2003 TOYOTA COROLLA fog light

[x] Cancel search: fog light

Page 7 of 252

TOYOTA COROLLA 2003 E120 / 9.G Owners Manual ’03 Corolla U (L/O 0201)
32003 MY COROLLA_U (OM12744U)
1. Headlight and turn signal switch andfront fog light switch
2. Wiper and washer switches
3. Emergency flasher switch
4. Car audio
5. Clock
6.

Page 77 of 252

TOYOTA COROLLA 2003 E120 / 9.G Owners Manual ’03 Corolla U (L/O 0201)
732003 MY COROLLA_U (OM12744U)
OPERATION OF INSTRUMENTS AND
CONTROLS
Lights, Wipers and Defogger
Headlights and turn signals74
. . . . . . . . . . . . . . . . . . . . . . .

Page 81 of 252

TOYOTA COROLLA 2003 E120 / 9.G Owners Manual ’03 Corolla U (L/O 0201)
772003 MY COROLLA_U (OM12744U)
To turn on the front fog lights, twist
the band of the headlight/turn signal
lever. They will come on only when the
headlights are on low beam

Page 83 of 252

TOYOTA COROLLA 2003 E120 / 9.G Owners Manual ’03 Corolla U (L/O 0201)
792003 MY COROLLA_U (OM12744U)
To turn on the windshield wipers, move
the lever to the desired setting.
The key must be in the “ON” position.Lever position
Speed setting

Page 128 of 252

TOYOTA COROLLA 2003 E120 / 9.G Owners Manual ’03 Corolla U (L/O 0201)
1242003 MY COROLLA_U (OM12744U)
If you turn the air flow selector to the
another position, the air  intake mode
returns to FRESH mode automatically.
For details about air fl

Page 230 of 252

TOYOTA COROLLA 2003 E120 / 9.G Owners Manual ’03 Corolla U (L/O 0201)
2262003 MY COROLLA_U (OM12744U)
The inside of the lens of exterior lights
such as headlights may temporarily  fog up
when the lens becomes wet in the rain or
in a car wash.

Page 233 of 252

TOYOTA COROLLA 2003 E120 / 9.G Owners Manual ’03 Corolla U (L/O 0201)
2292003 MY COROLLA_U (OM12744U)
1. Loosen the retainer nut and take outthe beam unit.2. Unplug the connector while depress-ing on the tab.
If the connector is tight, wiggle

Page 234 of 252

TOYOTA COROLLA 2003 E120 / 9.G Owners Manual ’03 Corolla U (L/O 0201)
2302003 MY COROLLA_U (OM12744U)
4. Disconnect the cords.5. Release the bulb retaining springand remove the bulb. Install a new
bulb and the bulb retaining spring.
To install
Page:   1-8 9-16 next >