retracts when the radio mode is off.
I17003
To adjust the height of the antenna manu-
ally, push the switch.
Clean the antenna mast periodically with a
clean dry cloth.
CAUTION
Before extending the antenna,
confirm
that no one is close enough to get
injured.
NOTICE
 To prevent damage to the antenna,
make sure it is retracted before
driving your vehicle through an
automatic car wash.
 Antenna mast have to be extended
higher than 100 mm (3.94 in) length
when the audio is on. Extend the an-
tenna mast when the radio signal is
weak.
(d) Your radio antenna

125
2003 Land Cruiser 100 Navigation (OM60A00U)
UNG618
If a new message is received with the first
text message on the display, ”MSG” appears
on the corner of the screen again. When you
touch the ”LATEST MESSAGE” switch, the
new message appears.
The RDS audio system can store three mes-
sages consisting of 64 characters in
memory. To store a message in memory,
touch the ”STORE” switch until you hear a
beep.
If 3 messages are already stored in memory,
the oldest message will be overwritten by the
new message. To recall a radio text message, touch the
”RECALL”
switch. Each time you touch the
switch, the available messages will be dis-
played beginning with the newest one.
When you touch the ”OK” switch, the pre-
vious screen returns.
unc614
When you insert a cassette tape, the ex-
posed tape should face to the right.
The player will automatically start when you
insert a cassette tape. At this time, ”Tape”
appears on the display.
If a metal or chrome equivalent cassette tape
is put in the cassette player, the player will
automatically recognize it and ”MTL” ap-
pears on the display.
To stop or eject the cassette tape, push the
”
” button.
Cassette tape player
o
peration
(a) Playing a cassette tape

128
2003 Land Cruiser 100 Navigation (OM60A00U)
When the end of the tape is reached, the
player automatically reverses sides and re-
sumes normal play.
Push this button on the lower side to skip
backward. Push the button until ”REW” and
the number you want to skip appear on the
display.
 If you set ”REW 1”, the player will rewind
to the beginning of the current program.
 When counting the number of programs
you want to rewind, remember to count
the current program as well. For example,
if you want to rewind to a song that is two
before the song you are listening to, push
this button until ”REW 3” appears on the
display.
When the beginning of the tape is reached,
the player automatically resumes normal
play.
There must be at least 5 seconds of blank
space between programs for this feature to
work correctly.
”RPT”, ”SKIP” or ”Automatic program
selection” features: These features may
not work well with some spoken word, live or
classical recordings.
DVD player operation
The DVD player can play audio CDs, DVD
video discs and video CDs.
For appropriate discs for this player, see ”Car
audio/video system operating hints” on page
146.
For safety reasons, you can enjoy DVD vid-
eo discs and video CDs only when the ve-
hicle is completely stopped with the ignition
switch in the “ACC” or “ON” position and the
parking brake applied. While you are driving,
you can hear audio alone even in the DVD
video or video CD mode.
The DVD player can play the discs labeled
as shown below.
unc602
1. Pull the lock release lever and open the
console box.
(a) Inserting discs

129
2003 Land Cruiser 100 Navigation (OM60A00U)
unc603
2. Push this button to eject the magazine.
unx606
3. Pull out the tray while pushing the lock
release button.
unx607
4. Put a disc on the tray with its label face
up and push the tray back into the maga-
zine.
If the label faces down, the disc cannot be
played. In this case, “DISC CHECK” and
disc number appears on the display.
If a disc which is not playable is inserted,
”DISC CHECK” will also appear on the
screen. For appropriate discs for this paper,
see ”Car audio/video system operating
hints” on page 146.

