2003 TOYOTA 4RUNNER navigation

4Runner_Navi_U (L/O 0208)
92003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
5. By Marked Point: You can register your own favorite destinations as a “Marked Point”. The system allows you to store up 100
marked points. See page 19 for the detailed steps.
6. By Previous Destination: You can select a destination from any of the last 20 previously set destinations. See page 20 for
the detailed steps.
7. By Emergency: You can select one of the three points of emergency service points that have been already stored in the system’s
database. See page 21 for the detailed steps.
8. By Intersection: You can enter the names of two intersec ting streets. This is helpful if you do not know the specific street
address of your destination but know the general vicinity. See page 22 for the detailed steps.
9. By Freeway Entrance/Exit: You can enter the name of the freeway (interstate) entrance or exit. See page 23 for the detailed
steps.
10. By Previous Starting Point: You can enter a point where the system has started to guide last time. See page 24 for the detailed
steps.

4Runner_Navi_U (L/O 0208)
102003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
11. By Map Selection: You can select a destination simply by touching the location on the displayed map. See page 24 for the
detailed steps.
INFORMATION
 When inputting the destination, the
response to the switch may be
slow.
 “Points of Interest” registration is
made based on the NAVTECH
“Standard POI Inclusion List” and
infoUSA POI data.
 If there is no point registered,
switches such as “Marked Point”,
“Previous Destination” and “Pre-
vious Starting Point” are dimmed
and not available.
 The route for returning may not be
the same as that for going.
 The route guidance to the destina-
tion may not be the shortest route
or a route without traffic conges-
tion.
 Route guidance may not be avail-
able if there is no road data for the
specified location.When setting the destination, you
should use the map on a scale of
one half mile or smaller.
 To select an “Address”, “Point of
Interest”, “Freeway Entrance/Exit”
or “Intersection” in a different area,
it is necessary to change the
search area.
CAUTION
While you are driving, be sure to
follow traffic regulations and keep
the road condition in mind. If a traf-
fic sign on the road has been
changed, the route guidance may
provide wrong information.
Touch the switch on the Destina-
tion input screen.
The screen changes and displays the
map location of your home.
Guidance starts from your current posi-
tion to your home immediately after you
touch the
switch during driving.
For the steps to register your home, see
“Registering your home” on page 41.
Destination input by HOME

4Runner_Navi_U (L/O 0208)
112003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Touch any of — (preset des-
tination) switches on the “Destination”
screen.
The screen changes and displays the
map location of the preset destination.
Guidance starts from your current posi-
tion to the preset destination immediately
after you touch the preset destination
switch.
For the steps to register a preset destina-
tion, see “Registering preset destination”
on page 45.
L00020
There are 2 ways to input a destina-
tion by address. Touch the
“Address” switch on the
destination screen. The “Address”
screen appears, and then you can in-
put a house number.
Touch letters directly on the screen to
input a house number.
L00021
After inputting a house number, touch the
“Enter” switch to display the screen
which you can input a street name.
It is possible to input a street name first.
Touch the
“Street” switch to display
the screen which you can input a street
name.
Destination input by PRESET
DESTINATION Destination input by
ADDRESS(a) Inputting a house number
and a street name

4Runner_Navi_U (L/O 0208)
122003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
L00022
After each letter is input, the system
searches the database for street names
that match. Alphabet keys are dimmed if
the database does not have a match for
the next letter in the remaining list of
matching street names.
When you input numerals, touch the
“0–9” switch to display the screen
for numeral input.
Based on your input, the number of
matching sites appears at the top right of
the screen. After the number decreases
to some extent, touch the
“List” switch
to display the street selection list. If the
number of matches decreases to 4 or
less, the screen changes automatically to
the selection list.
L00015
When you find your desired street
name, touch
of the item. The
screen changes and displays the map
location of the selected destination
and the route preference. (See “(a) En-
tering destination” on page 25.)
If the same address exists in more than
one city, the current screen changes to
the “City Select” screen. Select or enter
your desired city.
L00023
If you input a street name first, the
screen changes. You can then input the
house number.
L00024
If the above screen appears, you can
select an address range on that screen.

