2003 SUBARU LEGACY suspension

[x] Cancel search: suspension

Page 57 of 472

SUBARU LEGACY 2003 3.G Owners Manual 1
Seat, seatbelt and SRS airbags1-33
–
 CONTINUED  –
�
Precautions against vehicle modification CAUTION
Do not perform any of the following modifications. Such modifi- cations can interfere with p

Page 89 of 472

SUBARU LEGACY 2003 3.G Owners Manual 1
Seat, seatbelt and SRS airbags1-65
–
 CONTINUED  –
�
Replacement of seat fabric or leather (only for vehicles with
SRS side airbags) � Installation of additional fabric or leather on the front s

Page 286 of 472

SUBARU LEGACY 2003 3.G Owners Manual 7-36VDC (Vehicle Dynamics Control) system  (if equipped)
WARNING
Always use the utmost care in driving  — overconfidence because
you are driving with a VDC system equipped vehicle could easily lead

Page 310 of 472

SUBARU LEGACY 2003 3.G Owners Manual 8-12When the vehicle has been left parked after use on roads heavily cov- 
ered with snow, or has been left parked during a snowstorm, icingmay develop on the brake system, which could cause poor brak

Page 314 of 472

SUBARU LEGACY 2003 3.G Owners Manual 8-16vehicle and may cause rubbing on sharp turns. Listed below is the winter tire size that we recommend.
Recommended winter (snow) tire size P215/60R16 Studless
�Tire chains
CAUTION
Tire chains canno

Page 326 of 472

SUBARU LEGACY 2003 3.G Owners Manual 8-28Trailer towing 
Your car is designed and intended to be used primarily as a passenger- 
carrying vehicle. Towing a trailer puts additional loads on your car
’s en-
gine, drivetrain, brakes, tire

Page 354 of 472

SUBARU LEGACY 2003 3.G Owners Manual 9-16the radiator. After the pressure has been fully released, remove the 
cap by pressing down and turning it.
Towing
WARNING
Never tow AWD vehicles (both AT and MT) with the front wheelsraised off th

Page 360 of 472

SUBARU LEGACY 2003 3.G Owners Manual 9-22�
Using a flat-bed truck
HB8008AA
This is the best way to transport your vehicle. Use the following proce- 
dures to ensure safe transportation.
1. Shift the selector lever into the  “P” posit
Page:   1-8 9-16 next >