131
2003 Land Cruiser 100 Navigation (OM60A00U)
On the screen: Touch the desired disc
number.
The selected disc number is highlighted in
green.
The player will start playing the selected disc
from the first track.
On the audio panel: Push the “” or “”
side of the “DISC” button.
When you release the button, the player will
start playing the selected disc from the first
track. (i) Playing an audio CD
unx610
Push the ”AUDIO” button to display this
screen. You can operate the switches
and choose the number of the disc you
want to play. The selected disc is auto-
matically played.
(ii) Selecting a desired track
“TRACK” button: Use for direct access to
a desired track.
Push either side of the “TRACK”
button and
hold it until the desired track number appears
on the display. As you release the button, the
player will start playing the selected track
from the beginning.
Fast forward: Touch the “
” switch and
hold it to fast forward the disc. When you re-
lease the switch, the player will resume play-
ing from that position.
(c) Selecting a desired disc(d) Operating an audio CD

132
2003 Land Cruiser 100 Navigation (OM60A00U)
Reverse: Touch the “” switch and hold it
to reverse the disc. When you release the
switch, the player will resume playing. (iii) Searching for a desired track or a
disc
Touch the “SCAN” switch.
“SCAN” will be highlighted in green. The
player will play the next track for 10 seconds,
then scan again. To select a track, touch the
“SCAN” switch a second time. If the player
reaches the end of the disc, it will continue
scanning at track 1. Touch the “DISK SCAN” switch.
“DISC SCAN” will be highlighted in green.
The program at the beginning of each disc
will be
played for 10 seconds. To continue lis-
tening to the program of your choice, touch
the “DISC SCAN” switch a second time.
After all the audio disc are scanned in one
pass, normal play resumes.

133
2003 Land Cruiser 100 Navigation (OM60A00U)
(iv) Other functions
“RPT” switch: Use it for automatic repeat of
the track you are currently listening to.
Touch the switch while the track is playing.
When the track is finished, the player will au-
tomatically go back to the beginning of the
track and play the track again. To cancel it,
touch the switch once again.
“DISC RPT” switch: Use it for automatic re-
peat of the disc you are currently listening to.
Touch the switch while the disc is playing.
When the disc is finished, the player will auto-
matically go back to the beginning of the disc
and play the disc again. To cancel it, touch
the switch once again. “RAND” switch: Use it for automatic and
random selection of the disc which you are
currently listening to.
When the switch is touched, the system se-
lects a track in the disc you are currently lis-
tening
to. To cancel it, touch the switch once
again.
“DISC RAND” switch: Use it for automatic
track selection for all the audio discs and play
by the system.
When the switch is touched, the system se-
lects a track in all the audio discs in the mag-
azine which is set and plays it. To cancel it,
touch the switch once again.
”TITLE” switch: Use it for displaying the
song title and track number while the CD −
TEXT disc is playing.
The switch is not displayed on the screen
while the CD −TEXT disc is not playing. Up
to 29 letters can be displayed. To cancel it,
touch the ”TITLE OFF” switch. NOTE: The playback condition of some
DVD video discs may
be determined by a
DVD video software producer. This DVD
player plays a disc as the software pro-
ducer intended. So some functions may
not work properly. Be sure to read the in-
struction manual for the DVD video disc
separately provided. For the detailed in-
formation about DVD video discs, see
”(h) DVD player and DVD video disc infor-
mation”.
(e) Operating a DVD video disc

134
2003 Land Cruiser 100 Navigation (OM60A00U)
Precautions on DVD video disc
When recording with a DVD video or video
CD, audio tracks may not record in some
cases while the menu is displayed. As audio
will not play in this case, verify that the video
tracks are playing and then activate play-
back.
When playback of a disc is completed:
 If an audio CD is playing, the next CD will
be selected and playback will begin auto-
matically.
 If a DVD video or video CD is playing,
playback will stop or the menu screen will
be displayed. The next disc will not play
back automatically. (Audio tracks cannot
be heard while the disc is stopped)
The title/chapter number and playback time
display may not appear while playing back
certain DVD video discs.
CAUTION
Conversational speech on some DVDs
is recorded at a low volume to empha-
size the impact of sound effects. If you
adjust the volume assuming that the
conversations represent the maximum
volume level that the DVD will play, you
may be startled by louder sound effects
or when you change to a different audio
source. The louder sounds may have a
significant impact on the human body
or pose a driving hazard. Keep this in
mind when you adjust the volume.
The ”DVD Hint!” screen appears when
the video screen is first displayed after
you turn the ignition key to ”ACC” or
”ON”.
Touch the ”OK” switch when you read the
message.