4Runner_Navi_U (L/O 0208)
132003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
The screen for selecting last 5 cities ap-
pears if you touch the
“City” switch on
the “Address” screen on page 11.
L00025
Last 5 cities are displayed on the
screen.
If you have not used the navigation yet,
any city is not displayed on the screen.
Touch the
of the desired city
name. The current screen changes to
the screen which is for inputting a
street name.
All cities: All cities are selected.
Near 5 cities: Near 5 cities are dis-
played. Selecting a city in the list
changes to the display to input a street
name.
Input city name: The screen for inputting
the city name appears. The screen for inputting a city name ap-
pears if you touch the
“Input city
name”
switch on the “Address” screen.
L00026
Input the city name.
After the number decreases to some
extent, touch the
“List” switch to
display the city selection list. If the
number of matches decreases to 4 or
less, the screen changes automatically
to the selection list.
Touch the
of the desired city
name. The current screen changes to the
screen which is for inputting a street
name. After inputting a street name,
the screen may change to the screen
which is for inputting a house number.
Input a house number. Then touch the
“Enter” switch to display the map
screen.
The screen changes and displays the
map location of the selected destina-
tion and the route preference. (See “(a)
Entering destination” on page 25.)
(b) Selecting a city to search

4Runner_Navi_U (L/O 0208)
142003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
There are 3 ways to select a point of
interest location.
(a) Input the name directly
(b) Selecting a city to search
(c) Selecting from the categories
It will not take a long time for you to
find your destination if you use a com-
bination of the searching ways of (a),
(b) and (c).Touch the “POI” switch on the “Des-
tination” screen.
L00027
The “POI” screen appears, and then you
can input the name of the point of inter-
est.
Touch letters directly on the screen to
input a name. When you input numerals,
touch the
“0–9” switch to display the
screen for numeral input.
If the number of site s becomes 4 or less,
or if you touch the
“List” switch at the
bottom right of the screen, the screen
changes and displays a list of sites.
L00028
Touch the of your desired destina-
tion. The screen changes and displays
the map location of the selected des-
tination and the route preference. (See
“(a) Entering destination” on page 25.)
If the same name exists in more than
one city, you can search it more easily
with the
“City” and “Category”
switch. (See “(b) Selecting a city to
search” and “(c) Selecting from the cate-
gories”.)
Destination input by POI (a) Input the name directly

4Runner_Navi_U (L/O 0208)
152003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Touch the “City” switch on the “POI”
screen.
L00029
Last 5 cities are displayed on the
screen.
If you have not used the navigation yet,
any city is not displayed on the screen.
Touch the
of the desired city
name. The current screen changes to
the screen which is for inputting a
name of POI.
All cities: All cities are selected.
Near 5 cities: Near 5 cities are dis-
played. Selecting a city in the list
changes to the display to input the name
of the POI.
Input city name: The screen for inputting
the city name appears.
L00030
Input the city name.
If the number of site s becomes 4 or less,
or if you touch the
“List” switch on the
screen, the screen changes and displays
the selection list.
Touch the
of the desired city name.
After entering the city name, input the
name of the POI. Touch the
“Category” switch on the
“POI” screen.
L00031
The categories are shown on the
screen. When you touch the symbol
switch of your desired category, more
detailed categor ies are shown.
L00032
When you touch the of your de-
sired category, the screen changes and
displays the menu to input a name.
(b) Selecting a city to search (c) Selecting from the
categories

4Runner_Navi_U (L/O 0208)
162003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
L00033
Once you have selected a category, you
can touch letters directly on the screen
to input a name. To input numerals, touch
the
“0–9” switch to display the screen
for numeral input.
If the number of site s becomes 4 or less,
or if you touch the
“List” switch at the
bottom right of the screen, the screen
changes and displays a list of sites.
L00034
L00183
If you input the name of a specific point
of interest and there are more than two
sites with the same name, the
“Dist.
sort”
switch will be shown. Touch the
“Dist. sort” switch on the screen to
display a listing of all items based on the
distance from your current location. When you touch the
of your de-
sired item, the screen changes and
displays the map lo cation of the se-
lected destination and the route prefer-
ence. (See “(a) Entering destination”
on page 25.)
L00036
Touch the “Info.” switch on the screen
to display the selected destination name,
address and telephone number.
INFORMATION
The desired point of interest can be
displayed on the map screen. (For
details, see page 51.)